Mail Index

• Thread Index

• Welcome to the femm eGroup
  • From: "David Meeker" <dcm3c@aol.com>
• [femm] Problems with DXF files
  • From: "Gabriele Bellussi" <bellussi@libero.it>
• [femm] Strange looking nonlinear curve
  • From: "James Peng" <james_p_peng@hotmail.com>
• [femm] Re: Strange looking nonlinear curve
  • From: "David Meeker" <dmeeker@foster-miller.com>
• [femm] Problems with axisymmetric problems
  • From: Werner Scholz <e9426502@student.tuwien.ac.at>
• [femm] Re: Problems with axisymmetric problems
  • From: Dcm3c@aol.com
• [femm] output files
  • From: hm3724@hotmail.com
• [femm] Re: output files
  • From: Dcm3c@aol.com
• [femm] source modeling
  • From: Masoud Movahhedy <m7723200@cic.aku.ac.ir>
• [femm] No Subject
  • From: "Rishi SHAH" <R.R.D.Shah@lboro.ac.uk>
• [femm] Re: No Subject
  • From: Edwin Spencer <edwin.spencer@mscsoftware.com>
• [femm] troubles with triangle.exe
  • From: gascon@cnrs-orleans.fr
• [femm] Re: output files
  • From: hm3724@hotmail.com
• [femm] Moron's guide
  • From: i.cox@rhbnc.ac.uk
• [femm] Re: Moron's guide
  • From: dcm3c@aol.com
• [femm] No Subject
  • From: mathewsd@earthlink.net
• [femm] What happens with 0 side length for blocks?
  • From: istokesrees@tssuk.co.uk
• [femm] AutoSave
  • From: istokesrees@tssuk.co.uk
• [femm] Properties Reference
  • From: istokesrees@tssuk.co.uk
• [femm] Re: troubles with triangle.exe
  • From: Dcm3c@aol.com
• [femm] Re: No Subject
  • From: Dcm3c@aol.com
• [femm] test
  • From: Masoud Movahhedy <m7723200@cic.aku.ac.ir>
• [femm] R: test
  • From: "Gabriele Bellussi" <bellussi@libero.it>
• [femm] DC MOTOR DESIGN BOOKS
  • From: tsiporak@hotmail.com
• [femm] Axis-symmetric modelling
  • From: "Peter J. Ellis" <peter.ellis@paradise.net.nz>
• [femm] Re: Axis-symmetric modelling
  • From: Dcm3c@aol.com
• [femm] Re: DC MOTOR DESIGN BOOKS
  • From: Dcm3c@aol.com
• [femm] Re: Old books on DC machines
  • From: mathewsd@earthlink.net
• [femm] Information
  • From: niki@email.ro
• [femm] Re: DC MOTOR DESIGN BOOKS
  • From: Cristian Nechita <niki@email.ro>
• [femm] holding force
  • From: "Gabriele Bellussi" <bellussi@libero.it>
• [femm] R: Information
  • From: "Gabriele Bellussi" <bellussi@libero.it>
• [femm] One more old book on motors
  • From: mathewsd@earthlink.net
• [femm] tutorial
  • From: Marctt2@aol.com
• [femm] Re: tutorial
  • From: Dcm3c@aol.com
• [femm] Re: tutorial
  • From: Marctt2@aol.com
• [femm] Problems with non-linear B-H-curves
  • From: Kuepferling Michaela <kuepfer@xphys.tuwien.ac.at>
• [femm] Problems with FEMMPLOT
  • From: Kuepferling Michaela <kuepfer@xphys.tuwien.ac.at>
• [femm] Re: Problems with non-linear B-H-curves
  • From: David Meeker <dmeeker@foster-miller.com>
• [femm] No Subject
  • From: "Rishi SHAH" <R.R.D.Shah@lboro.ac.uk>
• [femm] Re: No Subject
  • From: Dcm3c@aol.com
• [femm] Drawing circles
  • From: marctt2@aol.com
• [femm] Another AC analysis question
  • From: marctt2@aol.com
• [femm] Response to no subject
  • From: "Vladimir V. Popov" <vpopov@elmech.mpei.ac.ru>
• [femm] Re: No Subject
  • From: "Rishi SHAH" <R.R.D.Shah@lboro.ac.uk>
• [femm] Re: Drawing circles & Another AC analysis question
  • From: Dcm3c@aol.com
• [femm] Re: Drawing circles & Another AC analysis question
  • From: Marctt2@aol.com
• [femm] Re: Drawing circles & Another AC analysis question
  • From: Dcm3c@aol.com
• [femm] Re: Drawing circles & Another AC analysis question
  • From: Marctt2@aol.com
• [femm] Multi-turn coils for AC analysis
  • From: Marctt2@aol.com
• [femm] Re: Drawing circles & Another AC analysis question
  • From: Dcm3c@aol.com
• [femm] User's manual
  • From: mathewsd@earthlink.net
• [femm] Re: User's manual
  • From: Dcm3c@aol.com
• [femm] Femmview plots
  • From: istokesrees@tssuk.co.uk
• [femm] Hi!
  • From: Agnaldo Souza Pereira <agnaldo@if.ufrj.br>
• [femm] Re: No Subject
  • From: "James Peng" <james_p_peng@hotmail.com>
• [femm] Re: Hi!
  • From: Cristian Nechita <niki@email.ro>
• [femm] Re: Hi!
  • From: B00r1s23@aol.com
• [femm] Re: Femmview plots
  • From: Dcm3c@aol.com
• [femm] Re: Hi!
  • From: Dcm3c@aol.com
• [femm] Re: Hi! (re: magnetic launcher)
  • From: "David Meeker" <dcm3c@aol.com>
• [femm] Re: magnetic launcher
  • From: mathewsd@earthlink.net
• [femm] Re: magnetic launcher
  • From: "James Peng" <james_p_peng@hotmail.com>
• [femm] Re: Hi!
  • From: Agnaldo Souza Pereira <agnaldo@if.ufrj.br>
• [femm] Re: Hi! (for Agnaldo)
  • From: frederic.sirois@polymtl.ca
• [femm] FEMM files' format and other
  • From: Sincro <tecnico@sincro.it>
• [femm] Re: FEMM files' format and other
  • From: Dcm3c@aol.com
• [femm] Current Density X-Y plot problems
  • From: "Marty Perry" <mperry@azcore.com>
• [femm] Re: Current Density X-Y plot problems
  • From: Dcm3c@aol.com
• [femm] Simmetry on planar problems
  • From: Sincro <tecnico@sincro.it>
• [femm] Re: Current Density X-Y plot problems
  • From: "Marty Perry" <mperry@azcore.com>
• [femm] No Subject
  • From: Renuka Rajput <renuka@cat.ernet.in>
• [femm] Re: No Subject
  • From: dilip <evelect@vsnl.com>
• [femm] Re: Simmetry on planar problems
  • From: Dcm3c@aol.com
• [femm] Re: Current Density X-Y plot problems
  • From: Dcm3c@aol.com
• [femm] Torroid
  • From: "Dr Mark Snoswell" <ms@adam.com.au>
• [femm] View plots
  • From: "Dave Squires" <djsquires@plix.com>
• [femm] Re: View plots
  • From: Marctt2@aol.com
• [femm] Re: View plots
  • From: David Meeker <dmeeker@foster-miller.com>
• [femm] Re: View plots
  • From: Dave Squires <djsquires@plix.com>
• [femm] Re: FEMM files' format and other
  • From: Agnaldo Souza Pereira <agnaldo@if.ufrj.br>
• [femm] Re: FEMM files' format and other
  • From: David Meeker <dmeeker@foster-miller.com>
• [femm] FEMM For Linux?
  • From: Angelo Rossi <vpqro@tin.it>
• [femm] Re: FEMM For Linux?
  • From: David Meeker <dmeeker@foster-miller.com>
• [femm] Re: FEMM For Linux?
  • From: Angelo Rossi <vpqro@tin.it>
• [femm] Re: FEMM files' format and other
  • From: "Bruce McGee" <mcgee@mcmillan-mcgee.com>
• [femm] Re: FEMM For Linux?
  • From: Angelo Rossi <vpqro@tin.it>
• [femm] FEMM for LINUX
  • From: Angelo Rossi <vpqro@tin.it>
• [femm] Something Wrong
  • From: Agnaldo Souza Pereira <agnaldo@if.ufrj.br>
• [femm] Re: Something Wrong
  • From: Dcm3c@aol.com
• [femm] Saturation Problems
  • From: "sunill nanayakkara" <sunilnana@mail.ewisl.net>
• [femm] Re: Saturation Problems
  • From: Dave Squires <djsquires@plix.com>
• [femm] No Subject
  • From: riad kechrpud <r_kechroud@yahoo.fr>
• [femm] Re: No Subject
  • From: "Torr-Tech Ltd." <sunilnana@mail.ewisl.net>
• [femm] Gsmh GetDP help
  • From: Victor Bellido-Gonzalez <victor@gencoa.demon.co.uk>
• [femm] design
  • From: "Torr-Tech Ltd." <sunilnana@mail.ewisl.net>
• [femm] Can you help me?
  • From: "Vladimir V. Popov" <vpopov@elmech.mpei.ac.ru>
• [femm] Re: Can you help me?
  • From: David Meeker <dmeeker@foster-miller.com>
• [femm] To David Meeke - Bug found
  • From: Dave Squires <djsquires@plix.com>
• [femm] Re: Can you help me?
  • From: Agnaldo Souza Pereira <agnaldo@if.ufrj.br>
• [femm] Troubles with Triangle
  • From: Agnaldo Souza Pereira <agnaldo@if.ufrj.br>
• [femm] Re: Various
  • From: David Meeker <dmeeker@foster-miller.com>
• [femm] Re: Various
  • From: Dave Squires <djsquires@plix.com>
• [femm] Can you help me?
  • From: riad kechrpud <r_kechroud@yahoo.fr>
• [femm] Re: Various
  • From: Ghizela OLARU <golaru@bioge.ubbcluj.ro>
• [femm] Re: Can you help me?
  • From: "Javier Mora" <mora@cimne.upc.es>
• [femm] Re: Can you help me?
  • From: riad kechrpud <r_kechroud@yahoo.fr>
• [femm] Re: Can you help me?
  • From: riad kechrpud <r_kechroud@yahoo.fr>
• [femm] Re: Can you help me?
  • From: David Meeker <dmeeker@foster-miller.com>
• [femm] thermal analysis
  • From: dilip <evelect@vsnl.com>
• [femm] Re: thermal analysis
  • From: Marctt2@aol.com
• [femm] lamination core losses
  • From: "chronis" <pvallian@central.ntua.gr>
• [femm] Re: lamination core losses
  • From: Dcm3c@aol.com
• [femm] lamination fill factor
  • From: Tecnico <tecnico@sincro.it>
• [femm] No Subject
  • From: Juan Luis Villa <jvilla@posta.unizar.es>
• [femm] Re: lamination fill factor
  • From: David Meeker <dmeeker@foster-miller.com>
• [femm] Materials....
  • From: "Scott Norton" <scott_norton@surromed.com>
• [femm] Re: No Subject / Materials....
  • From: Dcm3c@aol.com
• [femm] torque calculation
  • From: Tecnico <tecnico@sincro.it>
• [femm] part motor stator modeling???
  • From: "chronis" <pvallian@central.ntua.gr>
• [femm] Re: part motor stator modeling???
  • From: "chronis" <pvallian@central.ntua.gr>
• [femm] Re: part motor stator modeling???
  • From: Dcm3c@aol.com
• Re: [femm] Adress
  • From: David Meeker <dmeeker@foster-miller.com>
• high schoool science project
  • From: jtheobald@cannondesign.com
• Re: [femm] high schoool science project
  • From: "ernestfreeman" <ernestfreeman@email.msn.com>
• Re: [femm] high schoool science project
  • From: mdnicewander@aol.com
• parametric study
  • From: MANSOOR ALAM <mansoorzai@yahoo.com>
• boundary conditions
  • From: Steve Ryder <strydah@cybertours.com>
• Re: [femm] boundary conditions
  • From: Dave Squires <djsquires@plix.com>
• Re: [femm] boundary conditions
  • From: "Eckart Nipp" <eckart.nipp@m-v-l.de>
• Re: [femm] boundary conditions
  • From: David Meeker <dmeeker@foster-miller.com>
• Modelling a magnetometer
  • From: ccoughlin@tri-austin.com
• Re: [femm] parametric study
  • From: Mohammad Hasani <mrh_zadeh@yahoo.com>
• boundary conditions
  • From: strydah@cybertours.com
• Re: [femm] Modelling a magnetometer
  • From: "ernestfreeman" <ernestfreeman@email.msn.com>
• Permanent Magnet Models.
  • From: Sebastia Jardi Estadella <sje@tinet.org>
• Re: [femm] Permanent Magnet Models.
  • From: dcm3c@aol.com
• femm 3.0 beta version available
  • From: dcm3c@aol.com
• Permanent Magnet Motor.
  • From: Sebastia Jardi Estadella <sje@tinet.org>
• Re: FEMM 3.0 Beta Tested.
  • From: Sebastia Jardi Estadella <sje@tinet.org>
• Permanent Magnet Models Library.
  • From: Sebastia Jardi Estadella <sje@tinet.org>
• Re: [femm] Permanent Magnet Models Library.
  • From: "dopo podo" <provo51@hotmail.com>
• Re: [femm] Permanent Magnet Models Library.
  • From: "Eckart Nipp" <eckart.nipp@m-v-l.de>
• Possible Programming Error
  • From: "Bruce McGee" <mcgee@mcmillan-mcgee.com>
• Re: [femm] Permanent Magnet Models Library.
  • From: Agnaldo Souza Pereira <agnaldo@if.ufrj.br>
• Re: [femm] Permanent Magnet Models Library.
  • From: Agnaldo Souza Pereira <agnaldo@if.ufrj.br>
• Re: [femm] Permanent Magnet Models Library.
  • From: Sebastia Jardi Estadella <sje@tinet.org>
• Re: [femm] femm 3.0 beta version available
  • From: "r m" <hm3724@hotmail.com>
• Toroids
  • From: Rukmal Jayasinghe <rukmalj@yahoo.com>
• Leakage
  • From: Rukmal Jayasinghe <rukmalj@yahoo.com>
• Re: [femm] femm 3.0 beta version available
  • From: "Eckart Nipp" <eckart.nipp@m-v-l.de>
• Re: [femm] femm 3.0 beta version available
  • From: "Eckart Nipp" <eckart.nipp@m-v-l.de>
• Re: [femm] femm 3.0 beta version available
  • From: dcm3c@aol.com
• beta-version
  • From: Roberto Brambilla <rlbrambilla@cesi.it>
• Re: [femm] femm 3.0 beta version available
  • From: "Eckart Nipp" <eckart.nipp@m-v-l.de>
• Re: various
  • From: dcm3c@aol.com
• GO Material
  • From: fnent@aol.com
• Re: [femm] Re: various
  • From: "Bruce McGee" <mcgee@mcmillan-mcgee.com>
• Re: [femm] Re: various
  • From: "rrezarte krasniqi" <rrezarta_k@hotmail.com>
• motion-induced torque
  • From: phenning@americancooling.com
• Re: [femm] motion-induced torque
  • From: dcm3c@aol.com
• Re: [femm] GO Material
  • From: dcm3c@aol.com
• Re: [femm] GO Material
  • From: fnent@aol.com
• Re: [femm] motion-induced torque
  • From: "Eckart Nipp" <eckart.nipp@m-v-l.de>
• Problem in force calculations
  • From: "Dave Squires" <djsquires@plix.com>
• Re: [femm] Problem in force calculations
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] GO Material
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] Problem in force calculations
  • From: "Eckart Nipp" <eckart.nipp@m-v-l.de>
• Re: [femm] Problem in force calculations
  • From: Dave Squires <djsquires@plix.com>
• Re: [femm] Problem in force calculations
  • From: Dave Squires <djsquires@plix.com>
• Re: [femm] motion-induced torque
  • From: "rrezarte krasniqi" <rrezarta_k@hotmail.com>
• Contactless magnetic torsion transducer.
  • From: "Wouter" <wouter.termote@pandora.be>
• Changing color
  • From: Agnaldo Souza Pereira <agnaldo@if.ufrj.br>
• RE: [femm] Contactless magnetic torsion transducer.
  • From: "James Rabchuk" <ja-rabchuk@wiu.edu>
• Re: [femm] Changing color
  • From: dcm3c@aol.com
• Re: [femm] Contactless magnetic torsion transducer.
  • From: "Wouter" <wouter.termote@pandora.be>
• electric field
  • From: Roberto Brambilla <rlbrambilla@cesi.it>
• minor bug in version 3.0 and other
  • From: Tecnico <tecnico@sincro.it>
• Re: [femm] motion-induced torque
  • From: Agnaldo Souza Pereira <agnaldo@if.ufrj.br>
• Re: various
  • From: dcm3c@aol.com
• Femm calculations on rotating electrical machines
  • From: "dopo podo" <provo51@hotmail.com>
• New member
  • From: fabiodj@supereva.it
• [no subject]
  • From: Juan Luis Villa <jvilla@posta.unizar.es>
• Re: [femm]
  • From: dcm3c@aol.com
• b-h curve creation
  • From: pdsherid@megsinet.net
• Re: [femm] b-h curve creation
  • From: dcm3c@aol.com
• Synchronous machine short circuit simulation.
  • From: "C.Prem Kumar" <prem@rnd.bhel.co.in>
• Linear induction motors
  • From: jrcamacho@ufu.br
• Re: [femm] Linear induction motors
  • From: Dave Squires <djsquires@plix.com>
• RE: [femm] Linear induction motors
  • From: <g.bellussi@ciaoweb.it>
• Re: [femm] Linear induction motors
  • From: "Jose Roberto Camacho" <jrcamacho@ufu.br>
• Re: [femm] Linear induction motors
  • From: dcm3c@aol.com
• Re: [femm] Linear induction motors
  • From: dcm3c@aol.com
• Thermal conductivity
  • From: <g.bellussi@ciaoweb.it>
• Re: [femm] Linear induction motors
  • From: "Jose Roberto Camacho" <jrcamacho@ufu.br>
• Re: [femm] Linear induction motors
  • From: "Eckart Nipp" <eckart.nipp@m-v-l.de>
• RCPT: Re: [femm] Linear induction motors
  • From: <gian@pec.coppe.ufrj.br>
• RCPT: Re: [femm] Linear induction motors
  • From: <gian@pec.coppe.ufrj.br>
• how to copy an object in ABACUS?
  • From: shaangao@hotmail.com
• creating new non-linear BH curves
  • From: "Turbo-Jon " <jon.crawley@turbosound.com>
• file for above message
  • From: Jon Crawley <jon.crawley@turbosound.com>
• Re: [femm] creating new non-linear BH curves
  • From: David Meeker <dmeeker@foster-miller.com>
• creating a line for x-y plot of |B|
  • From: "Turbo-Jon " <jon.crawley@turbosound.com>
• Re: [femm] creating a line for x-y plot of |B|
  • From: dcm3c@aol.com
• Re: [femm] Digest Number 38 -- problem fixed
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] Linear induction motors
  • From: Dave Squires <djsquires@plix.com>
• Dave, David and Linear induction motors
  • From: "Jose Roberto Camacho" <jrcamacho@ufu.br>
• Magnetic Properties of Nickel 200 ??
  • From: peter.ceelen@ct.boc.com
• Re: [femm] Magnetic Properties of Nickel 200 ??
  • From: dcm3c@aol.com
• Re: [femm] Linear induction motors
  • From: dcm3c@aol.com
• new user!
  • From: neelcool_in@yahoo.com
• [femm] new user!
  • From: Rukmal Jayasinghe <rukmalj@yahoo.com>
• *.dxf files
  • From: "Brad Frustaglio" <bmfrusta@yahoo.com>
• *.dxf files
  • From: "Brad Frustaglio" <bmfrusta@yahoo.com>
• Re: [femm] *.dxf files
  • From: Peter Omand Rasmussen <por@iet.auc.dk>
• Re: [femm] *.dxf files
  • From: dcm3c@aol.com
• Re: [femm] new user!
  • From: dcm3c@aol.com
• Meaning of flux lines?
  • From: peter.ceelen@ct.boc.com
• Re: [femm] Meaning of flux lines?
  • From: David Meeker <dmeeker@foster-miller.com>
• Magnetization circumferencely
  • From: wilsons@avonil.net
• Re: [femm] Magnetization circumferentially
  • From: Dave Squires <djsquires@plix.com>
• Re: [femm] Magnetization circumferencely
  • From: "Eckart Nipp" <eckart.nipp@m-v-l.de>
• Re: [femm] Magnetization circumferencely
  • From: "C.Prem Kumar" <prem@rnd.bhel.co.in>
• any body know?
  • From: MZABIDIN@TELKOM.NET
• Re: [femm] Magnetization circumferencely
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] Magnetization circumferencely
  • From: David Meeker <dmeeker@foster-miller.com>
• Area plots of Bt and Bn
  • From: peter.ceelen@ct.boc.com
• [femm] Eddy currents and Back EMF in FEMM
  • From: "Achmad, Mike" <machmad@hrtextron.textron.com>
• Re: [femm] Eddy currents and Back EMF in FEMM
  • From: dcm3c@aol.com
• Force calculation on an axisymmetric model
  • From: Paulo José Gameiro Pereirinha <ppereiri@sun.isec.pt>
• Re: [femm] Force calculation on an axisymmetric model
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] Force calculation on an axisymmetric model
  • From: "Israel Kehaty" <tsiporak@hotmail.com>
• Re: Force calculation on an axisymmetric model
  • From: jim271@hotmail.com
• Can any one post a begineer's guide on FEM plz.
  • From: nazia_shaikh_pk@yahoo.com
• FEMM 3.0
  • From: "Gabriele Bellussi" <g.bellussi@ciaoweb.it>
• Ri:[femm] FEMM 3.0
  • From: "emiliano.menghi@inwind.it"<emiliano.menghi@inwind.it>
• Re: Ri:[femm] FEMM 3.0
  • From: "Gabriele Bellussi" <g.bellussi@ciaoweb.it>
• Re: [femm] Re: Force calculation on an axisymmetric model
  • From: Paulo José Gameiro Pereirinha <ppereiri@sun.isec.pt>
• Re: [femm] Re: Force calculation on an axisymmetric model
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] Re: Force calculation on an axisymmetric model
  • From: Agnaldo Souza Pereira <agnaldo@if.ufrj.br>
• a little bug
  • From: "Gabriele Bellussi" <g.bellussi@ciaoweb.it>
• increasing mesh density
  • From: Tecnico <tecnico@sincro.it>
• Re: [femm] Force calculation on an axisymmetric model
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] Force calculation on an axisymmetric model
  • From: Agnaldo Souza Pereira <agnaldo@if.ufrj.br>
• Re: [femm] Force calculation on an axisymmetric model
  • From: Dave Squires <djsquires@plix.com>
• Re: [femm] Force calculation on an axisymmetric model
  • From: David Meeker <dmeeker@foster-miller.com>
• Asymmetry in FEMM solution...
  • From: "Boris A.Shumm" <bshumm@icp.ac.ru>
• Re: [femm] Asymmetry in FEMM solution...
  • From: dcm3c@aol.com
• Power Factor
  • From: "Bruce McGee" <mcgee@mcmillan-mcgee.com>
• DID ANY BODY WANNA..
  • From: zaenal_a_mohammad@app.co.id
• Re: [femm] Power Factor
  • From: David Meeker <dmeeker@foster-miller.com>
• B-H curve of AISI 1045
  • From: Paulo José Gameiro Pereirinha <ppereiri@sun.isec.pt>
• this is a test
  • From: <g.bellussi@ciaoweb.it>
• Re: [femm] DID ANY BODY WANNA..
  • From: "Srinivas Reddy Umma Reddy" <umareddy@mailcity.com>
• Re: [femm] unsubscribe
  • From: dcm3c@aol.com
• Pensamentos (
  • From: "Sandra" <sancos@uol.com.br>
• Updated femm30 beta
  • From: David Meeker <dmeeker@foster-miller.com>
• hysteresis losses in enclosures
  • From: erik_t_viking@my-deja.com
• Objects in uniform field
  • From: <jmhannon@collins.rockwell.com>
• Femm and magnetic materials
  • From: "Emiliano" <emiliano.menghi@inwind.it>
• Re: [femm] Femm and magnetic materials
  • From: "Emiliano" <emiliano.menghi@inwind.it>
• Re: [femm] hysteresis losses in enclosures
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] Objects in uniform field
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] Updated femm30 beta
  • From: "you se-ho" <sxy28@hotmail.com>
• HELP - B plot in X Y coord. system -
  • From: "ARNOLDO CAMPI" <AC090960@HOTMAIL.COM>
• Re: hysteresis losses in enclosures
  • From: erik_t_viking@my-deja.com
• Invitation to join EnviroTalk - A New Environmental Discussion Forum
  • From: kenbannister@waterdowsers.com
• Re: [femm] Updated femm30 beta
  • From: "Eckart Nipp" <eckart.nipp@m-v-l.de>
• Sorry for sending earlier message to the list
  • From: "Eckart Nipp" <eckart.nipp@m-v-l.de>
• RE: [femm] Updated femm30 beta
  • From: Mathews David CNFB <mathewsd@mcpd.navy.mil>
• Message to list by mistake
  • From: mathewsd@earthlink.net
• Few questions ...
  • From: jrcamacho@ufu.br
• Metglas square loop BH curves
  • From: Dave Squires <djsquires@plix.com>
• Re: [femm] Few questions ...
  • From: dcm3c@aol.com
• LIM
  • From: Juan Luis Villa <jvilla@posta.unizar.es>
• RE: [femm] LIM
  • From: <g.bellussi@ciaoweb.it>
• Re: [femm] LIM
  • From: "Eckart Nipp" <Eckart.Nipp@m-v-l.de>
• Re: [femm] LIM
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] Metglas square loop BH curves
  • From: David Meeker <dmeeker@foster-miller.com>
• leakage flux in the induction motor
  • From: marki denaro <markiid@yahoo.com>
• ring magnet
  • From: ahmet Cansiz <ac319@eng.cam.ac.uk>
• Re: [femm] ring magnet
  • From: dcm3c@aol.com
• Fe2O3 magnetic data
  • From: Victor Bellido-Gonzalez <victor@gencoa.demon.co.uk>
• New web site
  • From: jim271@hotmail.com
• Need help!!
  • From: fazol2000@hotmail.com
• File format using XML?
  • From: "Barry Hansen" <coilgun@oz.net>
• Re: Need help!!
  • From: "David Meeker" <dcm3c@aol.com>
• Fe2O3
  • From: Victor Bellido-Gonzalez <victor@gencoa.demon.co.uk>
• Re: [femm] File format using XML?
  • From: David Meeker <dmeeker@foster-miller.com>
• Example of FEMM with a coilgun
  • From: "Barry Hansen" <coilgun@oz.net>
• Question about force calculation
  • From: "Rob " <rtickle@visi.com>
• Re: [femm] Fe2O3
  • From: "Robin Cornelius" <robin.cornelius@hirst-magnetics.com>
• Re: [femm] File format using XML?
  • From: "Robin Cornelius" <robin.cornelius@hirst-magnetics.com>
• Fe2O3
  • From: Victor Bellido-Gonzalez <victor@gencoa.demon.co.uk>
• Re: [femm] Fe2O3
  • From: "Peter Ceelen" <peter.ceelen@ct.boc.com>
• Calculation of self and mutual inductances
  • From: P.Neumaier@z.zgs.de
• Re: Calculation of self and mutual inductances
  • From: "Rob " <rtickle@visi.com>
• Inductance and mutul inductance caculation
  • From: stsc_sh@sina.com
• 回复: [femm] Re: Calculation of self and mutual inductances
  • From: "si hang" <stsc_sh@sina.com>
• Re: Calculation of self and mutual inductances
  • From: "Rob " <rtickle@visi.com>
• Fw: RECOMEÇAR...! segundo Drummond
  • From: "Priscila Galvao" <priscilagalvao@openlink.com.br>
• bug report
  • From: dcm3c@aol.com
• Incorrect force direction
  • From: "Greg Watson" <gowatson@optusnet.com.au>
• Re: Incorrect force direction
  • From: "Rob " <rtickle@visi.com>
• Re: Incorrect force direction
  • From: "Rob " <rtickle@visi.com>
• Re: [femm] Re: Incorrect force direction
  • From: "Greg Watson" <gowatson@optusnet.com.au>
• Re: Incorrect force direction
  • From: "Greg Watson" <gowatson@optusnet.com.au>
• Re: [femm] Re: Incorrect force direction
  • From: dcm3c@aol.com
• Re: [femm] Re: Incorrect force direction
  • From: "Greg Watson" <gowatson@optusnet.com.au>
• Re: [femm] Re: Incorrect force direction
  • From: "Greg Watson" <gowatson@optusnet.com.au>
• Re: [femm] Re: Incorrect force direction
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] Re: Incorrect force direction
  • From: "Greg Watson" <gowatson@optusnet.com.au>
• Re: [femm] Re: Incorrect force direction
  • From: "Steven Stretz" <stretzsj@execpc.com>
• Re: Incorrect force direction
  • From: "Rob Tickle" <tickle@aem.umn.edu>
• Re: [femm] Re: Incorrect force direction
  • From: "Greg Watson" <gowatson@asiaonline.net.au>
• Re: Incorrect force direction
  • From: "Rob " <rtickle@visi.com>
• Re: [femm] Re: Incorrect force direction
  • From: Dave Squires <djsquires@plix.com>
• Re: [femm] Re: Incorrect force direction
  • From: "Greg Watson" <gowatson@asiaonline.net.au>
• Re: FE magnetics commercial ware
  • From: "C.Prem Kumar" <prem@rnd.bhel.co.in>
• Re: [femm] Re: FE magnetics commercial ware
  • From: "Steven Stretz" <stretzsj@execpc.com>
• Re: [femm] Re: Incorrect force direction
  • From: "Steven Stretz" <stretzsj@execpc.com>
• Re: [femm] Re: Incorrect force direction
  • From: "Steven Stretz" <stretzsj@execpc.com>
• Re: [femm] Re: FE magnetics commercial ware
  • From: Dave Squires <djsquires@plix.com>
• Re: [femm] Re: Incorrect force direction
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] FE magnetics commercial ware
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] FE magnetics commercial ware
  • From: "Steven Stretz" <stretzsj@execpc.com>
• Re: [femm] Re: FE magnetics commercial ware
  • From: "Robin Cornelius" <robin.cornelius@hirst-magnetics.com>
• Calculating skin effect using FEMM?
  • From: "Dalibor Gorenc" <dgorenc@koncar-institut.hr>
• Re: [femm] Calculating skin effect using FEMM?
  • From: dcm3c@aol.com
• Re: [femm] Calculation of self and mutual inductances
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: Calculation of self and mutual inductances
  • From: jim271@hotmail.com
• Infolytica E-M Specialists
  • From: "Paul Alfonso" <paul@infolytica.com>
• Re: [femm] Infolytica E-M Specialists
  • From: abc compo <a_first_2000@yahoo.com>
• Re: Calculating skin effect using FEMM?
  • From: k.gregory@lboro.ac.uk
• Re: [femm] Re: Calculating skin effect using FEMM?
  • From: David Meeker <dmeeker@foster-miller.com>
• Modelling a three phase short circuit of a Synchronous machine.
  • From: "C.Prem Kumar" <prem@rnd.bhel.co.in>
• Calculating Shieldi Effectiveness with Femm
  • From: emiliano.menghi@inwind.it
• Re: [femm] Calculating Shieldi Effectiveness with Femm
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] Modelling a three phase short circuit of a Synchronous machine.
  • From: David Meeker <dmeeker@foster-miller.com>
• Re[2]: [femm] Calculating Shieldi Effectiveness with Femm
  • From: V.Petoukhov <stray_current@mtu-net.ru>
• leakage flux detection
  • From: marki denaro <markiid@yahoo.com>
• Re: [femm] Calculating Shieldi Effectiveness with Femm
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] leakage flux detection
  • From: David Meeker <dmeeker@foster-miller.com>
• IEMDC 2001
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] IEMDC 2001
  • From: "Steven Stretz" <stretzsj@execpc.com>
• Re: [femm] IEMDC 2001
  • From: "James Peng" <james_p_peng@hotmail.com>
• Update to Computational Magnetics links
  • From: dcm3c@aol.com
• Scaling question
  • From: rtickle@visi.com
• Re: [femm] Scaling question
  • From: Renuka Rajput <renuka@cat.ernet.in>
• Re: [femm] Scaling question
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] Scaling question
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: Scaling question
  • From: rtickle@visi.com
• Re: Scaling question
  • From: rtickle@visi.com
• Solenoid design
  • From: gm123456@yahoo.com
• [no subject]
  • From: marki denaro <markiid@yahoo.com>
• New beta version
  • From: dcm3c@aol.com
• Re: [femm] New beta version
  • From: Dave Squires <djsquires@plix.com>
• Re: [femm] New beta version
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: [femm] New beta version
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] New beta version
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: [femm] *.ans file format
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] New beta version
  • From: dcm3c@aol.com
• Re: [femm] New beta version
  • From: Dave Squires <djsquires@plix.com>
• Re: [femm] New beta version
  • From: "Peter Ceelen" <peter.ceelen@ct.boc.com>
• femmplot
  • From: Tecnico <tecnico@sincro.it>
• Question in Axisym. Problems in Postprocessor
  • From: stsc_sh@sina.com
• Re: [femm] Question in Axisym. Problems in Postprocessor
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] femmplot
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] Question in Axisym. Problems in Postprocessor
  • From: "sihang" <stsc_sh@sina.com>
• Re: [femm] Question in Axisym. Problems in Postprocessor
  • From: dcm3c@aol.com
• B-H data
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: Axi Question and Fast Point Location
  • From: "sihang" <stsc_sh@sina.com>
• Re: [femm] Re: Axi Question and Fast Point Location
  • From: dcm3c@aol.com
• Re: [femm] Re: Fast Point Location
  • From: "sihang" <stsc_sh@sina.com>
• lan transformers
  • From: Rukmal Jayasinghe <rukmalj@yahoo.com>
• Re: [femm] lan transformers
  • From: max <max@infolytica.com>
• Re: [femm] lan transformers
  • From: Dave Squires <djsquires@plix.com>
• Electric circuits vs. material current density
  • From: Fernando Seco <fseco@iai.csic.es>
• Re: [femm] Electric circuits vs. material current density
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] lan transformers
  • From: Rukmal Jayasinghe <rukmalj@yahoo.com>
• Re: [femm] Electric circuits vs. material current density
  • From: Fernando Seco <fseco@iai.csic.es>
• "Small skin depth" Impedance Boundary Condition
  • From: Fernando Seco <fseco@iai.csic.es>
• Re: Solenoid design
  • From: "Adrian" <adrianw@solid-state-logic.com>
• Coil calculation spreadsheet
  • From: "Adrian" <adrianw@solid-state-logic.com>
• Linear Induction Motors
  • From: "Adrian" <adrianw@solid-state-logic.com>
• Re: [femm] Linear Induction Motors
  • From: "Israel Kehaty" <tsiporak@hotmail.com>
• eddy-curr in a tube
  • From: Roberto Brambilla <rlbrambilla@cesi.it>
• RE: [femm] Coil calculation spreadsheet
  • From: "Achmad, Mike" <machmad@hrtextron.textron.com>
• RE: [femm] eddy-curr in a tube
  • From: "McGee" <mcgee@mcmillan-mcgee.com>
• Re: [femm] "Small skin depth" Impedance Boundary Condition
  • From: David Meeker <dmeeker@foster-miller.com>
• RE: [femm] Coil calculation spreadsheet
  • From: "Adrian" <adrianw@solid-state-logic.com>
• Re: [femm] Linear Induction Motors
  • From: "Adrian" <adrianw@solid-state-logic.com>
• Re: [femm] Linear Induction Motors
  • From: dcm3c@aol.com
• Re: [femm] Re: Solenoid design
  • From: "Gert Mensing" <gmensing@defond.com>
• Re: [femm] eddy-curr in a tube
  • From: dcm3c@aol.com
• Re: Linear Induction Motors
  • From: jrt@rosedail.idps.co.uk
• Re: [femm] Re: Linear Induction Motors
  • From: "Graham Gunderson" <infinitenergy@hotmail.com>
• a bit on current amplifiers
  • From: "Graham Gunderson" <infinitenergy@hotmail.com>
• RE: [femm] eddy-curr in a tube
  • From: "McGee" <mcgee@mcmillan-mcgee.com>
• High frequency testing
  • From: Rukmal Jayasinghe <rukmalj@yahoo.com>
• eddy curr in a finite tube
  • From: Roberto Brambilla <rlbrambilla@cesi.it>
• Re: [femm] eddy-curr in a tube
  • From: David Meeker <dmeeker@foster-miller.com>
• RE: [femm] Hysteresis
  • From: "McGee" <mcgee@mcmillan-mcgee.com>
• Re: [femm] Hysteresis
  • From: "sihang" <stsc_sh@sina.com>
• Re: [femm] eddy curr in a finite tube
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] Hysteresis
  • From: David Meeker <dmeeker@foster-miller.com>
• transformer leakage inductance
  • From: erdal903@yahoo.com
• Re: [femm] transformer leakage inductance
  • From: max <max@infolytica.com>
• Coil winding calculations
  • From: "Wlliam F. Everett" <WFEverett@Tri-TechLLC.com>
• Re: [[femm] Coil winding calculations]
  • From: Amein M.Hassan <amein.hassan@usa.net>
• RE: [[femm] Coil winding calculations]
  • From: "Wlliam F. Everett" <WFEverett@Tri-TechLLC.com>
• RE: [femm] Coil winding calculations
  • From: "Achmad, Mike" <machmad@hrtextron.textron.com>
• Total current in a high energy disharge.
  • From: fucian@aol.com
• Re: [femm] Total current in a high energy disharge.
  • From: "Graham Gunderson" <infinitenergy@hotmail.com>
• Re: [femm] Total current in a high energy disharge.
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] Total current in a high energy disharge.
  • From: Dave Squires <djsquires@plix.com>
• Re: [femm] Total current in a high energy disharge.
  • From: fucian@aol.com
• Re: [femm] Total current in a high energy disharge.
  • From: Dave Squires <djsquires@plix.com>
• Re: [femm] Total current in a high energy disharge.
  • From: fucian@aol.com
• Re: Total current in a high energy disharge.
  • From: jim271@hotmail.com
• [Resistance and Inductance as a function of frequnecy]
  • From: "you se-ho" <sxy28@hotmail.com>
• Re: [femm] [Resistance and Inductance as a function of frequnecy]
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] Total current in a high energy disharge.
  • From: Dave Squires <djsquires@plix.com>
• Re: [femm] [Resistance and Inductance as a function of frequnecy]
  • From: "sihang" <stsc_sh@sina.com>
• Re: [femm] [Resistance and Inductance as a function of frequnecy]
  • From: "you se-ho" <sxy28@hotmail.com>
• more anecdotal capacitor safety!
  • From: "Graham Gunderson" <infinitenergy@hotmail.com>
• Re: [femm] more anecdotal capacitor safety!
  • From: "Robin Cornelius2" <robin.cornelius@btinternet.com>
• FEMM "batch processing"
  • From: frank.e.lenning@boeing.com
• Shieldinhg effectiveness
  • From: emiliano.menghi@inwind.it
• Re: [femm] FEMM "batch processing"
  • From: "Graham Gunderson" <infinitenergy@hotmail.com>
• Re: [femm] FEMM "batch processing"
  • From: Dave Squires <djsquires@plix.com>
• About .fem file and meaning of its elements
  • From: "¼­Áø±Ô" <seojq@hanmail.net>
• Re: FEMM "batch processing"
  • From: jim271@hotmail.com
• Re: FEMM "batch processing"
  • From: jim271@hotmail.com
• Re: [femm] About .fem file and meaning of its elements
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] Shielding effectiveness
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] Shielding effectiveness
  • From: "Emiliano" <emiliano.menghi@inwind.it>
• Re: [femm] FEMM "batch processing"
  • From: dcm3c@aol.com
• Re: [femm] Shielding effectiveness
  • From: dcm3c@aol.com
• what can femm do??
  • From: "J. Ruben Gonzalez-Baird" <rjk2@dana.ucc.nau.edu>
• Batch processing / interfacing
  • From: Peter Omand Rasmussen <por@iet.auc.dk>
• Re: [femm] Batch processing / interfacing
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: [femm] Shielding effectiveness
  • From: "Emiliano" <emiliano.menghi@inwind.it>
• Re: [femm] Shielding effectiveness
  • From: "Emiliano" <emiliano.menghi@inwind.it>
• Re: [femm] FEMM "batch processing"
  • From: Petr Krc <pekr@magneton.cz>
• Re: [femm] FEMM "batch processing"
  • From: "sihang" <stsc_sh@sina.com>
• Re: [femm] FEMM "batch processing"
  • From: "Graham Gunderson" <g_jlnlabs@hotmail.com>
• Free answers
  • From: "Graham Gunderson" <g_jlnlabs@hotmail.com>
• Re: [femm] Shielding effectiveness
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] Batch processing / interfacing
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] Free answers
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: Batch processing / interfacing
  • From: frank.e.lenning@boeing.com
• Re: [femm] Free answers
  • From: "Graham Gunderson" <g_jlnlabs@hotmail.com>
• RE: [femm] Batch processing / interfacing
  • From: "Adrian" <adrianw@solid-state-logic.com>
• Re: [femm] Batch processing / interfacing
  • From: Peter Omand Rasmussen <por@iet.auc.dk>
• Re: [femm] Free answers
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: [femm] Batch processing / interfacing
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: [femm] Batch processing / interfacing
  • From: fnent@aol.com
• Re: Batch processing / interfacing
  • From: frank.e.lenning@boeing.com
• Re: [[femm] Re: Batch processing / interfacing]
  • From: <vecerkaj@usa.net>
• Re: [femm] Re: Batch processing / interfacing
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] Batch processing / interfacing
  • From: David Meeker <dmeeker@foster-miller.com>
• How to unsubscribe
  • From: David Meeker <dmeeker@foster-miller.com>
• Solenoid Design Handbook - A Moron's Guide, Please Help
  • From: "Jay D. Greener" <jdgreener@earthlink.net>
• New file uploaded to femm
  • From: <femm@yahoogroups.com>
• Re: [femm] Solenoid Design Handbook - A Moron's Guide, Please Help
  • From: max <max@infolytica.com>
• RE: [femm] Re: Batch processing / interfacing
  • From: "Adrian" <adrianw@solid-state-logic.com>
• Re: [femm] Re: Batch processing / interfacing
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] Re: Batch processing / interfacing
  • From: Dave Squires <djsquires@plix.com>
• Continuing the didcussion on Parametric Analysis / interfacing
  • From: "C.Prem Kumar" <prem@rnd.bhel.co.in>
• Re: [femm] Solenoid Design Handbook - A Moron's Guide, Please Help
  • From: "Israel Kehaty" <tsiporak@hotmail.com>
• Current transformer ...
  • From: jrcamacho@ufu.br
• help: split-phase motors
  • From: Ramon Bargallo <Ramon.Bargallo@upc.es>
• RE: [femm] Re: Batch processing / interfacing
  • From: "Adrian" <adrianw@solid-state-logic.com>
• Solenoid Model
  • From: "Jay D. Greener" <jdgreener@earthlink.net>
• RE: [femm] help: split-phase motors
  • From: "Jay D. Greener" <jdgreener@earthlink.net>
• Superconductor model
  • From: "Vencislav" <vencib@yahoo.com>
• Re: [femm] Current transformer ...
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] Superconductor model
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] Superconductor model
  • From: Peter Schönhuber <Peter.Schoenhuber@tuwien.ac.at>
• Re: [femm] Solenoid Model
  • From: "sihang" <stsc_sh@sina.com>
• Iron losses in PM synchronous machine
  • From: <vecerkaj@usa.net>
• Re: [femm] Superconductor model
  • From: Agnaldo Souza Pereira <agnaldo@if.ufrj.br>
• DXF Import Tricks & Tips (and questions) from a FEMM Newbie
  • From: "Jay D. Greener" <jdgreener@earthlink.net>
• Re: [femm] DXF Import Tricks & Tips (and questions) from a FEMM Newbie
  • From: David Meeker <dmeeker@foster-miller.com>
• RE: [femm] DXF Import Tricks & Tips (and questions) from a FEMM Newbie
  • From: "Jay D. Greener" <jdgreener@earthlink.net>
• RE: [femm] Solenoid Model
  • From: "Achmad, Mike" <machmad@hrtextron.textron.com>
• Re: [femm] Solenoid Model
  • From: David Meeker <dmeeker@foster-miller.com>
• 12L14 Case Hardened BH Curve?
  • From: "Jay D. Greener" <jdgreener@earthlink.net>
• Re: [femm] Solenoid Model
  • From: "sihang" <stsc_sh@sina.com>
• Convergence problem with pure iron?
  • From: uwenh@gmx.de
• B.n(avg) vs. B.n^2(avg)
  • From: "Jay D. Greener" <jdgreener@earthlink.net>
• Re: [femm] Convergence problem with pure iron?
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] B.n(avg) vs. B.n^2(avg)
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] Convergence problem with pure iron?
  • From: Dave Squires <djsquires@plix.com>
• Re: Convergence problem with pure iron?
  • From: uwenh@gmx.de
• Re: Convergence problem with pure iron?
  • From: uwenh@gmx.de
• high performance computing options for FEM
  • From: Greg Quinting <gregq@iei.net>
• Re: [femm] high performance computing options for FEM
  • From: Dave Squires <djsquires@plix.com>
• Re: [femm] high performance computing options for FEM
  • From: bradstarcevich@netscape.net
• Re: [femm] high performance computing options for FEM
  • From: Gregory Quinting <gregq@iei.net>
• Re: [femm] high performance computing options for FEM
  • From: "Klevets" <klevets@home.cris.net>
• Re: [femm] high performance computing options for FEM
  • From: max <max@infolytica.com>
• RE: [femm] high performance computing options for FEM
  • From: "Dragos Popa" <dragospopa@pcnet.ro>
• Re: [femm] Iron losses in PM synchronous machine
  • From: David Meeker <dmeeker@foster-miller.com>
• Plot field values along a user-specified line or...?
  • From: "Johnson" <femmuser@yahoo.com>
• Amorphous steel
  • From: Rukmal Jayasinghe <rukmalj@yahoo.com>
• Re: [femm] Amorphous steel
  • From: David Meeker <dmeeker@foster-miller.com>
• Coile Winder
  • From: "Jay D. Greener" <jdgreener@earthlink.net>
• What's New -- Computation Magnetics links
  • From: David Meeker <dmeeker@foster-miller.com>
• what frequency range can FEMM be used in?
  • From: corneliuspaul@gmx.de
• Re: [femm] what frequency range can FEMM be used in?
  • From: David Meeker <dmeeker@foster-miller.com>
• frequency range
  • From: corneliuspaul@gmx.de
• More Batch processing/ Interfaceing
  • From: "Robin Cornelius" <robin.cornelius@hirst-magnetics.com>
• Re: [femm] More Batch processing/ Interfaceing
  • From: Dave Squires <djsquires@plix.com>
• electrostatics and FEMM
  • From: frank.e.lenning@boeing.com
• Re: [femm] More Batch processing/ Interfaceing
  • From: dcm3c@aol.com
• Re: [femm] More Batch processing/ Interfaceing
  • From: "C.Prem Kumar" <prem@rnd.bhel.co.in>
• Re: [femm] More Batch processing/ Interfaceing
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: [femm] More Batch processing/ Interfaceing
  • From: "Robin Cornelius" <robin.cornelius@hirst-magnetics.com>
• Re: [femm] electrostatics and FEMM
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: electrostatics and FEMM
  • From: frank.e.lenning@boeing.com
• Femme-lua (batch processing)
  • From: "Robin Cornelius" <robin.cornelius@hirst-magnetics.com>
• solvers and tasks
  • From: "Chirkov U.O." <chirkov@ipp.adam.kiev.ua>
• Re: [femm] Femme-lua (batch processing)
  • From: David Meeker <dmeeker@foster-miller.com>
• Force calculations on magnetostatic problems...
  • From: harti@harti.com
• Re:[femm] Femme-lua (batch processing)
  • From: "Robin Cornelius" <robin.cornelius@hirst-magnetics.com>
• PMSquare FEMM pics
  • From: "hartiberlin@pop3.freenet.de" <hartiberlin@pop3.freenet.de>
• PMSquare FEMM pics and questions...typo
  • From: "hartiberlin@pop3.freenet.de" <harti@harti.com>
• FEMM
  • From: "H.G." <garciah@flash.net>
• electromagnets
  • From: brvusit@yahoo.it
• Re: electromagnets
  • From: harti@harti.com
• RE: [femm] electromagnets
  • From: "Adrian" <adrianw@solid-state-logic.com>
• Re: [femm] electromagnets
  • From: Dave Squires <djsquires@plix.com>
• Re: FEMM
  • From: brvusit@yahoo.it
• Re: PMSquare simulations...
  • From: harti@harti.com
• electromagnets
  • From: brvusit@yahoo.it
• Re: PMSquare FEMM simulations errors ??
  • From: "hartiberlin@pop3.freenet.de" <harti@harti.com>
• Re: FEMM simulations errors ??
  • From: harti@harti.com
• Re: FEMM simulations errors ??
  • From: "David Meeker" <dcm3c@aol.com>
• RE: [femm] Re: FEMM simulations errors ??
  • From: "Adrian" <adrianw@solid-state-logic.com>
• Re: PMSquare FEMM simulations errors ??
  • From: <dcm3c@aol.com>
• Re: PMSquare FEMM simulation errors ??
  • From: harti@harti.com
• Re: [femm] Re: FEMM simulations errors ??
  • From: Dave Squires <djsquires@plix.com>
• Re: [femm] Re: FEMM simulations errors ??
  • From: Dave Squires <djsquires@plix.com>
• PMsquare thing.
  • From: "Graham Gunderson" <g_jlnlabs@hotmail.com>
• Re: [femm] Re: PMSquare FEMM simulations errors ??
  • From: Dave Squires <djsquires@plix.com>
• Re: [femm] Re: FEMM simulations errors ??
  • From: David Meeker <dmeeker@foster-miller.com>
• PMsquare dead end...
  • From: harti@harti.com
• RE: [femm] Re: FEMM simulations errors ??
  • From: Mario Acuna <u2mha@erols.com>
• Re: [femm] PMsquare dead end...
  • From: Dave Squires <djsquires@plix.com>
• line integral and antiperiodic BC
  • From: <vecerkaj@usa.net>
• Re: line integral and antiperiodic BC
  • From: "David Meeker" <dcm3c@aol.com>
• Re: [femm] line integral and antiperiodic BC
  • From: razaq hadi <razaq97@yahoo.com>
• Wishlist for future FEMM versions
  • From: harti@harti.com
• Femme-lua (batch processing)
  • From: "KEN" <p.jinupun@herts.ac.uk>
• femm] Femme-lua (batch processing)
  • From: "Robin Cornelius" <robin.cornelius@hirst-magnetics.com>
• how to use lua-batch
  • From: Roberto Brambilla <rlbrambilla@cesi.it>
• Re: line integral and antiperiodic BC
  • From: vecerkaj@usa.net
• Re: [femm] how to use lua-batch
  • From: "Robin Cornelius" <robin.cornelius@hirst-magnetics.com>
• femm-lua new upload
  • From: "Robin Cornelius" <robin.cornelius@hirst-magnetics.com>
• Suggestions
  • From: "Graham Gunderson" <g_jlnlabs@hotmail.com>
• Re: how to use lua-batch
  • From: harti@harti.com
• Re:[femm] Suggestions
  • From: "C.Prem Kumar" <prem@rnd.bhel.co.in>
• Re: [femm] Suggestions
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• RE: [femm] Suggestions
  • From: "Adrian" <adrianw@solid-state-logic.com>
• Re: Suggestions
  • From: harti@harti.com
• Re: [femm] Suggestions
  • From: dcm3c@aol.com
• FEMM-LUA Report and Opinion on Present-Future Development
  • From: "KEN" <p.jinupun@herts.ac.uk>
• Re: Suggestions
  • From: dcm3c@aol.com
• Re: [femm] Suggestions
  • From: Victor Javier Raposo Funcia <victor@gugu.usal.es>
• [femm] PM modeling (Re:Suggestions)
  • From: David Meeker <dmeeker@foster-miller.com>
• Superconductors
  • From: Agnaldo Souza Pereira <agnaldo@if.ufrj.br>
• Re: [femm] PM modeling (Re:Suggestions)
  • From: "Ivan Reede" <i_reede@amerisys.com>
• FYI: FEMM runs well on GNU/Linux using wine
  • From: "Stefan Engstrom" <stefan.engstrom@mcmail.vanderbilt.edu>
• Re: [femm] FYI: FEMM runs well on GNU/Linux using wine
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: [femm] PM modeling (Re:Suggestions)
  • From: Victor Javier Raposo Funcia <victor@gugu.usal.es>
• [no subject]
  • From: corneliuspaul@gmx.de
• networking and consultancy
  • From: Zareh Soghomonian <zareh.soghomonian@wavecrestlabs.com>
• Re: [femm]
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: FYI: FEMM runs well on GNU/Linux using wine
  • From: "Stefan Engstrom" <stefan.engstrom@mcmail.vanderbilt.edu>
• FAQ - FEMM under GNU/Linux using Wine
  • From: "Stefan Engstrom" <stefan.engstrom@mcmail.vanderbilt.edu>
• RE: [femm]
  • From: Néstor Martínez <nestorm@arnet.com.ar>
• Re: FAQ - FEMM under GNU/Linux using Wine
  • From: "David Meeker" <dcm3c@aol.com>
• Re: [femm] Re: FAQ - FEMM under GNU/Linux using Wine
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• RE: [femm]
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: literature hints for FEM users...anyone else?
  • From: corneliuspaul@gmx.de
• RE: [femm]
  • From: "Ramon Bargallo" <Ramon.Bargallo@upc.es>
• Re: [femm] Superconductors
  • From: "Paulo Pereirinha" <ppereiri@isr.uc.pt>
• The Science & Engineering Journal
  • From: "Jose Roberto Camacho" <jrcamacho@ufu.br>
• Femm and Helmotz equation
  • From: emiliano.menghi@inwind.it
• Re: [femm] Femm and Helmotz equation
  • From: David Meeker <dmeeker@foster-miller.com>
• self inductance calculation.. need advice
  • From: corneliuspaul@gmx.de
• Re: [femm] self inductance calculation.. need advice
  • From: dcm3c@aol.com
• Reconfiguring Femm to Individual Requirements: How?
  • From: Douglas@magtech.co.uk
• Re: [femm] Reconfiguring Femm to Individual Requirements: How?
  • From: David Meeker <dmeeker@foster-miller.com>
• leakage transformer
  • From: Rukmal Jayasinghe <rukmalj@yahoo.com>
• Re: leakage transformer
  • From: corneliuspaul@gmx.de
• Re: [femm] Re: leakage transformer
  • From: Rukmal Jayasinghe <rukmalj@yahoo.com>
• inductance/flux calculations in 2D/3D
  • From: corneliuspaul@gmx.de
• Re: [femm] inductance/flux calculations in 2D/3D
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] inductance/flux calculations in 2D/3D
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• [Crosstalk mode?]
  • From: "you se-ho" <sxy28@hotmail.com>
• Re: inductance/flux calculations in 2D/3D
  • From: corneliuspaul@gmx.de
• Re: [femm] Re: inductance/flux calculations in 2D/3D
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• inductance calculations in nonlinear material
  • From: corneliuspaul@gmx.de
• Re: [femm] inductance calculations in nonlinear material
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: Crosstalk mode? / --> transformer calculation summary
  • From: corneliuspaul@gmx.de
• Re: [femm] Re: Crosstalk mode? / --> transformer calculation summary
  • From: Edwin Spencer <edwin.spencer@mscsoftware.com>
• RE: [femm] Re: Crosstalk mode? / --> transformer calculation summary
  • From: "Jeff Tola" <jtola@afetech.com>
• Re: Crosstalk mode? / --> transformer calculation summary
  • From: "David Meeker" <dcm3c@aol.com>
• Re: [femm] Re: Crosstalk mode? / --> transformer calculation summary
  • From: "nasrul" <nasrul@suria.fke.utm.my>
• please alguien me oriente en ESPAÑOL
  • From: JORGE LUIS <jorgemirez2000@yahoo.com>
• RE: [femm] please alguien me oriente en ESPAÑOL
  • From: "H.G." <garciah@flash.net>
• Re: [femm] The Science & Engineering Journal
  • From: JORGE LUIS <jorgemirez2000@yahoo.com>
• RE: [femm] please alguien me oriente en ESPAÑOL
  • From: "Alfredo de Blas (UPC/EUETIB)" <alfredo.de.blas@upc.es>
• RE: [femm] please alguien me oriente en ESPAÑOL
  • From: "Alexander Millán" <alejo_millanr@hotmail.com>
• RE:_[femm]_please_alguien_me_oriente_en_ESPAÑOL
  • From: <jorgemirez2000@yahoo.com>
• RE: [femm] please alguien me oriente en ESPAÑOL
  • From: <jorgemirez2000@yahoo.com>
• Gracias Alexander / Thank's Alexander
  • From: "Alfredo de Blas (UPC/EUETIB)" <alfredo.de.blas@upc.es>
• What is the FEMM group objective
  • From: "KEN" <p.jinupun@herts.ac.uk>
• Re: [femm] What is the FEMM group objective
  • From: "Patrick Luk" <pluk@ieee.org>
• RE: [femm] What is the FEMM group objective
  • From: "H.G." <garciah@flash.net>
• Re: [femm] What is the FEMM group objective
  • From: "Alfredo de Blas" <deblas@teleline.es>
• Re: What is the FEMM group objective
  • From: "David Meeker" <dcm3c@aol.com>
• [Faraday's law ?]
  • From: "you se-ho" <sxy28@hotmail.com>
• Re: [Faraday's law ?]
  • From: "David Meeker" <dcm3c@aol.com>
• Re: [femm] [Faraday's law ?]
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: [Faraday's law ?]
  • From: "you se-ho" <sxy28@hotmail.com>
• Re: [femm] [Faraday's law ?]
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] [Faraday's law ?]
  • From: "nasrul" <nasrul@suria.fke.utm.my>
• Re: [femm] networking and consultancy
  • From: Goga Cvetkovski <gogacvet@yahoo.co.uk>
• Re: [femm] [Faraday's law ?]
  • From: David Meeker <dmeeker@foster-miller.com>
• Pubblications
  • From: bruno vusini <brvusit@yahoo.it>
• Re: [femm] Pubblications
  • From: "C.Prem Kumar" <prem@bhelrnd.co.in>
• about AQUASEA and AQUADYN hydraulic programmes
  • From: davutkoca@yahoo.com
• RE: [femm] networking and consultancy
  • From: "Dragos Popa" <dragospopa@pcnet.ro>
• "rough draft" of updated version
  • From: "David Meeker" <dcm3c@aol.com>
• Latest FEMM
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: [femm] Latest FEMM
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Bx,By on rectangular grid - Help!! -
  • From: arnoldo campi <ac090960@yahoo.it>
• [A few questions]
  • From: "you se-ho" <sxy28@hotmail.com>
• RE: [femm] Latest FEMM (the LUA bits)
  • From: "Robin Cornelius" <robin.cornelius@hirst-magnetics.com>
• RE: [femm] Latest FEMM (the LUA bits)
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: [femm] Bx,By on rectangular grid - Help!! -
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: [femm] [A few questions]
  • From: dcm3c@aol.com
• Re: [femm] Latest FEMM (the LUA bits)
  • From: dcm3c@aol.com
• addcontour in LUA
  • From: vecerkaj@yahoo.com
• HELP!
  • From: Agnaldo Souza Pereira <agnaldo@if.ufrj.br>
• Re: B-H data
  • From: "Kurt Steinke" <kurt.steinke@optiva.com>
• LUA scripting, fantastic !!
  • From: jim271@hotmail.com
• addcontour, bitmaps and other LUA bits
  • From: robin.cornelius@hirst-magnetics.com
• Re: [femm] addcontour, bitmaps and other LUA bits
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• RE: [femm] addcontour, bitmaps and other LUA bits
  • From: "Robin Cornelius" <robin.cornelius@hirst-magnetics.com>
• RE: [femm] addcontour, bitmaps and other LUA bits
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: [femm] Re: B-H data
  • From: Greg Quinting <gregq@iei.net>
• Re: [femm] addcontour, bitmaps and other LUA bits
  • From: "nasrul" <nasrul@suria.fke.utm.my>
• Re: [femm] Re: B-H data
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• RE: [femm] addcontour, bitmaps and other LUA bits
  • From: "Robin Cornelius" <robin.cornelius@hirst-magnetics.com>
• Re: [femm] LUA scripting, fantastic !!
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] [A few questions]
  • From: "you se-ho" <sxy28@hotmail.com>
• Permanent Magnet Modeling
  • From: afetech@yahoo.com
• Re: [femm] [A few questions]
  • From: David Meeker <dmeeker@foster-miller.com>
• Magnetics Experts needed in Houston, Texas
  • From: kkannady@des-engineering.com
• Three phase induction motors
  • From: Alberto Perez <albertoperarnau@yahoo.es>
• Re: Three phase induction motors
  • From: "David Meeker" <dcm3c@aol.com>
• student of fem group need help
  • From: siva prasad <sivaprasad79@yahoo.co.in>
• Using LUA to create a Bx table
  • From: peter.ceelen@ct.boc.com
• Re: [femm] Using LUA to create a Bx table
  • From: David Meeker <dmeeker@foster-miller.com>
• features
  • From: "Carl Kopin" <ckopin@davinciresearch.com>
• Re: [femm] features
  • From: jrcamacho@ufu.br
• Re: [femm] features
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: features
  • From: robin.cornelius@hirst-magnetics.com
• mutual induction calculation?
  • From: nsrhm@yahoo.com
• Re: Bx,By on rectangular grid - Help!! -
  • From: ac090960@yahoo.it
• Re: [femm] mutual induction calculation?
  • From: "you se-ho" <sxy28@hotmail.com>
• Re: [femm] student of fem group need help
  • From: "you se-ho" <sxy28@hotmail.com>
• Colors
  • From: "Alexander Eigner" <a.eigner@gmx.de>
• Re: Colors
  • From: "David Meeker" <dcm3c@aol.com>
• Re: [femm] features
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Model for coercive force of magnet
  • From: <Dcm3c@aol.com>
• Application Engineer / Electromagnetics
  • From: roswellfan1980@yahoo.com
• RE: [femm] features
  • From: "Robin Cornelius" <robin.cornelius@hirst-magnetics.com>
• RE: [femm] features
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: Permanent Magnet Modeling
  • From: dcm3c@aol.com
• RE: [femm] Re: Permanent Magnet Modeling
  • From: "Jeff Tola" <jtola@afetech.com>
• What is the best way to model Horseshoe magnets
  • From: "Peter Ceelen" <peter.ceelen@ct.boc.com>
• Re: [femm] Using LUA to create a Bx table
  • From: "Peter Ceelen" <peter.ceelen@ct.boc.com>
• some bugs?
  • From: "Carl Kopin" <ckopin@davinciresearch.com>
• Re: What is the best way to model Horseshoe magnets
  • From: "David Meeker" <dcm3c@aol.com>
• RE: [femm] some bugs?
  • From: "Robin Cornelius" <robin.cornelius@hirst-magnetics.com>
• Lua sample of line integral
  • From: "Israel Kehaty" <tsiporak@hotmail.com>
• Re: Lua sample of line integral
  • From: jim271@hotmail.com
• Re: [femm] Re: What is the best way to model Horseshoe magnets
  • From: "Peter Ceelen" <peter.ceelen@ct.boc.com>
• Re: [femm] Re: Lua sample of line integral
  • From: dcm3c@aol.com
• Re: Lua sample of line integral
  • From: jim271@hotmail.com
• Re: [femm] Re: Lua sample of line integral
  • From: dcm3c@aol.com
• RE: [femm] Femme-lua (batch processing)
  • From: "Dragos Popa" <dragospopa@pcnet.ro>
• RE: [femm] some bugs?
  • From: Carl Kopin <carlkopin@yahoo.com>
• Re: [femm] Re: Lua sample of line integral
  • From: "Israel Kehaty" <tsiporak@hotmail.com>
• i need help , it is urgent ( simulation of stepper motor)
  • From: "Alireza Ashtiani" <ali_o_a@hotmail.com>
• Re: Lua sample of line integral
  • From: jim271@hotmail.com
• Help on LUA ...
  • From: "Jose Roberto Camacho" <jrcamacho@ufu.br>
• Re: [femm] Help on LUA ...
  • From: Carl Kopin <carlkopin@yahoo.com>
• Lua 3.1 patch
  • From: "Robin Cornelius" <robin.cornelius@btinternet.com>
• Re: [femm] some bugs?
  • From: dcm3c@aol.com
• RE: [femm] Re: Lua sample of line integral
  • From: "Carl Kopin" <ckopin@davinciresearch.com>
• RE: [femm] Re: Lua sample of line integral
  • From: "Robin Cornelius" <robin.cornelius@hirst-magnetics.com>
• new Lua features
  • From: "Carl Kopin" <ckopin@davinciresearch.com>
• Re: [femm] new Lua features
  • From: David Meeker <dmeeker@foster-miller.com>
• RE: [femm] Re: Lua sample of line integral
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• RE: [femm] Re: Lua sample of line integral
  • From: "Robin Cornelius" <robin.cornelius@btinternet.com>
• Re: Passing parameters with a file
  • From: jim271@hotmail.com
• tetgen
  • From: dcm3c@aol.com
• tetgen
  • From: "Si hang" <sh9988@mail.hz.zj.cn>
• Re: [femm] tetgen
  • From: "you se-ho" <sxy28@hotmail.com>
• LUA question on current density
  • From: jim271@hotmail.com
• Re: [femm] LUA question on current density
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: [femm] LUA question on current density
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] LUA question on current density
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: tetgen
  • From: "Si hang" <sh9988@mail.hz.zj.cn>
• Re: LUA question on current density
  • From: jim271@hotmail.com
• New LUA commands
  • From: jim271@hotmail.com
• i want to be withyou
  • From: eaid goda <eaidgoda@yahoo.com>
• Material for pole pieces of Magnet
  • From: "C F Cheuk" <c_f_cheuk@yahoo.com>
• Re: [femm] Material for pole pieces of Magnet
  • From: "Graham Gunderson" <g_jlnlabs@hotmail.com>
• switched reluctance machine
  • From: eaid goda <eaidgoda@yahoo.com>
• Force at high current density
  • From: jim271@hotmail.com
• Re: [femm] switched reluctance machine
  • From: Alireza Ashtiani <ali_o_a@yahoo.com>
• Re: [femm] Force at high current density
  • From: marctt2@aol.com
• Re: Circuits on femm
  • From: dcm3c@aol.com
• Re: [femm] Material for pole pieces of Magnet
  • From: dcm3c@aol.com
• Re: [femm] Material for pole pieces of Magnet
  • From: "C F Cheuk" <c_f_cheuk@yahoo.com>
• Re: Force at high current density
  • From: jim271@hotmail.com
• News about Tetgen
  • From: "Si hang" <sh9988@mail.hz.zj.cn>
• LUA pause command
  • From: jim271@hotmail.com
• Looking for a paper or catalog ...
  • From: jrcamacho@ufu.br
• Re: Looking for a paper or catalog ...
  • From: jim271@hotmail.com
• Re: [femm] LUA pause command
  • From: Carl Kopin <carlkopin@yahoo.com>
• Help
  • From: Rukmal Jayasinghe <rukmalj@yahoo.com>
• RE: [femm] LUA pause command
  • From: "Robin Cornelius" <robin.cornelius@hirst-magnetics.com>
• Re: LUA pause command
  • From: jim271@hotmail.com
• Circuits in FEMM
  • From: frank.e.lenning@boeing.com
• RE: [femm] script convention
  • From: "Carl Kopin" <ckopin@davinciresearch.com>
• Re: [femm] Circuits in FEMM
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] script convention
  • From: David Meeker <dmeeker@foster-miller.com>
• Worked example needed
  • From: jim.bloor@smiths-aerospace.com
• RE: [femm] script convention
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: [femm] Worked example needed
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• RE: showdensityplot
  • From: "Robin Cornelius" <robin.cornelius@hirst-magnetics.com>
• RE: [femm] script convention
  • From: "Carl Kopin" <ckopin@davinciresearch.com>
• Re: [femm] script convention
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: Circuits in FEMM
  • From: frank.e.lenning@boeing.com
• Re: test
  • From: jim271@hotmail.com
• Attachments
  • From: jim271@hotmail.com
• RE: [femm] Attachments
  • From: "Carl Kopin" <ckopin@davinciresearch.com>
• Re: Attachments
  • From: jim271@hotmail.com
• Re: [femm] Worked example needed
  • From: dcm3c@aol.com
• Re: [femm] Circuits in FEMM
  • From: "you se-ho" <sxy28@hotmail.com>
• Re: [femm] Re: Circuits in FEMM
  • From: dcm3c@aol.com
• Inductance - more confusion
  • From: jim.bloor@smiths-aerospace.com
• Problem with femmview
  • From: Alberto Perez <albertoperarnau@yahoo.es>
• Re: [femm] Inductance - more confusion
  • From: "Jim in_Dallas" <jim271@hotmail.com>
• Re: Circuits in FEMM
  • From: frank.e.lenning@boeing.com
• FEMM scripting bug?
  • From: slindsay@atsautomation.com
• Re: [femm] Inductance - more confusion
  • From: dcm3c@aol.com
• bug fixes
  • From: David Meeker <dmeeker@foster-miller.com>
• mutual inductance
  • From: "mercedes sampere" <m_veinti2@hotmail.com>
• Re: [femm] mutual inductance
  • From: David Meeker <dmeeker@foster-miller.com>
• Permanent Magnets & Frequency.
  • From: stan@brerrabbit.screaming.net
• Re: [femm] Re: Circuits in FEMM
  • From: dcm3c@aol.com
• Re: [femm] Permanent Magnets & Frequency.
  • From: dcm3c@aol.com
• need help
  • From: siva prasad <sivaprasad79@yahoo.co.in>
• FEMM and LUA
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• RE: [femm] FEMM and LUA
  • From: "Robin Cornelius" <robin.cornelius@hirst-magnetics.com>
• RE: [femm] FEMM and LUA
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Help Eddy current in three phase induction motor
  • From: Alberto Perez <albertoperarnau@yahoo.es>
• Re: [femm] Permanent Magnets & Frequency.
  • From: "Stan, ND" <stan@brerrabbit.screaming.net>
• Re: [femm] FEMM and LUA
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] Help Eddy current in three phase induction motor
  • From: "Erdal Bizkevelci" <erdal@ieee.org>
• Re: [femm] Help Eddy current in three phase induction motor
  • From: dcm3c@aol.com
• Re: [femm] Help Eddy current in three phase induction motor
  • From: dcm3c@aol.com
• Need some advice to calculate PCB stray inductance
  • From: neel_c@club-internet.fr
• website moved
  • From: dcm3c@aol.com
• RE: [femm] Help Eddy current in three phase induction motor
  • From: "Jornet" <jornet@ee.upc.es>
• Re: [femm] Help Eddy current in three phase induction motor
  • From: "Erdal Bizkevelci" <erdal@ieee.org>
• Transformer design help needed
  • From: jim.bloor@smiths-aerospace.com
• mutual inductance
  • From: "mercedes sampere" <m_veinti2@hotmail.com>
• Re: [femm] mutual inductance
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• transformer capacitance and inductance
  • From: "Erdal Bizkevelci" <erdal@ieee.org>
• help
  • From: "mercedes sampere" <m_veinti2@hotmail.com>
• Re: [femm] help
  • From: David Meeker <dmeeker@foster-miller.com>
• Transformer stray field
  • From: ara@panosyan.com
• mild steel B/H curves
  • From: Zareh Soghomonian <zareh.soghomonian@wavecrestlabs.com>
• Re: [femm] Transformer stray field
  • From: marctt2@aol.com
• Re: mild steel B/H curves
  • From: lkloesel@mail.qnet.com
• Re: [femm] mild steel B/H curves
  • From: "C F Cheuk" <c_f_cheuk@yahoo.com>
• RE: [femm] mild steel B/H curves
  • From: Zareh Soghomonian <zareh.soghomonian@wavecrestlabs.com>
• Three phase induction motor
  • From: Alberto Perez <albertoperarnau@yahoo.es>
• RE: [femm] Three phase induction motor
  • From: "Jornet" <jornet@ee.upc.es>
• Re: [femm] help
  • From: "mercedes sampere" <m_veinti2@hotmail.com>
• Re: [femm] mild steel B/H curves
  • From: dcm3c@aol.com
• Re: [femm] Three phase induction motor
  • From: dcm3c@aol.com
• Re: [femm] transformer capacitance and inductance
  • From: dcm3c@aol.com
• turns in series
  • From: "mercedes sampere" <m_veinti2@hotmail.com>
• Re: [femm] turns in series
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] help
  • From: David Meeker <dmeeker@foster-miller.com>
• Fwd: demo version of SLIM (second try)
  • From: dcm3c@aol.com
• Trouble with a 90° magnetic filter coil
  • From: jens2504@web.de
• [Circuit Model]
  • From: "you se-ho" <sxy28@hotmail.com>
• Re: [femm] [Circuit Model]
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] Trouble with a 90° magnetic filter coil
  • From: David Meeker <dmeeker@foster-miller.com>
• [no subject]
  • From: Alberto Perez <albertoperarnau@yahoo.es>
• Re: [femm] (unknown)
  • From: David Meeker <dmeeker@foster-miller.com>
• H in magnets
  • From: marco valcavi <mvalca@yahoo.com>
• Re: [femm] H in magnets
  • From: David Meeker <dmeeker@foster-miller.com>
• complex inductance???
  • From: "Erdal Bizkevelci" <erdal903@yahoo.com>
• Re: [femm] complex inductance???
  • From: David Meeker <dmeeker@foster-miller.com>
• [no subject]
  • From: Kuczmann "Miklós" <kuczmann@freemail.hu>
• Re: [femm] complex inductance???
  • From: "Erdal Bizkevelci" <erdal903@yahoo.com>
• Re: [femm] complex inductance???
  • From: dcm3c@aol.com
• RE: [femm] H in magnets
  • From: "ATANASI JORNET" <jornet@ee.upc.es>
• Re: [femm] H in magnets
  • From: dcm3c@aol.com
• Single Phase Induction Motor.
  • From: "kumaran" <kumaran@ecadtech.com>
• RE: [femm] Single Phase Induction Motor.
  • From: "ATANASI JORNET" <jornet@ee.upc.es>
• 3 phase induction motor
  • From: "ATANASI JORNET" <jornet@ee.upc.es>
• Re: [femm] 3 phase induction motor
  • From: David Meeker <dmeeker@foster-miller.com>
• wire drawing
  • From: sakir cavus <e112631@metu.edu.tr>
• Re: [femm] Single Phase Induction Motor.
  • From: "kumaran" <kumaran@ecadtech.com>
• Re: [femm] 3 phase induction motor
  • From: "Erdal Bizkevelci" <erdal.bizkevelci@bilten.metu.edu.tr>
• triangle
  • From: smaïl mezani <s_mezani@yahoo.fr>
• Re: [femm] triangle
  • From: David Meeker <dmeeker@foster-miller.com>
• Transformer ratios
  • From: jim.bloor@smiths-aerospace.com
• Re: [femm] Single Phase Induction Motor.
  • From: "kumaran" <kumaran@ecadtech.com>
• Re: [femm] triangle
  • From: "you se-ho" <sxy28@hotmail.com>
• HV Magnetics Question
  • From: "Mark Jones" <heliosstudios@att.net>
• Re: triangle
  • From: "sihang" <sihang@weboo.com>
• Re: [femm] triangle
  • From: David Meeker <dmeeker@foster-miller.com>
• power factor
  • From: m_veinti2@hotmail.com
• Re: [femm] power factor
  • From: dcm3c@aol.com
• LUA scripting with complex variables (Current etc.)
  • From: dabelsteind@yahoo.com
• RE: [femm] LUA scripting with complex variables (Current etc.)
  • From: "Robin Cornelius" <robin.cornelius@btinternet.com>
• single wire -magnetic potential A problem
  • From: tborzic@yahoo.com
• Re: [femm] single wire -magnetic potential A problem
  • From: dcm3c@aol.com
• Re: single wire -magnetic potential A problem
  • From: tborzic@yahoo.com
• Re: [femm] single wire -magnetic potential A problem
  • From: rm1176@messiah.edu
• Boundary conditions of induction motor
  • From: Alberto Perez <albertoperarnau@yahoo.es>
• lua scripting
  • From: giovanni.bortolan@sogagroup.com
• RE: [femm] lua scripting
  • From: "Robin Cornelius" <robin.cornelius@hirst-magnetics.com>
• Re: [femm] Boundary conditions of induction motor
  • From: dcm3c@aol.com
• relative speed
  • From: brvusit@yahoo.it
• Re: [femm] relative speed
  • From: Alberto Perez <albertoperarnau@yahoo.es>
• Re: [femm] relative speed
  • From: David Meeker <dmeeker@foster-miller.com>
• editor for LUA - conTEXT
  • From: vecerkaj@yahoo.com
• Eddy currents in thick laminations
  • From: Douglas@magtech.co.uk
• LEAKAGE REACTANCE
  • From: "obilgin" <obilgin@selcuk.edu.tr>
• Re: [femm] editor for LUA - conTEXT
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: [femm] Eddy currents in thick laminations
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] Eddy currents in thick laminations
  • From: David Meeker <dmeeker@foster-miller.com>
• 3 phase cable
  • From: lkloesel@mail.qnet.com
• problem with lua function copyrotate
  • From: giovanni.bortolan@sogagroup.com
• Re: [femm] Eddy currents in thick laminations
  • From: "Paulo Pereirinha" <ppereiri@isr.uc.pt>
• Re: [femm] editor for LUA - conTEXT
  • From: "Paulo Pereirinha" <ppereiri@isr.uc.pt>
• Re: [femm] 3 phase cable
  • From: dcm3c@aol.com
• Re: [femm] LEAKAGE REACTANCE
  • From: dcm3c@aol.com
• Re: [femm] triangle
  • From: "you se-ho" <sxy28@hotmail.com>
• Re: [femm] triangle
  • From: dcm3c@aol.com
• Ynt: [femm] LEAKAGE REACTANCE
  • From: "obilgin" <obilgin@selcuk.edu.tr>
• Inductance with permanent magnet
  • From: vecerkaj@yahoo.com
• Re: [femm] problem with lua function copyrotate
  • From: David Meeker <dmeeker@foster-miller.com>
• 3 phase cable/animation & thanks
  • From: lkloesel@mail.qnet.com
• TO OBILGIN
  • From: "mercedes sampere" <m_veinti2@hotmail.com>
• Re: [femm] complex inductance???
  • From: "you se-ho" <sxy28@hotmail.com>
• long filename
  • From: vecerkaj@yahoo.com
• Re: [femm] long filename
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: [femm] TO OBILGIN
  • From: Alberto Perez <albertoperarnau@yahoo.es>
• Re: [femm] complex inductance???
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] Inductance with permanent magnet
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: long filename
  • From: vecerkaj@yahoo.com
• copyrotate and addarc
  • From: giovanni.bortolan@sogagroup.com
• Re: [femm] copyrotate and addarc
  • From: David Meeker <dmeeker@foster-miller.com>
• Hoole Reference
  • From: lkloesel@mail.qnet.com
• Re: [femm] Hoole Reference
  • From: dcm3c@aol.com
• modifycricprop() error
  • From: ouborg@ucla.edu
• Re: [femm] modifycricprop() error
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: [femm] modifycricprop() error
  • From: David Meeker <dmeeker@foster-miller.com>
• Some more bug report that you like
  • From: giovanni.bortolan@sogagroup.com
• inductance
  • From: Tomislav Borzic <tborzic@yahoo.com>
• Re: [femm] inductance
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] inductance - axisymmetric model
  • From: "Jim in_Dallas" <jim271@hotmail.com>
• Re: inductance
  • From: tborzic@yahoo.com
• Re: inductance - axisymmetric model
  • From: tborzic@yahoo.com
• [no subject]
  • From: "H.G." <garciah@flash.net>
• Neumann boundary condition
  • From: "Si hang" <sh9988@mail.hz.zj.cn>
• Re: inductance - axisymmetric model
  • From: tborzic@yahoo.com
• Re: [femm] Re: inductance - revised axisymmetric model
  • From: "Jim in_Dallas" <jim271@hotmail.com>
• Re: [femm] Re: inductance - revised axisymmetric model - fem files attached
  • From: "Jim in_Dallas" <jim271@hotmail.com>
• Re: inductance - revised axisymmetric model
  • From: tborzic@yahoo.com
• Re: [femm] Re: inductance - parallel strips
  • From: "Jim in_Dallas" <jim271@hotmail.com>
• Re: [femm] Re: inductance - revised axisymmetric model
  • From: dcm3c@aol.com
• Eddy currents in a planar shield
  • From: "emiliano.menghi@inwind.it"<emiliano.menghi@inwind.it>
• Inductance by means of his definition
  • From: Alberto Perez <albertoperarnau@yahoo.es>
• similar software
  • From: sabakrishna@hotmail.com
• Re: inductance - parallel strips
  • From: Tomislav Borzic <tborzic@yahoo.com>
• Re: [femm] similar software
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] Neumann boundary condition
  • From: dcm3c@aol.com
• Re: [femm] Re: inductance - parallel strips
  • From: "Jim in_Dallas" <jim271@hotmail.com>
• Re: [femm] Re: inductance - parallel strips
  • From: "you se-ho" <sxy28@hotmail.com>
• [Does injecting current change the indutanc and resistance values ?]
  • From: "you se-ho" <sxy28@hotmail.com>
• Coil freq. help
  • From: " Alexandru Marian" <sestert@yahoo.com>
• Coil Dimensions
  • From: "Samuel Ace Winchenbach" <swinchen@eece.maine.edu>
• Re: Coil Dimensions
  • From: jim271@hotmail.com
• Re: Inductance using FEMM
  • From: jim271@hotmail.com
• Re: [femm] Inductance by means of his definition
  • From: dcm3c@aol.com
• Re: [femm] Eddy currents in a planar shield
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] Re: inductance - parallel strips
  • From: dcm3c@aol.com
• Re: [femm] [Does injecting current change the indutanc and resistance values ?]
  • From: dcm3c@aol.com
• Re: [femm] Inductance by means of his definition
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: inductance - parallel strips
  • From: tborzic@yahoo.com
• Re: induction machine inductance calculations
  • From: Alberto Perez <albertoperarnau@yahoo.es>
• High Frequency Magnetics
  • From: Rukmal Jayasinghe <rukmalj@yahoo.com>
• Quick Finite Element Method
  • From: ata.ozkaya@alcatel.com.tr
• plot contours
  • From: tborzic@yahoo.com
• Re: plot contours
  • From: vecerkaj@yahoo.com
• Re: induction machine inductance calculations
  • From: Alberto Perez <albertoperarnau@yahoo.es>
• Re: plot contours
  • From: tborzic@yahoo.com
• Cogging torque
  • From: robin.cornelius@hirst-magnetics.com
• Re: [femm] Cogging torque
  • From: dcm3c@aol.com
• Re: Cogging torque
  • From: vecerkaj@yahoo.com
• torque calculation and periodic boundary
  • From: giovanni.bortolan@sogagroup.com
• AC LVDT analysis sample
  • From: tsiporak@hotmail.com
• RE: [femm] torque calculation and periodic boundary
  • From: "Robin Cornelius" <robin.cornelius@hirst-magnetics.com>
• Lua sample script
  • From: "ATANASI JORNET" <jornet@ee.upc.es>
• job opportunity
  • From: Zareh Soghomonian <zareh.soghomonian@wavecrestlabs.com>
• Steel properties
  • From: Alberto Perez <albertoperarnau@yahoo.es>
• Further cogging torque problems
  • From: "Robin Cornelius" <robin.cornelius@hirst-magnetics.com>
• Re: High Frequency Magnetics
  • From: todorfil@yahoo.com
• RE: [femm] Steel properties
  • From: "Davis, Richard W (WNS)" <richard.w.davis@attws.com>
• Chasing R.L. Stoll book.
  • From: "Alfredo de Blas \(EUETIB-UPC\)" <alfredo.de.blas@upc.es>
• AWG Table
  • From: "Samuel Ace Winchenbach" <swinchen@eece.maine.edu>
• RE: [femm] Steel properties
  • From: "Carlos Crespo" <ccrespo@laof.com.ar>
• Re: [femm] AWG Table
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] Chasing R.L. Stoll book.
  • From: jrcamacho@ufu.br
• RE: [femm] AWG Table
  • From: "Davis, Richard W (WNS)" <richard.w.davis@attws.com>
• RE: [femm] Chasing R.L. Stoll book.
  • From: "Davis, Richard W (WNS)" <richard.w.davis@attws.com>
• Hello
  • From: "Mok Thye Luen" <luen@pd.jaring.my>
• Gradient?
  • From: "Vencislav" <vencib@yahoo.com>
• femm and wine/linux
  • From: "Stefan Engstrom" <stefan.engstrom@mcmail.vanderbilt.edu>
• Re: [femm] femm and wine/linux
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] Gradient?
  • From: David Meeker <dmeeker@foster-miller.com>
• How to measure force on linear system?
  • From: "Davis, Richard W (WNS)" <richard.w.davis@attws.com>
• FEMM crashes
  • From: "Willem-Jan Ouborg" <ouborg@ucla.edu>
• Linux and 3D
  • From: Alexandre Carvalho <carvalhoamc@yahoo.com.br>
• RE: [femm] AWG Table
  • From: "Carlos Crespo" <ccrespo@laof.com.ar>
• Re: [femm] How to measure force on linear system?
  • From: David Meeker <dmeeker@foster-miller.com>
• Lorentz force
  • From: "mercedes sampere" <m_veinti2@hotmail.com>
• Re: [femm] Lorentz force
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] Linux and 3D
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] FEMM crashes
  • From: David Meeker <dmeeker@foster-miller.com>
• Binary data files
  • From: bryanbarnard2002@yahoo.co.uk
• RE: [femm] Binary data files
  • From: "Robin Cornelius" <robin.cornelius@btinternet.com>
• tooth pulsation iron losses by femm
  • From: "Atanasi Jornet" <jornet@ee.upc.es>
• Re: femm and wine/linux
  • From: "sengstrom" <stefan.engstrom@mcmail.vanderbilt.edu>
• Why femm sometimes never finised the calculation ?
  • From: "matthewc_98" <matthewc_98@yahoo.com>
• Re: [femm] Why femm sometimes never finised the calculation ?
  • From: David Meeker <dmeeker@foster-miller.com>
• Incorrect Field values returned by FEMM
  • From: "cgn38nuc" <cgn38nuc@yahoo.com>
• Re: Why femm sometimes never finised the calculation ?
  • From: "matthewc_98" <matthewc_98@yahoo.com>
• Re: [femm] Re: Why femm sometimes never finised the calculation ?
  • From: David Meeker <dcm3c@earthlink.net>
• Re: [femm] Incorrect Field values returned by FEMM
  • From: David Meeker <dcm3c@earthlink.net>
• Re: Incorrect Field values returned by FEMM
  • From: "vecerkaj" <vecerkaj@yahoo.com>
• OT: Eddy current brake
  • From: "arnaud_westenberg" <arnaud@wanadoo.nl>
• The contour creation for force calculation
  • From: "matthewc_98" <matthewc_98@yahoo.com>
• Re: [femm] The contour creation for force calculation
  • From: David Meeker <dcm3c@earthlink.net>
• Solenoid Modelling Question
  • From: "gopalan_m" <gopalan_m@yahoo.com>
• Force and torque from stress tensor
  • From: Alberto Perez <albertoperarnau@yahoo.es>
• Re: [femm] The contour creation for force calculation
  • From: "Israel Kehaty" <tsiporak@hotmail.com>
• Re: [femm] The contour creation for force calculation
  • From: matthew chung <matthewc_98@yahoo.com>
• Re: [femm] Solenoid Modelling Question
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] Force and torque from stress tensor
  • From: David Meeker <dcm3c@earthlink.net>
• Re: The contour creation for force calculation
  • From: "jim_271" <jim271@hotmail.com>
• permanent magnet in harmonic analysis
  • From: "eborkent" <eborkent@yahoo.com>
• Re: [femm] permanent magnet in harmonic analysis
  • From: David Meeker <dcm3c@earthlink.net>
• [Fwd: Higher frequencies]
  • From: David Meeker <dcm3c@earthlink.net>
• Wrong x axes values in the xyplot
  • From: "james_p_peng" <james_p_peng@hotmail.com>
• Re: Wrong x axes values in the xyplot
  • From: "stsc_sh" <sh9988@mail.hz.zj.cn>
• Re: Wrong x axes values in the xyplot
  • From: "james_p_peng" <james_p_peng@hotmail.com>
• Re: [femm] Re: Wrong x axes values in the xyplot
  • From: "sihang" <sh9988@mail.hz.zj.cn>
• [no subject]
  • From: Rodica Popa <rpopa@oper.ro>
• Re: Wrong x axes values in the xyplot
  • From: "james_p_peng" <james_p_peng@hotmail.com>
• Interesting article
  • From: David Meeker <dcm3c@earthlink.net>
• RE: [femm] Interesting article
  • From: "Davis, Richard W (WNS)" <richard.w.davis@attws.com>
• Re: permanent magnet in harmonic analysis
  • From: E-J Borkent <eborkent@yahoo.com>
• Re: permanent magnet in harmonic analysis
  • From: "dcm3c" <dcm3c@earthlink.net>
• file name update
  • From: "Carl Kopin" <ckopin@davinciresearch.com>
• Re: [femm] file name update
  • From: David Meeker <dmeeker@foster-miller.com>
• Inductance of two conductors
  • From: "gudul" <philippe.lautier@videotron.ca>
• Polar coordinate in Lua commands
  • From: "daidopj" <yoshida@daidopj.com>
• Re: [femm] Inductance of two conductors
  • From: David Meeker <dcm3c@earthlink.net>
• Re: [femm] Polar coordinate in Lua commands
  • From: David Meeker <dmeeker@foster-miller.com>
• RE: [femm] Inductance of two conductors
  • From: "Martin, Dick" <dick@imtmems.com>
• torque computation
  • From: "Diego Perez Lara" <diego.perez.lar@terra.es>
• Ansys electromagnetism
  • From: agnaldo@if.ufrj.br
• RE: [femm] Ansys electromagnetism
  • From: "McGinnis, Peter J." <peter.mcginnis@heath.condorpacific.com>
• Re: [femm] torque computation
  • From: David Meeker <dcm3c@earthlink.net>
• Nonlinear time harmonic formulation
  • From: David Meeker <dcm3c@earthlink.net>
• Rif: [femm] torque computation
  • From: giovanni.bortolan@sogagroup.com
• Re: Rif: [femm] torque computation
  • From: "Diego Perez Lara" <diego.perez.lar@terra.es>
• read out the data
  • From: "eborkent" <eborkent@yahoo.com>
• Re: read out the data
  • From: "dcm3c" <dcm3c@earthlink.net>
• Permanent magnets
  • From: steudner@surfeu.de
• Re: [femm] Permanent magnets
  • From: David Meeker <dcm3c@earthlink.net>
• reading out data with lua grid script
  • From: "eborkent" <eborkent@yahoo.com>
• Re: [femm] reading out data with lua grid script
  • From: David Meeker <dmeeker@foster-miller.com>
• torque calculation
  • From: "Diego Perez Lara" <diego.perez.lar@terra.es>
• Hello
  • From: "Tony Gallistel" <agallist@lkdllink.lkdllink.net>
• Re: [femm] Hello
  • From: tg.gupta@tbg.tvse.co.in
• Re: [femm] Hello
  • From: "C F Cheuk" <c_f_cheuk@yahoo.com>
• Re: Wrong x axes values in the xyplot
  • From: "dcm3c" <dcm3c@earthlink.net>
• Some wished improvements
  • From: giovanni.bortolan@sogagroup.com
• Re: Linux and 3D
  • From: "isbaker007" <isbaker@bigpond.com>
• Paper that uses FEMM
  • From: <carvalhoamc@yahoo.com.br>
• RE: [femm] Re: Linux and 3D
  • From: "Robin Cornelius" <robin.cornelius@hirst-magnetics.com>
• Re: [femm] A summury - Sunpower
  • From: "Tony Gallistel" <agallist@lkdllink.lkdllink.net>
• [no subject]
  • From: "Davis, Richard W (WNS)" <richard.w.davis@attws.com>
• RE: [femm] Hello
  • From: "Carl Kopin" <ckopin@davinciresearch.com>
• Re: [femm] Re: Wrong x axes values in the xyplot
  • From: "James Peng" <james_p_peng@hotmail.com>
• Re: [femm] Re: Linux and 3D
  • From: Victor Bellido-Gonzalez <victor@gencoa.com>
• Re: [femm] torque calculation
  • From: David Meeker <dcm3c@earthlink.net>
• Re: [femm] Re: Linux and 3D
  • From: Russell Shaw <rjshaw@iprimus.com.au>
• Re: [femm] Hello
  • From: "C F Cheuk" <c_f_cheuk@yahoo.com>
• Translations
  • From: David Meeker <dcm3c@earthlink.net>
• RE: [femm] Re: Linux and 3D
  • From: "Robin Cornelius" <robin.cornelius@hirst-magnetics.com>
• Re: [femm] Re: Linux and 3D
  • From: "sihang" <sh9988@mail.hz.zj.cn>
• Re: [femm] Paper that uses FEMM
  • From: David Meeker <dcm3c@earthlink.net>
• Re: [femm] Paper that uses FEMM
  • From: Alexandre Carvalho <carvalhoamc@yahoo.com.br>
• Re: [femm] Re: Linux and 3D
  • From: David Meeker <dcm3c@earthlink.net>
• 3D Code (was Re: Linux and 3D)
  • From: David Meeker <dcm3c@earthlink.net>
• Re: [femm] Paper that uses FEMM
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Preprocessor +LUA from command line
  • From: "vecerkaj" <vecerkaj@yahoo.com>
• RE: [femm] 3D Code (was Re: Linux and 3D)
  • From: Mark Smith <mark.smith@linx.co.uk>
• Re: [femm] Preprocessor +LUA from command line
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] 3D Code (was Re: Linux and 3D)
  • From: "sihang" <sh9988@mail.hz.zj.cn>
• Re: [femm] 3D Code (was Re: Linux and 3D)
  • From: Alexandre Carvalho <carvalhoamc@yahoo.com.br>
• Re: [femm] 3D Code (was Re: Linux and 3D)
  • From: David Meeker <dcm3c@earthlink.net>
• FEMM + MathCad
  • From: Gal Janos <jgal@hunelec.hu>
• Re: [femm] 3D Code
  • From: David Meeker <dmeeker@foster-miller.com>
• Asymptotic boundary condition
  • From: marco valcavi <mvalca@yahoo.com>
• Re: [femm] Asymptotic boundary condition
  • From: David Meeker <dmeeker@foster-miller.com>
• Lua zoom & grid
  • From: "Carl Kopin" <ckopin@davinciresearch.com>
• RE: [femm] Lua zoom & grid
  • From: "Robin Cornelius" <robin.cornelius@btinternet.com>
• RE: [femm] Lua zoom & grid
  • From: "Robin Cornelius" <robin.cornelius@btinternet.com>
• Re: [femm] FEMM + MathCad
  • From: "C F Cheuk" <c_f_cheuk@yahoo.com>
• RE: [femm] Lua zoom & grid
  • From: "Carl Kopin" <ckopin@davinciresearch.com>
• [femm] Lua zoom & grid
  • From: "Carl Kopin" <ckopin@davinciresearch.com>
• RE: [femm] FEMM + MathCad
  • From: "Carl Kopin" <ckopin@davinciresearch.com>
• Triangulation!
  • From: celia lauar <celialauarbr@yahoo.com.br>
• Re: [femm] Triangulation!
  • From: Alexandre Carvalho <carvalhoamc@yahoo.com.br>
• Re: [femm] Triangulation!
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] FEMM + MathCad
  • From: "C F Cheuk" <c_f_cheuk@yahoo.com>
• Re: [femm] FEMM + MathCad
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] Triangulation!
  • From: "you se-ho" <sxy28@hotmail.com>
• RE: [femm] FEMM + MathCad
  • From: Finlay Evans <finlay.evans@renishaw.com>
• RE: [femm] FEMM + MathCad
  • From: Gal Janos <jgal@hunelec.hu>
• Default view settings
  • From: "Carl Kopin" <ckopin@davinciresearch.com>
• Re: [femm] Triangulation!
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] Default view settings
  • From: "Prem Kumar C" <prem@bhelrnd.co.in>
• nonferrous electromagnets
  • From: <dmeeker@foster-miller.com>
• RE: [femm] Default view settings
  • From: "Carl Kopin" <ckopin@davinciresearch.com>
• Re: Default view settings
  • From: "dcm3c" <dcm3c@earthlink.net>
• Re: [femm] Default view settings
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] nonferrous electromagnets
  • From: David Meeker <dmeeker@foster-miller.com>
• RE: [femm] Default view settings
  • From: "Carl Kopin" <ckopin@davinciresearch.com>
• RE: [femm] nonferrous electromagnets
  • From: "kirk" <kirk@3rivers.net>
• RE: [femm] nonferrous electromagnets
  • From: "Joe" <jflynn@flynnresearch.net>
• Re: [femm] nonferrous electromagnet
  • From: David Meeker <dcm3c@earthlink.net>
• Re: nonferrous electromagnets
  • From: "sunshine_80918" <sunshine_80918@yahoo.com>
• [no subject]
  • From: marco valcavi <mvalca@yahoo.com>
• Re: [femm] (unknown)
  • From: David Meeker <dcm3c@earthlink.net>
• Re: [femm] Re: nonferrous electromagnets
  • From: "Sebastià" <sje@tinet.org>
• Re: nonferrous electromagnets
  • From: "sunshine_80918" <sunshine_80918@yahoo.com>
• Request for 2 small features...
  • From: "davehyre" <davehyre@yahoo.com>
• [no subject]
  • From: <dmeeker@foster-miller.com>
• Complex Coil Gun Simulation, Lua Scripts, and Mesh Sizes
  • From: "Samuel Ace Winchenbach" <swinchen@eece.maine.edu>
• formulas
  • From: "jthunder121870" <jthunder121870@yahoo.com>
• Re: [femm] Request for 2 small features...
  • From: David Meeker <dcm3c@earthlink.net>
• Re: [femm] formulas
  • From: David Meeker <dcm3c@earthlink.net>
• Very minor erratum in latest FEMM documentation
  • From: "marsupiofr" <marsupio@hotmail.com>
• Modelling Ferrite Cores
  • From: "jamesbloor" <jim.bloor@smiths-aerospace.com>
• RE: [femm] Modelling Ferrite Cores
  • From: Gal Janos <jgal@hunelec.hu>
• Modelling loudspeaker magnets..
  • From: "emacoustics" <michael.wheeler@ic.ac.uk>
• Re: [femm] Modelling loudspeaker magnets..
  • From: Dave Squires <djsquires@plix.com>
• Re: [femm] Modelling loudspeaker magnets..
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: Modelling loudspeaker magnets..
  • From: "davehyre" <davehyre@yahoo.com>
• gauss
  • From: "jthunder121870" <jthunder121870@yahoo.com>
• Re: [femm] Modelling loudspeaker magnets..
  • From: "C F Cheuk" <c_f_cheuk@yahoo.com>
• Re: [femm] gauss
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Diamagnetism
  • From: "roberthillier" <roberthillier@yahoo.co.uk>
• savebitmap error
  • From: "gusds" <gds@gds-sistemas.com>
• RE: [femm] savebitmap error
  • From: "Robin Cornelius" <robin.cornelius@hirst-magnetics.com>
• Re: [femm] savebitmap error
  • From: GDS <gds@gds-sistemas.com>
• Metals
  • From: "Samuel Ace Winchenbach" <swinchen@eece.maine.edu>
• Re: [femm] gauss
  • From: Dave Squires <djsquires@plix.com>
• Re: [femm] Metals
  • From: marctt2@aol.com
• Re: [femm] Diamagnetism
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] Metals
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] Diamagnetism
  • From: Dave Squires <djsquires@plix.com>
• yet more speaker modelling questions....
  • From: "emacoustics" <michael.wheeler@ic.ac.uk>
• Translated manual
  • From: David Meeker <dcm3c@earthlink.net>
• gauss
  • From: "jthunder121870" <jthunder121870@yahoo.com>
• Re: [femm] gauss
  • From: "Antonio F.R. Carabio" <ingacarabio@fibertel.com.ar>
• RE: [femm] gauss
  • From: "McGinnis, Peter J." <peter.mcginnis@heath.condorpacific.com>
• Re: [femm] gauss
  • From: Didier Hérisson <herissond@libertysurf.fr>
• Re: gauss
  • From: "vecerkaj" <vecerkaj@yahoo.com>
• Re: [femm] Diamagnetism
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: [femm] gauss
  • From: "Antonio F.R. Carabio" <ingacarabio@fibertel.com.ar>
• Re: [femm] Diamagnetism
  • From: David Meeker <dcm3c@earthlink.net>
• magnets
  • From: mgurrola1@juno.com
• Re: [femm] magnets
  • From: "H.Hasper" <h.hasper@phys.rug.nl>
• RE: [femm] savebitmap error
  • From: "Robin Cornelius" <robin.cornelius@hirst-magnetics.com>
• RE: [femm] Metals
  • From: "Eric Anderfaas" <anderfaas@rodmillen.com>
• Re: Metals
  • From: "martin_siebert_timmer" <siebertm@cadvision.com>
• RE: [femm] Re: Metals
  • From: "Charlie Popeck" <cpopeck@poweraisle.com>
• RE: [femm] Re: Metals
  • From: Mark Smith <mark.smith@linx.co.uk>
• Import DXF - improvement
  • From: "vecerkaj" <vecerkaj@yahoo.com>
• i need a BH curve graph
  • From: "jmarquez937035" <jmarquez937035@yahoo.com.mx>
• Re: Import DXF - improvement
  • From: "davehyre" <davehyre@yahoo.com>
• RE: [femm] i need a BH curve graph
  • From: "McGinnis, Peter J." <peter.mcginnis@heath.condorpacific.com>
• Re: [femm] i need a BH curve graph
  • From: "Antonio F.R. Carabio" <ingacarabio@fibertel.com.ar>
• FEMM homepage and help
  • From: "emacoustics" <michael.wheeler@ic.ac.uk>
• Re: [femm] Import DXF - improvement
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] FEMM homepage and help
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] FEMM homepage and help
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Dynamic Animations
  • From: "Franklin Amador" <fdamador2001@yahoo.com>
• Re: [femm] i need a BH curve graph
  • From: JORGE LUIS <jorgemirez2000@yahoo.com>
• Solenoid Force Calc using Cosmos/EMS
  • From: "mmokeddem" <mmokeddem@yahoo.com>
• RE: [femm] i need a BH curve graph
  • From: "Carlos Crespo" <ccrespo@laof.com.ar>
• i need more information
  • From: mohamed karakache <mkarakdz@yahoo.fr>
• Dynamic Animations
  • From: "fdamador2001" <fdamador2001@yahoo.com>
• Re: [femm] Dynamic Animations
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• [femm] FEMM on other platform ?
  • From: Didier Hérisson <herissond@libertysurf.fr>
• Ferromagnetism reference
  • From: Greg Quinting <gregq@iei.net>
• Re: [femm] Ferromagnetism reference - correction
  • From: "Gregory R. Quinting" <gregq@iei.net>
• Re: [femm] Dynamic Animations
  • From: "Per Andreasson" <per.ob.andreasson@telia.com>
• Re: [femm] Dynamic Animations
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Skin effect at nonsinusiodal current
  • From: V.Petoukhov <V.Petoukhov@mail.ru>
• Re: Skin effect at nonsinusiodal current
  • From: "rob_strandau" <rstrand@ihug.com.au>
• RE: [femm] Dynamic Animations
  • From: "Franklin Amador" <fdamador2001@yahoo.com>
• Re: [femm] Dynamic Animations
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Skin effect at nonsinusiodal current
  • From: "W. W. Koepsel" <wkoepsel@worldnet.att.net>
• Re[2]: [femm] Skin effect at nonsinusiodal current
  • From: V.Petoukhov <V.Petoukhov@mail.ru>
• RE: [femm] Re: Skin effect at nonsinusiodal current
  • From: "Gal Janos" <jgal@hunelec.hu>
• Gratitude
  • From: V.Petoukhov <V.Petoukhov@mail.ru>
• RE: [femm] Re: Skin effect at nonsinusiodal current
  • From: "H.Hasper" <h.hasper@phys.rug.nl>
• plot x-y
  • From: "salloker" <michael.salloker@fh-joanneum.at>
• Re: [femm] plot x-y
  • From: David Meeker <dmeeker@ieee.org>
• Coil with multiple turns
  • From: "milanhampl" <milanhampl@yahoo.co.uk>
• Re: [femm] Coil with multiple turns
  • From: David Meeker <dmeeker@ieee.org>
• RE: [femm] Coil with multiple turns
  • From: "Adrian" <adrianw@solid-state-logic.com>
• contour plots
  • From: George Yoshinaka <geo@lingoman.dk>
• RE: [femm] Coil with multiple turns
  • From: Finlay Evans <finlay.evans@renishaw.com>
• i need information
  • From: mohamed karakache <mkarakdz@yahoo.fr>
• AC Solenoid example
  • From: "bdearl65" <brianearl@tri-techllc.com>
• Re: [femm] AC Solenoid example
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] contour plots
  • From: David Meeker <dmeeker@ieee.org>
• voltage gradient
  • From: smaïl mezani <s_mezani@yahoo.fr>
• direction of magnitization
  • From: "Brad Frustaglio" <bmfrusta@yahoo.com>
• inquiary
  • From: "haith_sadii" <haith_sadii@yahoo.com>
• Re: [femm] voltage gradient
  • From: David Meeker <dmeeker@ieee.org>
• Re: direction of magnitization
  • From: "vecerkaj" <vecerkaj@yahoo.com>
• Re: [femm] inquiary
  • From: Miguel Gonzalez Larriba <rodamar_ing@yahoo.com>
• Re: [femm] voltage gradient
  • From: smaïl mezani <s_mezani@yahoo.fr>
• leakage inductance
  • From: "salloker" <michael.salloker@fh-joanneum.at>
• FEMM on Linux
  • From: Robert Kopp <iconoklastic@yahoo.com>
• Re: [femm] direction of magnitization
  • From: David Meeker <dmeeker@ieee.org>
• Lua questions
  • From: GDS <gds@gds-sistemas.com>
• magnetization curves for steels used in reinforced concrete.
  • From: <naasson@feb.unesp.br>
• Re: Lua questions
  • From: "jim_271" <jim271@hotmail.com>
• Re: [femm] Re: Lua questions
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: [femm] Re: Lua questions
  • From: GDS <gds@gds-sistemas.com>
• leakage inductance
  • From: "salloker" <michael.salloker@fh-joanneum.at>
• Re: [femm] Skin effect at nonsinusiodal current
  • From: se-ho you <back_up_id@yahoo.com>
• Re: [femm] Lua questions
  • From: David Meeker <dmeeker@ieee.org>
• Minor documentation change
  • From: Rick Zrostlik <rick.zrostlik@etrema-usa.com>
• Re: [femm] Hang-up questions
  • From: Tom Hansen <tomh@sonic.net>
• harmonic analysis
  • From: "salloker" <michael.salloker@fh-joanneum.at>
• Demagnetization
  • From: "casvdpaal" <cas.vd.paal@goudsmit-magnetics.nl>
• complex torque
  • From: smaïl mezani <s_mezani@yahoo.fr>
• Re: [femm] harmonic analysis
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Hang-up questions
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] complex torque
  • From: David Meeker <dmeeker@ieee.org>
• Different methods for calculating force
  • From: "dfj_stevenson" <Douglas@magtech.co.uk>
• Torque calculation
  • From: Garmendia Azurmendi Iñaki <inaki@inasmet.es>
• Re: [femm] Torque calculation
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Different methods for calculating force
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Demagnetization
  • From: "Игорь Мухин" <muhin@tvcom.ru>
• Re: Torque calculation
  • From: "vecerkaj" <vecerkaj@yahoo.com>
• problem with convergence
  • From: giovanni.bortolan@sogagroup.com
• 3D problems
  • From: Jim Duey <jduey@ccc-dcs.com>
• Force on a conductor?
  • From: "emacoustics" <michael.wheeler@ic.ac.uk>
• Re: leakage inductance
  • From: "joeriel" <joer@k-online.com>
• group assignement in LUA
  • From: "TMax" <trovamax@inwind.it>
• Re: group assignement in LUA + another question
  • From: "vecerkaj" <vecerkaj@yahoo.com>
• Torque calculation (2)
  • From: <Inaki@inasmet.es>
• Alnico magnet model?
  • From: Dave Squires <djsquires@plix.com>
• Re: [femm] problem with convergence
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Re: group assignement in LUA + another question
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Force on a conductor?
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Alnico magnet model?
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Alnico magnet model?
  • From: djsquires@plix.com
• Axi-symmetric arcs for FEMMVIEW
  • From: djsquires@plix.com
• Re: Axi-symmetric arcs for FEMMVIEW
  • From: "vecerkaj" <vecerkaj@yahoo.com>
• Re: [femm] Axi-symmetric arcs for FEMMVIEW
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: Torque calculation (2)
  • From: "vecerkaj" <vecerkaj@yahoo.com>
• Re: [femm] Axi-symmetric arcs for FEMMVIEW
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Axi-symmetric arcs for FEMMVIEW
  • From: Dave Squires <djsquires@plix.com>
• Re: [femm] Axi-symmetric arcs for FEMMVIEW
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Re: Axi-symmetric arcs for FEMMVIEW
  • From: Dave Squires <djsquires@plix.com>
• Re: [femm] Axi-symmetric arcs for FEMMVIEW
  • From: Dave Squires <djsquires@plix.com>
• info on toroidal coils
  • From: "anu_jsingh" <anu_jsingh@yahoo.com>
• Re: [femm] Axi-symmetric arcs for FEMMVIEW
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Pseudo 3D
  • From: Dave Squires <djsquires@plix.com>
• Negative Group Numbers
  • From: Joe Riel <joer@k-online.com>
• Re: [femm] Re: Torque calculation (2)
  • From: David Meeker <dmeeker@ieee.org>
• Automation
  • From: agnaldo@if.ufrj.br
• RE: [femm] Automation
  • From: Finlay Evans <finlay.evans@renishaw.com>
• Re: Lorentz force
  • From: "lorikloesel" <lkloesel@mail.qnet.com>
• contactor force
  • From: "lanzador" <lanzador@ozu.es>
• Torque calculation (3) Eddy currents
  • From: Garmendia Azurmendi Iñaki <inaki@inasmet.es>
• Re: [femm] Torque calculation (3) Eddy currents
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Re: Lorentz force
  • From: David Meeker <dmeeker@ieee.org>
• RE: [femm] FEMM + MathCad
  • From: "Gal Janos" <jgal@hunelec.hu>
• RE: [femm] FEMM + MathCad
  • From: Finlay Evans <finlay.evans@renishaw.com>
• ironloss.pdf
  • From: Mark Smith <mark.smith@linx.co.uk>
• B-H curve
  • From: Mark Smith <mark.smith@linx.co.uk>
• Re: [femm] B-H curve
  • From: "Gregory R. Quinting" <gregq@iei.net>
• FEMM & matlab
  • From: "salloker" <michael.salloker@fh-joanneum.at>
• induction motor and impedance boundary condition
  • From: smaïl mezani <s_mezani@yahoo.fr>
• How did U do to install LUA
  • From: Tsarafidy RAMINOSOA <tsarafidy@yahoo.fr>
• Re: [femm] How did U do to install LUA
  • From: David Meeker <dmeeker@ieee.org>
• fkn on Linux
  • From: jim <jim@weathercom.com>
• Code Lua!
  • From: celia lauar <celialauarbr@yahoo.com.br>
• Re: [femm] Code Lua!
  • From: "S krishnakumar" <sabakrishna@hotmail.com>
• Re: Code Lua!
  • From: "vecerkaj" <vecerkaj@yahoo.com>
• Re: interest about this [femm] FEMM + MathCad
  • From: "dragospopa" <dragospopa@pcnet.ro>
• lua scripts
  • From: "mvalca" <mvalca@yahoo.com>
• RE: [femm] lua scripts
  • From: "Robin Cornelius" <robin.cornelius@hirst-magnetics.com>
• Re: [femm] lua scripts
  • From: David Meeker <dmeeker@ieee.org>
• Spectral domain
  • From: "mikha_9292" <mikha_9292@yahoo.com>
• current density
  • From: mohamed karakache <mkarakdz@yahoo.fr>
• Re: [femm] current density
  • From: Dave Squires <djsquires@plix.com>
• Re: [femm] current density
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] current density
  • From: Dave Squires <djsquires@plix.com>
• Re: [femm] current density
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] current density
  • From: Dave Squires <djsquires@plix.com>
• r-component of force in problems with axisymmetric geometry
  • From: "James Rabchuk" <ja-rabchuk@wiu.edu>
• Re: [femm] r-component of force in problems with axisymmetric geometry
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] r-component of force in problems with axisymmetric geometry
  • From: Xia Chen <xchen4@umbc.edu>
• Re: [femm] r-component of force in problems with axisymmetric geometry
  • From: Dave Squires <djsquires@plix.com>
• analytic form
  • From: Alexander Kondrachuk <kondr@kondr.kiev.ua>
• current density
  • From: mohamed karakache <mkarakdz@yahoo.fr>
• Re: analytic form
  • From: "davehyre" <davehyre@yahoo.com>
• Re: analytic form
  • From: "vecerkaj" <vecerkaj@yahoo.com>
• Ferrite cores
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [femm] Ferrite cores
  • From: awohlberg <awohlberg@monmouth.com>
• Re: [femm] Ferrite cores
  • From: Rukmal Jayasinghe <rukmalj@yahoo.com>
• RE: [femm] Ferrite cores
  • From: Andrew Myers <andrew@mqimag.co.uk>
• Re: [femm] Ferrite cores
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] To all femm users
  • From: oliverthesmint@aol.com
• Re: [femm] Ferrite cores
  • From: awohlberg <awohlberg@monmouth.com>
• Oscillating spherical magnet inside a coil
  • From: "Reid Wender" <rwender@quvis.com>
• Re: [femm] ironloss.pdf
  • From: "dragospopa" <dragospopa@pcnet.ro>
• Magnetic composite
  • From: "dfj_stevenson" <Douglas@magtech.co.uk>
• Re: [femm] Magnetic composite
  • From: Goga Cvetkovski <gogacvet@yahoo.co.uk>
• Re: [femm] Magnetic composite
  • From: David Meeker <dmeeker@ieee.org>
• Force Calculus Methods
  • From: "laurent_vp_fr" <laurent_vp@orange.fr>
• Current
  • From: "brian_hawes" <b.hawes1@physics.ox.ac.uk>
• Re: [femm] Current
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: [femm] Force Calculus Methods
  • From: Robert Strand <rstrand@ihug.com.au>
• Re: Force Calculus Methods
  • From: "rob_strandau" <rstrand@ihug.com.au>
• Re: Current
  • From: "brian_hawes" <b.hawes1@physics.ox.ac.uk>
• torque
  • From: mohamed karakache <mkarakdz@yahoo.fr>
• Re: [femm] Re: Current
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Re: Current
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: [femm] Re: Current
  • From: David Meeker <dmeeker@ieee.org>
• Force using LUA
  • From: Giancarlo Cordeiro da Costa <gian@coc.ufrj.br>
• RE: How to use "Copy as Metafile"
  • From: "wupatrick0124" <jingjoy@ms56.hinet.net>
• Re: [femm] Re: Current
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Induction Machine in FEMM
  • From: Lindolfo Marra <lindolfomcneto@yahoo.com.br>
• Define contour
  • From: "Roman Beresik" <beresikr@valm.sk>
• Re: [femm] ironloss.pdf
  • From: 吳 煥文 <wupatrick9785@yahoo.com.tw>
• RE: [femm] Define contour
  • From: Finlay Evans <finlay.evans@renishaw.com>
• RE: Find "silicon core iron" material
  • From: "wupatrick0124" <jingjoy@ms56.hinet.net>
• Re: [femm] RE: Find "silicon core iron" material
  • From: David Meeker <dmeeker@ieee.org>
• Re: Find "silicon core iron" material
  • From: "wupatrick0124" <jingjoy@ms56.hinet.net>
• Re: [femm] RE: Find "silicon core iron" material
  • From: Xia Chen <xchen4@umbc.edu>
• RE: Find material for shield!
  • From: Patrick[吳煥文高專] <patrick@more.com.tw>
• Re: [femm] RE: Find "silicon core iron" material
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] RE: Find "silicon core iron" material
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• RE: Find material for shield! RESEND
  • From: Patrick[吳煥文高專] <patrick@more.com.tw>
• hello and thanks
  • From: "junguswang" <junguswang@yahoo.com>
• SPS-Motor Analyse and first welcome
  • From: "dieter_wuertenberger" <dieter_wuertenberger@yahoo.com>
• Power Losses
  • From: "brian_hawes" <b.hawes1@physics.ox.ac.uk>
• RE: [femm] Power Losses
  • From: "Lovrenc Gasparin" <lovrencg@email.si>
• Re: [femm] Power Losses
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Re: Current
  • From: "Israel Kehaty" <tsiporak@hotmail.com>
• Power
  • From: "brian_hawes" <b.hawes1@physics.ox.ac.uk>
• Re: [femm] Re: Current
  • From: David Meeker <dmeeker@ieee.org>
• Calculation of force
  • From: "Roman Beresik" <beresikr@valm.sk>
• saturable reactor
  • From: Vichman Ephim <vichman@netvision.net.il>
• Re: [femm] Calculation of force
  • From: agnaldo@if.ufrj.br
• Re: [femm] Calculation of force
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Calculation of force
  • From: David Meeker <dmeeker@ieee.org>
• Force Calculation fix / other mods
  • From: David Meeker <dmeeker@ieee.org>
• Licence for 3D project??
  • From: "isbaker007" <isbaker@bigpond.com>
• Re: [femm] Licence for 3D project??
  • From: jim <jim@weathercom.com>
• Re: [femm] Licence for 3D project??
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Force Calculation fix / other mods
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• instantaneous torque
  • From: mohamed karakache <mkarakdz@yahoo.fr>
• Re: [femm] Force Calculation fix / other mods
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Help me to learn FEM
  • From: balakrishna@www.svce.ac.in
• Solenoid Question
  • From: "xeno_tropic" <xeno_tropic@yahoo.com>
• Re: [femm] Solenoid Question
  • From: "James Stephenson" <j.stephen@attbi.com>
• Re: Solenoid Question
  • From: "xeno_tropic" <xeno_tropic@yahoo.com>
• Re: saturable reactor
  • From: David Meeker <dmeeker@ieee.org>
• Speaker with coil model?
  • From: "ttelesky" <ttelesky@compuserve.com>
• Current orientation ?
  • From: "marsupiofr" <marsupio@hotmail.com>
• Bug with showdensity, hidepoints and windowhide ?
  • From: "marsupiofr" <marsupio@hotmail.com>
• New issues
  • From: "marsupiofr" <marsupio@hotmail.com>
• [no subject]
  • From: "marsupiofr" <marsupio@hotmail.com>
• Re: [femm] Bug with showdensity, hidepoints and windowhide ?
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Current orientation ?
  • From: David Meeker <dmeeker@ieee.org>
• jiles-atherton model
  • From: "Willem-Jan Ouborg" <ouborg@ucla.edu>
• Transient solver with Histeresis.
  • From: Sebastià <sje@tinet.org>
• Choice of ferromagnetic material ?
  • From: "marsupiofr" <marsupio@hotmail.com>
• More materials for the library?
  • From: "Roger L" <rogerlov@ix.netcom.com>
• femm
  • From: "dragospopa" <dragospopa@pcnet.ro>
• Re: Speaker with coil model?
  • From: "mvalca" <mvalca@yahoo.com>
• SINGLE PHASE INDUCTION MOTOR
  • From: "kastury_rn" <kastury_rn@yahoo.co.uk>
• Flux distribution in an induction motor
  • From: "Jabulani Bembe" <Jabulani.Bembe@eskom.co.za>
• RE: [femm] Flux distribution in an induction motor
  • From: "Martin, Dick" <dick@imtmems.com>
• Re: [femm] Flux distribution in an induction motor
  • From: Dave Squires <djsquires@plix.com>
• Re: [femm] Re: Speaker with coil model?
  • From: David Meeker <dmeeker@ieee.org>
• Still Looking - Ferrites and Library info
  • From: "Roger L" <rogerlov@ix.netcom.com>
• AC & DC field question
  • From: "alanbabb" <alan@babbspeakers.com>
• Re: Speaker with coil model?
  • From: "alanbabb" <alan@babbspeakers.com>
• message box
  • From: "mvalca" <mvalca@yahoo.com>
• End turns and end ring leakage inductances in machines ?
  • From: "marsupiofr" <marsupio@hotmail.com>
• Re: message box
  • From: "David Meeker" <dcm3c@earthlink.net>
• Re: Speaker with coil model?
  • From: "David Meeker" <dcm3c@earthlink.net>
• Re: AC & DC field question
  • From: "David Meeker" <dcm3c@earthlink.net>
• Re: message box
  • From: "marsupiofr" <marsupio@hotmail.com>
• LUA NODE and SEGMENT EDIT
  • From: "<Joao Paulo Sinnecker>" <jps@if.ufrj.br>
• Re: LUA NODE and SEGMENT EDIT
  • From: "David Meeker" <dcm3c@earthlink.net>
• Re: [femm] Re: LUA NODE and SEGMENT EDIT
  • From: "<Joao Paulo Sinnecker>" <jps@if.ufrj.br>
• Determining inductance per meter with 2D analyses
  • From: "gopherlid" <macy@california.com>
• Triangle - automatic mesh generation
  • From: "gopherlid" <macy@california.com>
• Re: [femm] Triangle - automatic mesh generation
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Determining inductance per meter with 2D analyses
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Triangle - automatic mesh generation
  • From: "Robert Macy" <macy@california.com>
• Re: [femm] Determining inductance per meter with 2D analyses
  • From: "Robert Macy" <macy@california.com>
• Induction Motor in FEMM
  • From: Lindolfo Marra <lindolfomcneto@yahoo.com.br>
• Where did I make the mistake?
  • From: Tsarafidy RAMINOSOA <tsarafidy@yahoo.fr>
• RE: [femm] Induction Motor in FEMM
  • From: Lovrenc Gasparin <lovrencg@email.si>
• Re: [femm] Where did I make the mistake?
  • From: hans.krieg@transport.alstom.com
• Re: [femm] Where did I make the mistake?
  • From: Tsarafidy RAMINOSOA <tsarafidy@yahoo.fr>
• RE: [femm] Where did I make the mistake?
  • From: "John D. Ayer" <john_d_ayer@yahoo.com>
• Re: Induction Motor in FEMM
  • From: "kbranbg" <kbran@vmei.acad.bg>
• RE: [femm] Where did I make the mistake?
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• RE: [femm] Where did I make the mistake?
  • From: "John D. Ayer" <john_d_ayer@yahoo.com>
• RE: [femm] Where did I make the mistake?
  • From: Tsarafidy RAMINOSOA <tsarafidy@yahoo.fr>
• RE: [femm] Re: Induction Motor in FEMM
  • From: Lovrenc Gasparin <lovrencg@email.si>
• electrical arc
  • From: "jncasteg" <jncasteg@yahoo.es>
• RE: [femm] Induction Motor in FEMM
  • From: mohamed karakache <mkarakdz@yahoo.fr>
• RE: [femm] Induction Motor in FEMM
  • From: mohamed karakache <mkarakdz@yahoo.fr>
• RE: [femm] Induction Motor in FEMM
  • From: "Jabulani Bembe" <Jabulani.Bembe@eskom.co.za>
• RE: [femm] Induction Motor in FEMM
  • From: mohamed karakache <mkarakdz@yahoo.fr>
• RE: [femm] Induction Motor in FEMM
  • From: "Lovrenc Gasparin" <lovrencg@email.si>
• RE: [femm] Induction Motor in FEMM
  • From: mohamed karakache <mkarakdz@yahoo.fr>
• RE: [femm] Induction Motor in FEMM
  • From: "Lovrenc Gasparin" <lovrencg@email.si>
• Memory Leak?
  • From: "guyhm2002" <guyhm@hotmail.com>
• RE: [femm] Memory Leak?
  • From: Finlay Evans <finlay.evans@renishaw.com>
• Re: [femm] Memory Leak?
  • From: GDS <gds@gds-sistemas.com>
• Re: Memory Leak?
  • From: "David Meeker" <dcm3c@earthlink.net>
• permanent magnets?
  • From: "masteringmatlab" <masteringmatlab@yahoo.com>
• Re: [femm] permanent magnets?
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] permanent magnets?
  • From: Jiri Vecerka <vecerkaj@yahoo.com>
• permenent magnet synchronous machine
  • From: mohamed karakache <mkarakdz@yahoo.fr>
• Re: Induction Motor in FEMM
  • From: "David Meeker" <dcm3c@earthlink.net>
• Re: Induction Motor in FEMM
  • From: "marsupiofr" <marsupio@hotmail.com>
• Re: [femm] Re: Induction Motor in FEMM
  • From: "Prof. Jose Roberto Camacho" <jrcamacho@ufu.br>
• Re: [femm] Re: Induction Motor in FEMM
  • From: David Meeker <dmeeker@ieee.org>
• [no subject]
  • From: bhaskar bollapragada <bhaskar15656@yahoo.co.uk>
• Re: [femm] variable inductance motor
  • From: David Meeker <dmeeker@ieee.org>
• permanent magnet synchronous machine
  • From: karakache mohamed <karakache77@yahoo.com>
• Forces on a small diamagnetic sphere in an AC/DC field
  • From: "nortonsm" <nortonsm@yahoo.com>
• Re: [femm] Forces on a small diamagnetic sphere in an AC/DC field
  • From: David Meeker <dmeeker@ieee.org>
• Temperature dependence of PM materials
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Temperature dependence of PM materials
  • From: marctt2@aol.com
• Re: Forces on a small diamagnetic sphere in an AC/DC field
  • From: "nortonsm" <nortonsm@yahoo.com>
• magnetic materials
  • From: Jordi-Roger Riba <jordi@euetii.upc.es>
• Re: Temperature dependence of PM materials
  • From: "fj_emtc" <fije29@sol.dk>
• RE: [femm] Temperature dependence of PM materials
  • From: "Gal Janos" <jgal@hunelec.hu>
• Re: Forces on a small diamagnetic sphere in an AC/DC field
  • From: David Meeker <dmeeker@ieee.org>
• RE: [femm] magnetic materials
  • From: "Martin, Dick" <dick@imtmems.com>
• RE: [femm] Temperature dependence of PM materials
  • From: "kirk" <kirk@3rivers.net>
• Re: Temperature dependence of PM materials
  • From: "David Meeker" <dcm3c@earthlink.net>
• Re: [femm] Re: Temperature dependence of PM materials
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• RE: [femm] Temperature dependence of PM materials
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• RE: [femm] Re: Temperature dependence of PM materials
  • From: Finlay Evans <finlay.evans@renishaw.com>
• Re: Temperature dependence of PM materials
  • From: "fj_emtc" <fije29@sol.dk>
• Re: [femm] Re: Temperature dependence of PM materials
  • From: hans.krieg@transport.alstom.com
• Re: [femm] Re: Temperature dependence of PM materials
  • From: David Meeker <dmeeker@ieee.org>
• Re: Temperature dependence of PM materials
  • From: "David Meeker" <dcm3c@earthlink.net>
• Re: Forces on a small diamagnetic sphere in an AC/DC field
  • From: "nortonsm" <nortonsm@yahoo.com>
• Inductance Calculation
  • From: "fchao" <fchao72@yahoo.com.tw>
• Re: [femm] Re: Forces on a small diamagnetic sphere in an AC/DC field
  • From: David Meeker <dmeeker@ieee.org>
• programming language lua
  • From: mohamed karakache <mkarakdz@yahoo.fr>
• Dave Meekers Induction Motor in FEMM example: a question
  • From: "Douglas Stevenson" <Douglas@magtech.co.uk>
• slip in induction machines question
  • From: karakache mohamed <karakachemohamed@yahoo.com>
• h.t integrals around a closed loop
  • From: "cambo24680" <cambo24680@yahoo.co.uk>
• Induction excitation current
  • From: "Jabulani Bembe" <Jabulani.Bembe@eskom.co.za>
• Re: programming language lua
  • From: "David Meeker" <dcm3c@earthlink.net>
• RE: [femm] Re: Temperature dependence of PM materials
  • From: "dragospopa" <dragospopa@pcnet.ro>
• RE: [femm] Temperature dependence of PM materials
  • From: "dragospopa" <dragospopa@pcnet.ro>
• RE: [femm] Temperature dependence of PM materials
  • From: "kirk" <kirk@3rivers.net>
• 3D programs [was Re: Temperature dependence of PM materials]
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] h.t integrals around a closed loop
  • From: David Meeker <dmeeker@ieee.org>
• Re: various induction machine questions
  • From: David Meeker <dmeeker@ieee.org>
• proper inductance and mutuel inductance for electric machinery question
  • From: mohamed karakache <mkarakdz@yahoo.fr>
• permanent magnet synchronuos machine with femm
  • From: mohamed karakache <mkarakdz@yahoo.fr>
• continuum model of proximity losses (was Re: various induction machine questions)
  • From: David Meeker <dmeeker@ieee.org>
• some questions with lua
  • From: smaïl mezani <s_mezani@yahoo.fr>
• reducing residual magnetism
  • From: Shaun.Onverwacht@ziton.spx.com
• Re: [femm] permanent magnet synchronuos machine with femm
  • From: David Meeker <dmeeker@ieee.org>
• lua script
  • From: mohamed karakache <mkarakdz@yahoo.fr>
• Re: [femm] permanent magnet synchronuos machine with femm
  • From: mohamed karakache <mkarakdz@yahoo.fr>
• Re: [femm] permanent magnet synchronuos machine with femm
  • From: mohamed karakache <mkarakdz@yahoo.fr>
• Re: [femm] some questions with lua
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: [femm] lua script
  • From: David Meeker <dmeeker@ieee.org>
• DXF Import
  • From: "kdjacobs86" <kdjacobs@fuse.net>
• Re: message box
  • From: "davehyre" <davehyre@yahoo.com>
• Re: [femm] DXF Import
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] continuum model of proximity losses (was Re: various induction machine questions)
  • From: Muchlis Achmad <machmad@yahoo.com>
• BH data
  • From: "HUTCHINGS Michael" <mhutchings@solartronmetrology.com>
• Re: [femm] continuum model of proximity losses (was Re: various induction machine questions)
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Re: message box
  • From: David Meeker <dmeeker@ieee.org>
• questions about the post-processor
  • From: smaïl mezani <s_mezani@yahoo.fr>
• permanent magnet sychronous machine
  • From: Mohamed Karakache <mkarakdz@yahoo.fr>
• Re: BH data
  • From: "David Meeker" <dcm3c@earthlink.net>
• Re: [femm] BH data
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: BH data
  • From: "mikejhutch" <mhutchings@solartronmetrology.com>
• Re: BH data
  • From: "mikejhutch" <mhutchings@solartronmetrology.com>
• [femm] Re: BH data
  • From: "Chris Holt" <chris.c.holt@aeat.co.uk>
• Re: [femm] Re: BH data
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Animation Software
  • From: "Jiri Vecerka" <vecerkaj@yahoo.com>
• RE: [femm] Animation Software
  • From: "Daniel Mattsson-Boze" <dan@pianodisc.com>
• Re: [femm] Animation Software
  • From: GDS <gds@dd.com.ar>
• Re: [femm] Animation Software
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: BH data
  • From: "mikejhutch" <mhutchings@solartronmetrology.com>
• Re: BH data
  • From: "mikejhutch" <mhutchings@solartronmetrology.com>
• Direction of Magnetization, Other Flux patterns
  • From: "davet82000" <dtwyman@hotmail.com>
• [femm] Colours
  • From: "TMax" <trovamax@inwind.it>
• Re: [femm] Colours & questions about the post-processor
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Re: BH data
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: [femm] Animation Software
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: [femm] Animation Software
  • From: Dave Squires <djsquires@plix.com>
• Re: [femm] Re: BH data
  • From: Muchlis Achmad <machmad@yahoo.com>
• RE: [femm] Animation Software
  • From: "John D. Ayer" <john_d_ayer@yahoo.com>
• RE: [femm] Animation Software
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: [femm] Re: BH data
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: [femm] Direction of Magnetization, Other Flux patterns
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Animation Software
  • From: Jiri Vecerka <vecerkaj@yahoo.com>
• Re: Colours & questions about the post-processor
  • From: "henkwensink" <henkwensink@hotmail.com>
• Re: [femm] Re: Colours & questions about the post-processor
  • From: David Meeker <dmeeker@ieee.org>
• What's the "In" used for?
  • From: "ephjyin" <ephjyin@yahoo.com>
• Re: [femm] What's the "In" used for?
  • From: Jiri Vecerka <vecerkaj@yahoo.com>
• OFELI. Object Finite Element Library.
  • From: Sebastià <sje@tinet.org>
• Bobin (L,R) calculation
  • From: "jire602000" <jire@club-internet.fr>
• resistive losses and Lubarsky
  • From: "Henk Wensink" <h.wensink@el.utwente.nl>
• Re: [femm] Bobin (L,R) calculation
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] resistive losses and Lubarsky
  • From: David Meeker <dmeeker@ieee.org>
• force calculation doubt
  • From: "shazanaz2000" <smartmicro@hotmail.com>
• Re: Bobin (L,R) calculation
  • From: "jire602000" <jire@club-internet.fr>
• Re: [femm] force calculation doubt
  • From: "Prem Kumar C" <prem@bhelrnd.co.in>
• Nov 10 Release
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Nov 10 Release
  • From: "Prof. Jose Roberto Camacho" <jrcamacho@ufu.br>
• Re: [femm] Nov 10 Release
  • From: "Gregory R. Quinting" <gregq@iei.net>
• standard steel material figures at 25khrz
  • From: "jire602000" <jire@club-internet.fr>
• continuous looping in fkern
  • From: "shazanaz2000" <smartmicro@hotmail.com>
• [femm] FEMM Vs. commercial code
  • From: "TMax" <trovamax@inwind.it>
• Re: continuous looping in fkern
  • From: "David Meeker" <dcm3c@earthlink.net>
• Re: [femm] Nov 10 Release
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Re: Bobin (L,R) calculation
  • From: David Meeker <dmeeker@ieee.org>
• Re: FEMM Vs. commercial code
  • From: "jire602000" <jire@club-internet.fr>
• where to find full BH curve of NdFeB magnetic material
  • From: "shazanaz2000" <smartmicro@hotmail.com>
• Re: [femm] FEMM Vs. commercial code
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• RE: [femm] where to find full BH curve of NdFeB magnetic material
  • From: "Gal Janos" <jgal@hunelec.hu>
• Re: [femm] where to find full BH curve of NdFeB magnetic material
  • From: Gabriele Bellussi <bellussi@katamail.com>
• Re: FEMM Vs. commercial code
  • From: "marsupiofr" <marsupio@hotmail.com>
• Re: [femm] FEMM Vs. commercial code
  • From: David Meeker <dmeeker@ieee.org>
• Re: FEMM Vs. commercial code
  • From: "Prem Kumar C" <prem@bhelrnd.co.in>
• Re: FEMM Vs. commercial code
  • From: "marsupiofr" <marsupio@hotmail.com>
• Re: [femm] where to find full BH curve of NdFeB magnetic material
  • From: Jiri Vecerka <vecerkaj@yahoo.com>
• Re: [femm] Re: FEMM Vs. commercial code
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Rif: [femm] where to find full BH curve of NdFeB magnetic material
  • From: giovanni.bortolan@sogagroup.com
• Re: FEMM Vs. commercial code
  • From: "marsupiofr" <marsupio@hotmail.com>
• RE: [femm] FEMM Vs. commercial code
  • From: "Martin, Dick" <dick@imtmems.com>
• New FEMM user
  • From: "eavogels" <eric.vogels@telia.com>
• Re: [femm] New FEMM user
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] New FEMM user
  • From: "Eric Vogels" <eric.vogels@telia.com>
• Self and mutual inductances of coupled microstrip lines in RF frequency range
  • From: "Sergey Somov" <sersom84@hotmail.com>
• Export X-Y field plot?
  • From: "ttelesky" <ttelesky@compuserve.com>
• New beginner at FEMM
  • From: "xfabius2001" <fmilanesi@tin.it>
• Re: [femm] Export X-Y field plot?
  • From: David Meeker <dmeeker@ieee.org>
• RE: [femm] Export X-Y field plot?
  • From: "Guy, James K" <james.k.guy@boeing.com>
• Re: Export X-Y field plot?
  • From: "ttelesky" <ttelesky@compuserve.com>
• Re: Export X-Y field plot?
  • From: "ttelesky" <ttelesky@compuserve.com>
• Re: [femm] Export X-Y field plot?
  • From: David Meeker <dmeeker@ieee.org>
• RE: [femm] Export X-Y field plot?
  • From: "Guy, James K" <james.k.guy@boeing.com>
• Induction motor no load test
  • From: "emsarch" <franco_anzioso@hotmail.com>
• Re: [femm] New FEMM user
  • From: "Eric Vogels" <eric.vogels@telia.com>
• RE: [femm] New FEMM user
  • From: "Guy, James K" <james.k.guy@boeing.com>
• RE: [femm] New FEMM user
  • From: "Guy, James K" <james.k.guy@boeing.com>
• Re: [femm] New FEMM user
  • From: "Eric Vogels" <eric.vogels@telia.com>
• Re: [femm] Self and mutual inductances of coupled microstrip lines in RF frequency range
  • From: David Meeker <dmeeker@ieee.org>
• far B field
  • From: "mvalca" <mvalca@yahoo.com>
• 500kw motor modeling
  • From: "Polychronis Vallianatos" <rotechen@otenet.gr>
• Re: [femm] far B field
  • From: "Robert Macy" <macy@california.com>
• Re: [femm] New FEMM user
  • From: "Eric Vogels" <eric.vogels@telia.com>
• Re: [femm] New FEMM user
  • From: "TMax" <trovamax@inwind.it>
• Re: [femm] Induction motor no load test
  • From: "Prem Kumar C" <prem@bhelrnd.co.in>
• Re: [femm] Induction motor no load test
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: Self and mutual inductances of coupled microstrip lines in RF frequency range
  • From: "Samuel" <sdaylis@hotmail.com>
• Re: [femm] Re: Self and mutual inductances of coupled microstrip lines in RF frequency range
  • From: David Meeker <dmeeker@ieee.org>
• Scripting
  • From: "eavogels" <eric.vogels@telia.com>
• SRM Modeling
  • From: "Pradeepkumar Ashok" <pradeepkumar@mail.utexas.edu>
• How calculate distribution and value of EMF? Date: Sat, 23 Nov 2002 21:15:05 +0100
  • From: "Tulipan" <automat24@poczta.onet.pl>
• Re: [femm] 500kw motor modeling
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Scripting
  • From: "Eric Vogels" <eric.vogels@telia.com>
• Re: [femm] Scripting
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Scripting
  • From: "Eric Vogels" <eric.vogels@telia.com>
• Inductances in electrical transformers
  • From: "Fabius" <xfabius@email.it>
• Re: [femm] Scripting
  • From: "Eric Vogels" <eric.vogels@telia.com>
• Re: [femm] Inductances in electrical transformers
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: [femm] Inductances in electrical transformers
  • From: Fabio <fmilanesi@tin.it>
• Default file location
  • From: "ttelesky" <ttelesky@compuserve.com>
• Re: [femm] Inductances in electrical transformers
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] SRM Modeling
  • From: David Meeker <dmeeker@ieee.org>
• Re: Nov 10 Release
  • From: "guyhm2002" <guyhm@hotmail.com>
• RE: [femm] SRM Modeling
  • From: "Pradeepkumar Ashok" <pradeepkumar@mail.utexas.edu>
• Re: [femm] Inductances in electrical transformers
  • From: "Fabio" <fmilanesi@tin.it>
• Re: [femm] Re: Nov 10 Release
  • From: "Eric Vogels" <eric.vogels@telia.com>
• Problem with DXF import from Autocad R14
  • From: "stefannilsson2003" <stefan.a.nilsson@metso.com>
• Re: Nov 10 Release
  • From: "guyhm2002" <guyhm@hotmail.com>
• Re: [femm] Re: Nov 10 Release
  • From: David Meeker <dmeeker@ieee.org>
• LUA something like runpre
  • From: "Olaf Petzold" <opetzold@wit.regiocom.net>
• Re: [femm] LUA something like runpre
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Default file location
  • From: David Meeker <dmeeker@ieee.org>
• Re: Self and mutual inductances of coupled microstrip lines in RF frequency range
  • From: "Samuel" <sdaylis@hotmail.com>
• Re: [femm] Re: Self and mutual inductances of coupled microstrip lines in RF frequency range
  • From: David Meeker <dmeeker@ieee.org>
• "nonlinear time harmonic" solver again.
  • From: David Meeker <dmeeker@ieee.org>
• Bug in move function
  • From: giovanni.bortolan@sogagroup.com
• periodic boundary condition problem
  • From: "Penquista66" <jtapia@die.udec.cl>
• Re: [femm] periodic boundary condition problem
  • From: enp enp <riyad20012002@yahoo.fr>
• Re: periodic boundary condition problem
  • From: "Penquista66" <jtapia@die.udec.cl>
• Re: [femm] periodic boundary condition problem
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] periodic boundary condition problem
  • From: Jiri Vecerka <vecerkaj@yahoo.com>
• RE: [femm] periodic boundary condition problem
  • From: "Juan Tapia" <jtapia@die.udec.cl>
• Re: [femm] Bug in move function
  • From: "Prem Kumar C" <prem@bhelrnd.co.in>
• Bearing currents and faraday cage
  • From: "Polychronis Vallianatos" <rotechen@otenet.gr>
• Re: Default file location
  • From: "ttelesky <ttelesky@compuserve.com>" <ttelesky@compuserve.com>
• Thermal FEA software?
  • From: "biomed_eng_2000 <biomed_eng_2000@yahoo.com>" <biomed_eng_2000@yahoo.com>
• FEMM now crashing!
  • From: "ttelesky <ttelesky@compuserve.com>" <ttelesky@compuserve.com>
• Re: [femm] FEMM now crashing!
  • From: "Prem Kumar C" <prem@bhelrnd.co.in>
• Re: [femm] FEMM now crashing!
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Bug in move function
  • From: David Meeker <dmeeker@ieee.org>
• Re: FEMM now crashing!
  • From: "ttelesky <ttelesky@compuserve.com>" <ttelesky@compuserve.com>
• Re: FEMM now crashing!
  • From: "ttelesky <ttelesky@compuserve.com>" <ttelesky@compuserve.com>
• Rif: Re: [femm] Bug in move function
  • From: giovanni.bortolan@sogagroup.com
• Re: [femm] Bearing currents and faraday cage
  • From: hans.krieg@transport.alstom.com
• Re: [femm] Bug in move function
  • From: "David Meeker <dcm3c@earthlink.net>" <dcm3c@earthlink.net>
• 'block' and 'group' confussion
  • From: "Penquista66 <jtapia@die.udec.cl>" <jtapia@die.udec.cl>
• Lua command for select segments over a region.
  • From: "Prem Kumar C" <prem@bhelrnd.co.in>
• Re: [femm] 'block' and 'group' confussion
  • From: Jiri Vecerka <vecerkaj@yahoo.com>
• Re: [femm] Lua command for select segments over a region.
  • From: Jiri Vecerka <vecerkaj@yahoo.com>
• Re: [femm] 'block' and 'group' confussion
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Tetgen
  • From: "Robin Cornelius" <robin.cornelius@hirst-magnetics.com>
• Re: [femm] Tetgen
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• RE: [femm] Tetgen
  • From: "Robin Cornelius" <robin.cornelius@hirst-magnetics.com>
• RE: [femm] 'block' and 'group' confussion
  • From: "Juan Tapia" <jtapia@die.udec.cl>
• some wished improvments in preprocessor
  • From: giovanni.bortolan@sogagroup.com
• deadlock because of WaitForSingleObject
  • From: "joesixpaq <joesixpaq@ngs.ru>" <joesixpaq@ngs.ru>
• permanent magnet in axysimmetric units
  • From: ftr.xsoler@ficosa.com
• [no subject]
  • From: "mvalca <mvalca@yahoo.com>" <mvalca@yahoo.com>
• Call to triangle unsucessful after import of DXF
  • From: "stefannilsson2003 <stefan.a.nilsson@metso.com>" <stefan.a.nilsson@metso.com>
• How to get the leakage inductance when very bad coupling.
  • From: "jire602000 <jire602000@yahoo.com>" <jire602000@yahoo.com>
• General question and/or proposition for the circuit property and global variable
  • From: "jire602000 <jire602000@yahoo.com>" <jire602000@yahoo.com>
• Re: [femm] deadlock because of WaitForSingleObject
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Call to triangle unsucessful after import of DXF
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] General question and/or proposition for the circuit property and global variable
  • From: "Prem Kumar C" <prem@bhelrnd.co.in>
• Re: [femm] General question and/or proposition for the circuit property and global variable
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: [femm] Call to triangle unsucessful after import of DXF
  • From: "Eric Vogels" <eric.vogels@telia.com>
• Femm releases 3.3 - 3.2
  • From: "ac090960 <ac090960@yahoo.it>" <ac090960@yahoo.it>
• Re: [femm] Femm releases 3.3 - 3.2
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Femm releases 3.3 - 3.2
  • From: arnoldo campi <ac090960@yahoo.it>
• winding current setting
  • From: "Penquista66 <jtapia@die.udec.cl>" <jtapia@die.udec.cl>
• convergence problem
  • From: "Juan Tapia" <jtapia@die.udec.cl>
• Re: [femm] winding current setting
  • From: "Prem Kumar C" <prem@bhelrnd.co.in>
• Re: [femm] convergence problem
  • From: "Prem Kumar C" <prem@bhelrnd.co.in>
• beginner
  • From: Sébastien Cadeau-Belliard <scbelliard@yahoo.fr>
• Re: [femm] beginner
  • From: "Paulo Pereirinha" <ppereiri@isr.uc.pt>
• Re: [femm] beginner
  • From: "Alexandre Carvalho" <carvalhoamc@yahoo.com.br>
• Re: [femm] beginner
  • From: David Meeker <dmeeker@ieee.org>
• Merry Christmas and Happy New Year for every FEMM user
  • From: "Gal Janos" <jgal@hunelec.hu>
• Horse shoe magnet
  • From: "eavogels <eric.vogels@telia.com>" <eric.vogels@telia.com>
• Re: [femm] Horse shoe magnet
  • From: Robert Strand <rstrand@ihug.com.au>
• Re: [femm] Merry Christmas and Happy New Year for every FEMM user
  • From: Robert Strand <rstrand@ihug.com.au>
• [no subject]
  • From: "Penquista66 <jtapia@die.udec.cl>" <jtapia@die.udec.cl>
• Re: [femm] Horse shoe magnet
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Horse shoe magnet
  • From: "Eric Vogels" <eric.vogels@telia.com>
• HELP HELP PLEASE!!!
  • From: "ttavus <ttavus@yahoo.com>" <ttavus@yahoo.com>
• How to simulate a short circuit on a few turns to get the leakage inductance when very bad coupling.
  • From: john fox <jire602000@yahoo.com>
• Re: [femm] How to simulate a short circuit on a few turns to get the leakage inductance when very bad coupling.
  • From: Santiago Salamanca <santiago@salamanca.de>
• Re: [femm] How to simulate a short circuit on a few turns to get the leakage inductance when very bad coupling.
  • From: David Meeker <dmeeker@ieee.org>
• Lua & external DOS executable applications
  • From: "ac090960 <ac090960@yahoo.it>" <ac090960@yahoo.it>
• Re: How to simulate a short circuit on a few turns to get the leakage inductance when very bad coupling.
  • From: "jire602000 <jire602000@yahoo.com>" <jire602000@yahoo.com>
• Re: [femm] Lua & external DOS executable applications
  • From: "Eric Vogels" <eric.vogels@telia.com>
• Re: Lua & external DOS executable applications
  • From: "David Meeker <dcm3c@earthlink.net>" <dcm3c@earthlink.net>
• Revised development version
  • From: David Meeker <dmeeker@ieee.org>
• LUA bugs
  • From: Dave Squires <djsquires@plix.com>
• How to get the leakage inductance when very bad coupling and litz wires.
  • From: john fox <jire602000@yahoo.com>
• Re: [femm] How to get the leakage inductance when very bad coupling and litz wires.
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] How to get the leakage inductance when very bad coupling and litz wires.
  • From: David Meeker <dmeeker@ieee.org>
• Problem with FEMM
  • From: "zifera <emiliano.menghi@inwind.it>" <emiliano.menghi@inwind.it>
• Re: Problem with FEMM
  • From: "David Meeker <dcm3c@earthlink.net>" <dcm3c@earthlink.net>
• autosave
  • From: "Nev Ryan" <nryan@papl.co.uk>
• Re: Problem with FEMM
  • From: "emiliano.menghi@inwind.it" <emiliano.menghi@inwind.it>
• Re: autosave
  • From: "David Meeker <dcm3c@earthlink.net>" <dcm3c@earthlink.net>
• Re: [femm] autosave
  • From: Dave Squires <djsquires@plix.com>
• Alnico 8 relative permeability
  • From: "sloothrog <salvarsan@std.com>" <salvarsan@std.com>
• Re: [femm] Alnico 8 relative permeability
  • From: David Meeker <dmeeker@ieee.org>
• How is 5 Tesla possible?
  • From: "Robert Macy" <macy@california.com>
• Re: [femm] How is 5 Tesla possible?
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: [femm] How is 5 Tesla possible?
  • From: "Robert Macy" <macy@california.com>
• RE: [femm] How is 5 Tesla possible?
  • From: "Gal Janos" <jgal@hunelec.hu>
• Re: [femm] How is 5 Tesla possible?
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] How is 5 Tesla possible?
  • From: Dave Squires <djsquires@plix.com>
• Re: [femm] How is 5 Tesla possible?
  • From: "Robert Macy" <macy@california.com>
• Re: [femm] How is 5 Tesla possible?
  • From: tg.gupta@tbg.tvse.co.in
• OOT - Parallel FEM Language
  • From: Tjatur K <tjatur_k@yahoo.com>
• [no subject]
  • From: "Aditya Mulmule" <smakngp@nagpur.dot.net.in>
• Re: How is 5 Tesla possible?
  • From: "David Meeker <dmeeker@ieee.org>" <dmeeker@ieee.org>
• Re: [femm] Electro-magnetic bearing
  • From: David Meeker <dmeeker@ieee.org>
• Need BH curve for chromium steel
  • From: "skirkendall1 <skirkendall@rostra.com>" <skirkendall@rostra.com>
• How to do a B or H "black box" generator in a perpendicular plan to the working
  • From: "jire602000 <jire602000@yahoo.com>" <jire602000@yahoo.com>
• Re: [femm] Need BH curve for chromium steel
  • From: David Meeker <dmeeker@ieee.org>
• RE: [femm] Need BH curve for chromium steel
  • From: "John D. Ayer" <john_d_ayer@yahoo.com>
• Comparing inductance predictions: femm vs standard formula
  • From: "Robert Macy" <macy@california.com>
• Re: [femm] Comparing inductance predictions: femm vs standard formula
  • From: David Meeker <dmeeker@ieee.org>
• Inductance variation with rotor position in permanent magnet machine
  • From: "raymondong66 <raymond.ong@myprimus.com>" <raymond.ong@myprimus.com>
• electric filed intensity visualization
  • From: "indiana_andy <andy@azboss.net>" <andy@azboss.net>
• Select nodes and blocks together
  • From: "Eric <eric.vogels@telia.com>" <eric.vogels@telia.com>
• Re: [femm] Select nodes and blocks together
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Select nodes and blocks together
  • From: "Eric Vogels" <eric.vogels@telia.com>
• Re: [femm] Comparing inductance predictions: femm vs standard formula
  • From: "Robert Macy" <macy@california.com>
• Re: [femm] Select nodes and blocks together
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• RE: [femm] Inductance variation with rotor position in permanent magnet machine
  • From: "ramon bargallo" <Ramon.Bargallo@upc.es>
• RE: [femm] Need BH curve for chromium steel
  • From: "Kirkendall, Scott" <skirkendall@rostra.com>
• Re: [femm] How to do a B or H "black box" generator in a perpendicular plan to the working
  • From: David Meeker <dmeeker@ieee.org>
• Re: OOT - Parallel FEM Language
  • From: David Meeker <dmeeker@ieee.org>
• B(H) curves
  • From: agnaldo@if.ufrj.br
• RE: [femm] B(H) curves
  • From: "JinFang Liu" <jfl@electronenergy.com>
• Rif: [femm] B(H) curves
  • From: giovanni.bortolan@sogagroup.com
• Re: [femm] B(H) curves
  • From: tg.gupta@tbg.tvse.co.in
• RE: [femm] B(H) curves
  • From: Andrew Myers <andrew@mqimag.co.uk>
• about Mixed boundary condition
  • From: "Jan Zimon" <zimonj@wp.pl>
• Re: [femm] B(H) curves
  • From: "Eric Vogels" <eric.vogels@telia.com>
• [no subject]
  • From: "bhaskar bollapragada" <bhaskar_77@hotmail.com>
• RE: [femm] (unknown)
  • From: Finlay Evans <finlay.evans@renishaw.com>
• Skin effect in a multiconductor system
  • From: ali <aali1831@yahoo.com>
• Me, again!
  • From: agnaldo@if.ufrj.br
• HELP ME
  • From: Giancarlo Cordeiro da Costa <gian@coc.ufrj.br>
• Re: Skin effect in a multiconductor system
  • From: "jire602000 <jire602000@yahoo.com>" <jire602000@yahoo.com>
• magnetisation curves
  • From: "Michael Salloker <michael.salloker@fh-joanneum.at>" <michael.salloker@fh-joanneum.at>
• Re: [femm] magnetisation curves
  • From: "Antonio F.R. Carabio" <ingacarabio@fibertel.com.ar>
• (B,H) curves
  • From: "hedwige_t <hedwigetourmente@hotmail.com>" <hedwigetourmente@hotmail.com>
• coenergy vs. stress tensor calculations of magnetic force
  • From: "James Rabchuk" <ja-rabchuk@wiu.edu>
• Re: [femm] about Mixed boundary condition
  • From: David Meeker <dmeeker@ieee.org>
• Re: OOT - Parallel FEM Language
  • From: Tjatur K <tjatur_k@yahoo.com>
• Non linear Anysotropic analysis
  • From: "brendon2077 <danygenova@libero.it>" <danygenova@libero.it>
• Re: [femm] Non linear Anysotropic analysis
  • From: Dave Squires <djsquires@plix.com>
• Re: [femm] Non linear Anysotropic analysis
  • From: Dave Squires <djsquires@plix.com>
• How to set depth dimension
  • From: "TMax" <trovamax@inwind.it>
• Re: [femm] Non linear Anysotropic analysis
  • From: David Meeker <dmeeker@ieee.org>
• [no subject]
  • From: "James Rabchuk" <jarabchuk@hotmail.com>
• Re: [femm] coenergy vs. stress tensor calculations of magnetic force
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] (unknown)
  • From: David Meeker <dmeeker@ieee.org>
• simple femm, feed back appreciated.
  • From: "John D. Ayer" <john_d_ayer@yahoo.com>
• Re: [femm] How to set depth dimension
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] simple femm, feed back appreciated.
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• RE: [femm] simple femm, feed back appreciated.
  • From: "John D. Ayer" <john_d_ayer@yahoo.com>
• RE: [femm] simple femm, feed back appreciated.
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• number of points in material defintion
  • From: "Michael Salloker <michael.salloker@fh-joanneum.at>" <michael.salloker@fh-joanneum.at>
• Re: srm
  • From: razaq hadi <razaq97@yahoo.com>
• Re: [femm] number of points in material defintion
  • From: Alexandru Andrei <alinixovici@yahoo.co.uk>
• Re: number of points in material defintion
  • From: "David Meeker <dmeeker@ieee.org>" <dmeeker@ieee.org>
• Re: simple femm, feed back appreciated.
  • From: "David Meeker <dmeeker@ieee.org>" <dmeeker@ieee.org>
• Re: [femm] Re: number of points in material defintion
  • From: "Robert Macy" <macy@california.com>
• Re: [femm] Re: number of points in material defintion
  • From: Alexandru Andrei <alinixovici@yahoo.co.uk>
• Re: number of points in material defintion
  • From: "David Meeker <dmeeker@ieee.org>" <dmeeker@ieee.org>
• Synchronous machine
  • From: Diógenes Pereira Gonzaga <diogenes@sel.eesc.usp.br>
• Re: [femm] Re: number of points in material defintion
  • From: "Robert Macy" <macy@california.com>
• Again
  • From: agnaldo@if.ufrj.br
• Triangle call unsuccessful
  • From: "irishmist_ <djtim@worldnet.att.net>" <djtim@worldnet.att.net>
• Re: [femm] Again
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Triangle call unsuccessful
  • From: Jiri Vecerka <vecerkaj@yahoo.com>
• suggestions required
  • From: partho mukherjee <patpro123@yahoo.co.in>
• Re: Triangle call unsuccessful
  • From: "irishmist_ <djtim@worldnet.att.net>" <djtim@worldnet.att.net>
• Re: Triangle call unsuccessful
  • From: "David Meeker <dmeeker@ieee.org>" <dmeeker@ieee.org>
• Synchronous machines.
  • From: Diógenes Pereira Gonzaga <diogenes@sel.eesc.usp.br>
• Re: Triangle call unsuccessful
  • From: "irishmist_ <djtim@worldnet.att.net>" <djtim@worldnet.att.net>
• Re: [femm] Synchronous machines.
  • From: a a <alinixovici@yahoo.co.uk>
• [no subject]
  • From: "l_dennys2000 <l_dennys2000@yahoo.com>" <l_dennys2000@yahoo.com>
• Re: [femm] Ceramic 8
  • From: David Meeker <dmeeker@ieee.org>
• RE: [femm] Ceramic 8
  • From: Mark Smith <mark.smith@linx.co.uk>
• RE: [femm] Ceramic 8
  • From: "Mcguffey, Grant" <jgmcguffey@itwdynatec.com>
• Re: [femm] electric filed intensity visualization
  • From: Joe Riel <joer@k-online.com>
• magnetic composites
  • From: "hedwige_t <hedwigetourmente@hotmail.com>" <hedwigetourmente@hotmail.com>
• parameter's value Date: Mon, 10 Feb 2003 15:14:06 +0100
  • From: "Tulipan" <automat24@poczta.onet.pl>
• Re: [femm] parameter's value
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: magnetic composites
  • From: "jire602000 <jire602000@yahoo.com>" <jire602000@yahoo.com>
• Re: [femm] Re: magnetic composites
  • From: "Hedwige Tourmente" <hedwigetourmente@hotmail.com>
• updated v3.3a3
  • From: David Meeker <dmeeker@ieee.org>
• data extraction using lua
  • From: "sthu111 <sthu111@yahoo.com>" <sthu111@yahoo.com>
• Re: [femm] data extraction using lua
  • From: David Meeker <dmeeker@ieee.org>
• [Help] Meterial - BH Curve data -- STKM13A
  • From: "kimyongchul75 <ychkim@dongjinco.com>" <ychkim@dongjinco.com>
• Plot-X-Y with LUA
  • From: "Naasson Pereira de Alcantara Jr." <naasson@feb.unesp.br>
• Re: [femm] Plot-X-Y with LUA
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Plot-X-Y with LUA
  • From: "Gregory R. Quinting" <gregq@iei.net>
• Re: [femm] Plot-X-Y with LUA
  • From: "Naasson Pereira de Alcantara Jr." <naasson@feb.unesp.br>
• Re: [femm] Plot-X-Y with LUA
  • From: "Naasson Pereira de Alcantara Jr." <naasson@feb.unesp.br>
• Inductance
  • From: "l_dennys2000 <l_dennys2000@yahoo.com>" <l_dennys2000@yahoo.com>
• I like mechanical/magnetic stuff
  • From: C Ouyang <chien_ouyang@yahoo.com>
• Re: Inductance
  • From: "mvalca <mvalca@yahoo.com>" <mvalca@yahoo.com>
• Re: Plot-X-Y with LUA
  • From: "Aakash Jariwala <sthu111@yahoo.com>" <sthu111@yahoo.com>
• multiple results using makeplot
  • From: "alteredfrog <alteredfrog@yahoo.com>" <alteredfrog@yahoo.com>
• Re: [femm] multiple results using makeplot
  • From: David Meeker <dmeeker@ieee.org>
• adding material using lua scripting
  • From: Tsarafidy RAMINOSOA <tsarafidy@yahoo.fr>
• Re: adding material using lua scripting
  • From: "David Meeker <dmeeker@ieee.org>" <dmeeker@ieee.org>
• Re: [femm] Re: adding material using lua scripting
  • From: Tsarafidy RAMINOSOA <tsarafidy@yahoo.fr>
• Femag help
  • From: "Razvan Nicu <diavolu@yahoo.com>" <diavolu@yahoo.com>
• Permanent Magnets
  • From: "hedwige_t <hedwigetourmente@hotmail.com>" <hedwigetourmente@hotmail.com>
• Re: [femm] Femag help
  • From: "Antonio F.R. Carabio" <ingacarabio@fibertel.com.ar>
• Re: [femm] Femag help
  • From: "Antonio F.R. Carabio" <ingacarabio@fibertel.com.ar>
• Re: [femm] Permanent Magnets
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• visibility of variables within femm lua console and femmview lua console
  • From: Tsarafidy RAMINOSOA <tsarafidy@yahoo.fr>
• Re: visibility of variables within femm lua console and femmview lua console
  • From: "David Meeker <dmeeker@ieee.org>" <dmeeker@ieee.org>
• Torque integration
  • From: ito ito <zagabarooo@yahoo.com>
• Tubular linear motor
  • From: "rcsiga <csiga@balu.sch.bme.hu>" <csiga@balu.sch.bme.hu>
• Motion induced eddy currents
  • From: marctt2@aol.com
• Re: [femm] Re: visibility of variables within femm lua console and femmview lua console
  • From: Tsarafidy RAMINOSOA <tsarafidy@yahoo.fr>
• Re: [femm] coenergy vs. stress tensor calculations of magnetic force
  • From: "Ahmet Cansiz" <acansiz@atauni.edu.tr>
• Re: [femm] Motion induced eddy currents
  • From: David Meeker <dmeeker@ieee.org>
• RE: [femm] (Femm 3.3a works!) coenergy vs. stress tensor calculations of magnetic force
  • From: "James Rabchuk" <ja-rabchuk@wiu.edu>
• Fw: FEMAG
  • From: "Antonio F.R. Carabio" <ingacarabio@fibertel.com.ar>
• Re: [femm] (Femm 3.3a works!) coenergy vs. stress tensor calculations of magnetic force
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Torque integration
  • From: David Meeker <dmeeker@ieee.org>
• Jiles-Atherton Model Parameters for Alnico5
  • From: "l_dennys2000 <l_dennys2000@yahoo.com>" <l_dennys2000@yahoo.com>
• Re: [femm] Jiles-Atherton Model Parameters for Alnico5
  • From: "Robert Macy" <macy@california.com>
• Re: [femm] Jiles-Atherton Model Parameters for Alnico5
  • From: "Antonio F.R. Carabio" <ingacarabio@fibertel.com.ar>
• runpost()
  • From: "codeass2003 <pattoj@hotmail.com>" <pattoj@hotmail.com>
• Re: [femm] runpost()
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• [LUA] savefemmfile
  • From: "Tielman Slabbert" <tielman01@telkomsa.net>
• Re: [femm] [LUA] savefemmfile
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] [LUA] savefemmfile
  • From: "Prem Kumar C" <prem@bhelrnd.co.in>
• Re: [femm] runpost()
  • From: "Prem Kumar C" <prem@bhelrnd.co.in>
• Magnetic measuremnt experiment
  • From: "barryn56 <barry@collabrion.com>" <barry@collabrion.com>
• More on experiment
  • From: "barryn56" <barry@collabrion.com>
• Inductance Calculation
  • From: Tsarafidy RAMINOSOA <tsarafidy@yahoo.fr>
• want high-accuracy measurement of force between 2 magnets
  • From: "mikeshonle" <mike@psychonic.net>
• RE: [femm] want high-accuracy measurement of force between 2 magnets
  • From: "James Rabchuk" <ja-rabchuk@wiu.edu>
• [no subject]
  • From: xchen4 <xchen4@umbc.edu>
• Re: [femm]
  • From: "Antonio F.R. Carabio" <ingacarabio@fibertel.com.ar>
• calulation of the magnetic flux
  • From: "Michael Salloker" <michael.salloker@fh-joanneum.at>
• Re: [femm] calulation of the magnetic flux
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Inductance Calculation
  • From: David Meeker <dmeeker@ieee.org>
• savebitmap error
  • From: "bergy50us" <garybergstrom@ameritech.net>
• Hi
  • From: xchen4 <xchen4@umbc.edu>
• discontinuities in stress tensor mask in thin air
  • From: "mikeshonle" <mike@psychonic.net>
• Re: [femm] discontinuities in stress tensor mask in thin air
  • From: "James Rabchuk" <jarabchuk@hotmail.com>
• [no subject]
  • From: Ahmed Ibrahim <a_nashed2001@yahoo.com>
• Re: [femm] discontinuities in stress tensor mask in thin air
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] savebitmap error
  • From: David Meeker <dmeeker@ieee.org>
• Re: Re: discontinuities in stress tensor mask in thin air
  • From: "mikeshonle" <mike@psychonic.net>
• Re: [femm] discontinuities in stress tensor mask in thin air
  • From: David Meeker <dmeeker@ieee.org>
• Re: savebitmap error
  • From: "bergy50us" <forthprgrmr@hotmail.com>
• Re: [femm] Re: savebitmap error
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: savebitmap error
  • From: "bergy50us" <forthprgrmr@hotmail.com>
• non linear stainless steel meterial
  • From: "kimyongchul75" <ychkim@dongjinco.com>
• RE: [femm] non linear stainless steel material
  • From: Mark Smith <mark.smith@linx.co.uk>
• Re: [femm] non linear stainless steel meterial
  • From: "Antonio F.R. Carabio" <ingacarabio@fibertel.com.ar>
• Re: [femm] non linear stainless steel meterial
  • From: "Israel Kehaty" <tsiporak@hotmail.com>
• Inductance formula
  • From: "l_dennys2000" <l_dennys2000@yahoo.com>
• Re: [femm] Inductance formula
  • From: marctt2@aol.com
• Re: [femm] Inductance formula
  • From: "Antonio F.R. Carabio" <ingacarabio@fibertel.com.ar>
• Re: [femm] non linear stainless steel meterial
  • From: 김용철 <ychkim@dongjinco.com>
• Re: discontinuities in stress tensor mask in thin air
  • From: "mikeshonle" <mike@psychonic.net>
• passing a lua script as a command-line argument
  • From: "mikeshonle" <mike@psychonic.net>
• Re: [femm] passing a lua script as a command-line argument
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] non linear stainless steel meterial
  • From: "Israel Kehaty" <tsiporak@hotmail.com>
• Re: [femm] Re: discontinuities in stress tensor mask in thin air
  • From: David Meeker <dmeeker@ieee.org>
• Re: calulation of the magnetic flux
  • From: "Michael Salloker" <michael.salloker@fh-joanneum.at>
• Electrostatics version
  • From: David Meeker <dmeeker@ieee.org>
• Re: calulation of the magnetic flux
  • From: "David Meeker" <dmeeker@ieee.org>
• question about makeplot()
  • From: "physiker11" <webmaster@dccstudios.com>
• Re: [femm] question about makeplot()
  • From: Jiri Vecerka <vecerkaj@yahoo.com>
• Re: calulation of the magnetic flux
  • From: "Michael Salloker" <michael.salloker@fh-joanneum.at>
• Re: [femm] Re: calulation of the magnetic flux
  • From: David Meeker <dmeeker@ieee.org>
• torque calculation example
  • From: "penquista66" <jtapia@die.udec.cl>
• Re: [femm] torque calculation example
  • From: Dave Squires <djsquires@plix.com>
• RE: [femm] torque calculation example
  • From: "Juan Tapia" <jtapia@die.udec.cl>
• Re: [femm] torque calculation example
  • From: Dave Squires <djsquires@plix.com>
• Re: [femm] question about makeplot()
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• RE: [femm] torque calculation example
  • From: "Juan Tapia" <jtapia@die.udec.cl>
• Re: [femm] torque calculation example
  • From: Dave Squires <djsquires@plix.com>
• ring magnet
  • From: "Ahmet Cansiz" <acansiz@atauni.edu.tr>
• Permeance (B/H) Variation vs. Magnet Grade?
  • From: "shanteserve" <shanteserve@yahoo.com>
• Re: [femm] Permeance (B/H) Variation vs. Magnet Grade?
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] ring magnet
  • From: David Meeker <dmeeker@ieee.org>
• hi BEM!!!???
  • From: "Ahmed Abdelfatah" <a_nashed2001@yahoo.com>
• Re: [femm] hi BEM!!!???
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] hi BEM!!!???
  • From: "Antonio F.R. Carabio" <ingacarabio@fibertel.com.ar>
• Re: [femm] hi BEM!!!???
  • From: "Antonio F.R. Carabio" <ingacarabio@fibertel.com.ar>
• RE: [femm] hi BEM!!!???
  • From: "Wellington Koepsel" <wkoepsel@ieee.org>
• RE: [femm] hi BEM!!!???
  • From: Mark Smith <mark.smith@linx.co.uk>
• eddy current brake
  • From: "mvalca" <mvalca@yahoo.com>
• Re: eddy current brake
  • From: "David Meeker" <dmeeker@ieee.org>
• Surface loss on induction motor rotors
  • From: "Gal Janos" <jgal@hunelec.hu>
• need help
  • From: "A. ZAKI" <eng_zima@hotmail.com>
• Re: [femm] need help
  • From: "Antonio F.R. Carabio" <ingacarabio@fibertel.com.ar>
• Motion Induced Eddy Current Simulation
  • From: STEVE ABOAGYE <steve.aboagye@usa.net>
• Magnetic Field Source
  • From: "tano1938" <rgarritano@comcast.net>
• Re: Magnetic Field Source
  • From: "David Meeker" <dmeeker@ieee.org>
• Finite Element Electrostatics Program
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Motion Induced Eddy Current Simulation
  • From: David Meeker <dmeeker@ieee.org>
• Re: Surface loss on induction motor rotors
  • From: David Meeker <dmeeker@ieee.org>
• H,B Vector Plots
  • From: "alesteakira" <aleste2@latinmail.com>
• micrometer size dimensions
  • From: "Boyd Evans" <ev3@ornl.gov>
• RE: [femm] micrometer size dimensions
  • From: "Martin, Dick" <dick@imtmems.com>
• Re: [femm] micrometer size dimensions
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] H,B Vector Plots
  • From: <dmeeker@foster-miller.com>
• Grid alignment in reopened files
  • From: "dartagnan1212" <billfagal@compuserve.com>
• Re: [femm] Grid alignment in reopened files
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: Grid alignment in reopened files
  • From: "dartagnan1212" <billfagal@compuserve.com>
• Re: [femm] Re: Grid alignment in reopened files
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] H,B Vector Plots
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] H,B Vector Plots
  • From: marctt2@aol.com
• Re: [femm] H,B Vector Plots
  • From: Dave Squires <djsquires@plix.com>
• Rotor-bar current in an induction motor
  • From: "Tielman Slabbert" <tielman01@telkomsa.net>
• skin effect in the rotor bars of a squirrel cage induction motor
  • From: "Tielman Slabbert" <tielman01@telkomsa.net>
• RE: [femm] H,B Vector Plots
  • From: "Martin, Dick" <dick@imtmems.com>
• magnetic vector potential
  • From: "tano1938" <rgarritano@comcast.net>
• Re: [femm] skin effect in the rotor bars of a squirrel cage induction motor
  • From: David Meeker <dmeeker@ieee.org>
• Re: H,B Vector Plots
  • From: "alesteakira" <aleste2@latinmail.com>
• Composition of magnetic materials
  • From: "Roman Beresik" <beresikr@valm.sk>
• Direction of Flux
  • From: "tano1938" <rgarritano@comcast.net>
• Re: Direction of Flux
  • From: "David Meeker" <dmeeker@ieee.org>
• BELA electrostatic force calc
  • From: "iaaeinc" <iaaeinc@yahoo.com>
• Re: Magnetic Field Source
  • From: "tano1938" <rgarritano@comcast.net>
• Re: Magnetic Field Source
  • From: "mvalca" <mvalca@yahoo.com>
• zoomier
  • From: Boyd Evans <ev3@ornl.gov>
• Re: [femm] BELA electrostatic force calc
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] BELA electrostatic force calc
  • From: "iaaeinc" <iaaeinc@yahoo.com>
• Re: [femm] Composition of magnetic materials
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] zoomier
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] zoomier
  • From: Dave Squires <djsquires@plix.com>
• Re: [femm] zoomier
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] zoomier
  • From: Dave Squires <djsquires@plix.com>
• Re: 12L14 Case Hardened BH Curve?
  • From: "ds_thompson2003" <thompsds@polysci.com>
• Permanent Magnet Data
  • From: "tano1938" <rgarritano@comcast.net>
• Re: [femm] Permanent Magnet Data
  • From: David Meeker <dmeeker@ieee.org>
• Problem with my very first design
  • From: "tano1938" <rgarritano@comcast.net>
• RE: [femm] Problem with my very first design
  • From: <thompsds@polysci.com>
• Re: [femm] Problem with my very first design
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Re: 12L14 Case Hardened BH Curve?
  • From: "Israel Kehaty" <tsiporak@hotmail.com>
• Re: Problem with my very first design
  • From: "tano1938" <rgarritano@comcast.net>
• Area cross section problem
  • From: "tano1938" <rgarritano@comcast.net>
• Re: [femm] Area cross section problem
  • From: David Meeker <dmeeker@ieee.org>
• Ampere's law
  • From: "tano1938" <rgarritano@comcast.net>
• Re: [femm] Ampere's law
  • From: David Meeker <dmeeker@ieee.org>
• "Free Lunch" for FEMM users
  • From: David Meeker <dmeeker@ieee.org>
• slip frequency....I need help
  • From: "linearmotor77" <linearmotor77@yahoo.co.kr>
• Re: [femm] slip frequency....I need help
  • From: riad kechrpud <r_kechroud@yahoo.fr>
• Vector plots + "zoomier"
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Vector plots + "zoomier"
  • From: Dave Squires <djsquires@plix.com>
• LIM....please help me^^
  • From: "linearmotor77" <linearmotor77@yahoo.co.kr>
• Re: [femm] Vector plots + "zoomier"
  • From: "Eric Vogels" <eric.vogels@telia.com>
• Re: [femm] Vector plots + "zoomier"
  • From: David Meeker <dmeeker@ieee.org>
• Re: much zooomier
  • From: Boyd Evans <ev3@ornl.gov>
• Re: Vector plots + "zoomier"
  • From: "Aakash Jariwala" <sthu111@yahoo.com>
• Re: [femm] Re: Vector plots + "zoomier"
  • From: Dave Squires <djsquires@plix.com>
• Duplicated points
  • From: Dave Squires <djsquires@plix.com>
• Re: Vector plots + "zoomier"
  • From: "David Meeker" <dmeeker@ieee.org>
• Other improvements
  • From: Dave Squires <djsquires@plix.com>
• AC and DC currents in FEMM? Is this possible?
  • From: "daniel_handloser" <daniel_handloser@yahoo.de>
• Problem in lua script with probdef()
  • From: "Robert Macy" <macy@california.com>
• Re: [femm] AC and DC currents in FEMM? Is this possible?
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Problem in lua script with probdef()
  • From: David Meeker <dmeeker@ieee.org>
• Calculating rotor-bar inductance in a SCI motor
  • From: "Tielman Slabbert" <tielman01@telkomsa.net>
• [femm] Calculating rotor-bar inductance in a SCI motor
  • From: riad kechrpud <r_kechroud@yahoo.fr>
• how to increase femm density plot colours
  • From: "ac090960" <ac090960@yahoo.it>
• novice user: on track or not?
  • From: "r_dingo" <rd@labyrinth.net.au>
• Re: how to increase femm density plot colours
  • From: "David Meeker" <dmeeker@ieee.org>
• Re: novice user: on track or not?
  • From: "David Meeker" <dmeeker@ieee.org>
• Re: novice user: on track or not?
  • From: "r_dingo" <rd@labyrinth.net.au>
• Re: [femm] Re: novice user: on track or not?
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Density plot colours and Lua
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: Density plot colours and Lua
  • From: "alesteakira" <aleste2@latinmail.com>
• RE: [femm] Density plot colours and Lua
  • From: Mark Smith <mark.smith@linx.co.uk>
• SRM Inductance plot at constant current
  • From: "Brad Frustaglio" <fuzz@wildrail.net>
• Re: [femm] SRM Inductance plot at constant current
  • From: David Meeker <dmeeker@ieee.org>
• RE: [femm] SRM Inductance plot at constant current
  • From: "Brad Frustaglio" <fuzz@wildrail.net>
• Re: Density plot colours and Lua
  • From: David Meeker <dmeeker@ieee.org>
• RE: [femm] SRM Inductance plot at constant current
  • From: "Brad Frustaglio" <fuzz@wildrail.net>
• RE: [femm] SRM Inductance plot at constant current
  • From: <por@iet.auc.dk>
• passing values between Lua scripts
  • From: "r_dingo" <rd@labyrinth.net.au>
• Lua script
  • From: "Mihai Priboianu" <pribo@amotion.pub.ro>
• TetGen, a 3D tetrahedral mesh generator
  • From: "Si hang" <stsc_sh@sina.com>
• Re: [femm] TetGen, a 3D tetrahedral mesh generator
  • From: "<J.P.Sinnecker>" <jps@if.ufrj.br>
• Re: [femm] passing values between Lua scripts
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Permanent magnet operating point
  • From: "tano1938" <rgarritano@comcast.net>
• Re: [femm] Lua script
  • From: "Tielman Slabbert" <tielman01@telkomsa.net>
• Re: SRM Inductance plot at constant current
  • From: "fj_emtc" <fije29@sol.dk>
• Re: [femm] TetGen, a 3D tetrahedral mesh generator
  • From: agnaldo@if.ufrj.br
• File name
  • From: "Mihai Priboianu" <pribo@amotion.pub.ro>
• Re: Permanent magnet operating point
  • From: "David Meeker" <dmeeker@ieee.org>
• Re: File name
  • From: "David Meeker" <dmeeker@ieee.org>
• Re: [femm] TetGen, a 3D tetrahedral mesh generator
  • From: David Meeker <dmeeker@ieee.org>
• Saving the "meshed" model in FEMM as a *.DXF file
  • From: "israelkk2001" <tsiporak@hotmail.com>
• fkn.exe
  • From: "Eric" <eric.vogels@telia.com>
• Re: [femm] TetGen, a 3D tetrahedral mesh generator
  • From: "<J.P.Sinnecker>" <jps@if.ufrj.br>
• BH curve of steel-37 (?)
  • From: "sclv2003" <s.c.l.vandeven@student.tudelft.nl>
• Re: Saving the "meshed" model in FEMM as a *.DXF file
  • From: "David Meeker" <dmeeker@ieee.org>
• back-emf calculation in dc motor
  • From: "motorist75" <blueingreen75@hotmail.com>
• Problem on DXF Output .
  • From: "acembuselik" <acanakoglu@dumlupinar.edu.tr>
• Re: [femm] Problem on DXF Output .
  • From: "Prof. Jose Roberto Camacho" <jrcamacho@ufu.br>
• Modeling a loudspeaker motor
  • From: "dartagnan1212" <billfagal@compuserve.com>
• Re: [femm] Modeling a loudspeaker motor
  • From: David Meeker <dmeeker@ieee.org>
• Re: Modeling a loudspeaker motor
  • From: "dartagnan1212" <billfagal@compuserve.com>
• Re: [femm] Problem on DXF Output .
  • From: David Meeker <dmeeker@ieee.org>
• Magnetizing Fixture Design - Helllp...:-))
  • From: "tonyrouget" <tonyrouget@yahoo.com>
• Enquiry to find emf
  • From: "drsuresh100" <drsuresh100@yahoo.com>
• Re: Problem on DXF Output .
  • From: "acembuselik" <acanakoglu@dumlupinar.edu.tr>
• Re: [femm] Re: Problem on DXF Output .
  • From: David Meeker <dmeeker@ieee.org>
• drag force with FEMM
  • From: "tano1938" <rgarritano@comcast.net>
• Re: Modeling a loudspeaker motor
  • From: "strykeaudio" <strykeaudio@yahoo.com>
• need help Modeling new loudspeaker design
  • From: "strykeaudio" <strykeaudio@yahoo.com>
• Re: [femm] drag force with FEMM
  • From: David Meeker <dmeeker@ieee.org>
• Re: need help Modeling new loudspeaker design
  • From: "bill_fagal" <billfagal@afmonline.org>
• 1008 properties
  • From: "bill_fagal" <billfagal@afmonline.org>
• Re: drag force with FEMM
  • From: "tano1938" <rgarritano@comcast.net>
• Voice Coil Motor with Aluminum bobbin
  • From: "tano1938" <rgarritano@comcast.net>
• Selectgroup problem
  • From: "Eric Vogels" <eric.vogels@telia.com>
• Re: [femm] Selectgroup problem
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Selectgroup problem
  • From: "Eric Vogels" <eric.vogels@telia.com>
• Minor updates
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] 1008 properties
  • From: Sheila Wark/ Tim Gladwin <warkwyn@magma.ca>
• Re: 1008 properties
  • From: "bill_fagal" <billfagal@afmonline.org>
• Thanks for DXF output bug
  • From: "acembuselik" <acanakoglu@dumlupinar.edu.tr>
• Re: [femm] Minor updates
  • From: "robert Macy" <macy@california.com>
• total losses in the conductor
  • From: "robert Macy" <macy@california.com>
• Re: [femm] Minor updates
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] total losses in the conductor
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Voice Coil Motor with Aluminum bobbin
  • From: David Meeker <dmeeker@ieee.org>
• egun simulation
  • From: anir bakhtiar <fisikdan@yahoo.fr>
• Re: Voice Coil Motor with Aluminum bobbin
  • From: "tano1938" <rgarritano@comcast.net>
• Re: [femm] Re: Voice Coil Motor with Aluminum bobbin
  • From: David Meeker <dmeeker@ieee.org>
• Speed Sensor
  • From: "Earanky, Vijay (GEAE, Unison-JAX)" <Vijay.Earanky@unison.ae.ge.com>
• 12L14 BH Curve
  • From: "Einar Chua" <Echua@dbp4switches.com>
• Load line in magnet systems
  • From: "Olav Mellum Arntzen" <olav@seas.no>
• Re: [femm] Speed Sensor
  • From: David Meeker <dmeeker@ieee.org>
• RE: [femm] Speed Sensor
  • From: "Earanky, Vijay (GEAE, Unison-JAX)" <Vijay.Earanky@unison.ae.ge.com>
• Re: [femm] Speed Sensor
  • From: David Meeker <dmeeker@ieee.org>
• Pole end modeling questions
  • From: Tom Hansen <tomh@sonic.net>
• Re: [femm] Pole end modeling questions
  • From: David Meeker <dmeeker@ieee.org>
• Transient Magnetic Field Analysis
  • From: "mjcraft78" <mjcraft78@yahoo.com>
• Re: Transient Magnetic Field Analysis
  • From: David Meeker <dmeeker@ieee.org>
• Density Plots limited to B
  • From: "Robert Macy" <macy@california.com>
• problem
  • From: celia lauar <celialauarbr@yahoo.com.br>
• Re: Density Plots limited to B / problem
  • From: David Meeker <dmeeker@ieee.org>
• [no subject]
  • From: "christianconce2000" <christianconce2000@yahoo.com>
• stretched stator
  • From: "christianconce2000" <christianconce2000@yahoo.com>
• RE: [femm] Transient Magnetic Field Analysis
  • From: "Wellington Koepsel" <wkoepsel@worldnet.att.net>
• transient analysis
  • From: William Brodie-Tyrrell <wfbrodie@smug.adelaide.edu.au>
• Re: [femm] transient analysis
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• [no subject]
  • From: "tsarafidy" <tsarafidy@yahoo.fr>
• High Temperature Magnet Wire (>240C)
  • From: "davidsde01" <davidsde01@netscape.net>
• RES: [femm] High Temperature Magnet Wire (>240C)
  • From: "Paulo Valadares" <v2studio@terra.com.br>
• Re: [femm] (unknown)
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] High Temperature Magnet Wire (>240C)
  • From: "Richard Martin" <dick_martin@worldnet.att.net>
• Re: [femm] transient analysis
  • From: William Brodie-Tyrrell <wfbrodie@smug.adelaide.edu.au>
• [How can I use "sine function" in lua script?]
  • From: "khmr8425" <khmr8425@yahoo.co.kr>
• femm source
  • From: "José Alberto Pérez Benitez" <benitez@cnt.uo.edu.cu>
• Re: [femm] [How can I use "sine function" in lua script?]
  • From: Tsarafidy RAMINOSOA <tsarafidy@yahoo.fr>
• Re: [femm] [How can I use "sine function" in lua script?]
  • From: Tsarafidy RAMINOSOA <tsarafidy@yahoo.fr>
• RE: [femm] (unknown)
  • From: "Juan Tapia" <jtapia@die.udec.cl>
• Re: [femm] transient analysis
  • From: William Brodie-Tyrrell <wfbrodie@smug.adelaide.edu.au>
• Re: [Still Error ocurred.. :-( ]
  • From: "khmr8425" <khmr8425@yahoo.co.kr>
• Re: [femm] transient analysis
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: [femm] Re: [Still Error ocurred.. :-( ]
  • From: Tsarafidy RAMINOSOA <tsarafidy@yahoo.fr>
• Re: [femm] [How can I use "sine function" in lua script?]
  • From: TomSutrina@aol.com
• Re: [femm] transient analysis
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• boundary condition and torque calculation
  • From: "Juan Tapia" <jtapia@die.udec.cl>
• Re: boundary condition and torque calculation
  • From: "David Meeker" <dmeeker@ieee.org>
• RE: [femm] Re: boundary condition and torque calculation
  • From: "Juan Tapia" <jtapia@die.udec.cl>
• Re: [femm] Re: boundary condition and torque calculation
  • From: David Meeker <dmeeker@ieee.org>
• force calculation
  • From: "Juan Tapia" <jtapia@die.udec.cl>
• Re: [femm] force calculation
  • From: David Meeker <dmeeker@ieee.org>
• grad(H^2) plot
  • From: "mbe_pondro" <mbe_pondro@yahoo.com>
• BH curve EN24T
  • From: "anpalahan" <anpalahan@yahoo.co.uk>
• PM design - Simulation results far from Prototype results....
  • From: "tonyrouget" <tonyrouget@yahoo.com>
• Re: [femm] PM design - Simulation results far from Prototype results....
  • From: marctt2@aol.com
• Re: [femm] PM design - Simulation results far from Prototype results....
  • From: Sven Olsen <a1greatdane@yahoo.com>
• Re: PM design - Simulation results far from Prototype results....
  • From: "tonyrouget" <tonyrouget@yahoo.com>
• Re: [femm] Re: PM design - Simulation results far from Prototype results....
  • From: Sven Olsen <a1greatdane@yahoo.com>
• Re: grad(H^2) plot
  • From: "David Meeker" <dmeeker@ieee.org>
• Re: PM design - Simulation results far from Prototype results....
  • From: "rooom99" <kramer-b@t-online.de>
• help
  • From: eaid goda <eaidgoda@yahoo.com>
• Electro magnet
  • From: "Eric Vogels" <eric.vogels@telia.com>
• Re: [femm] Electro magnet
  • From: "Hendrik Hasper" <h.hasper@phys.rug.nl>
• Jiles-Atherton Model
  • From: "alejandro_montenegro" <alejandro_montenegro@yahoo.com>
• Re: [femm] Jiles-Atherton Model
  • From: "Antonio F.R. Carabio" <ingacarabio@fibertel.com.ar>
• Re: [femm] Jiles-Atherton Model
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: Jiles-Atherton Model
  • From: "alejandro_montenegro" <alejandro_montenegro@yahoo.com>
• Re: [femm] Jiles-Atherton Model
  • From: Jose Alberto Pérez Benitez <benitez@cnt.uo.edu.cu>
• lua script data storage in vectors and matrices
  • From: "ac090960" <ac090960@yahoo.it>
• Re: [femm] lua script data storage in vectors and matrices
  • From: David Meeker <dmeeker@ieee.org>
• Flux calculation
  • From: "Mihai Priboianu" <pribo@amotion.pub.ro>
• Effects of Aging on CRCA Steel Laminations in small motors
  • From: "jayam" <jaychandarm@hotmail.com>
• Induction Motor
  • From: ihsan canakoglu <acembuselik@yahoo.com>
• Re: [femm] Induction Motor
  • From: David Meeker <dmeeker@ieee.org>
• Re: Flux calculation
  • From: "David Meeker" <dmeeker@ieee.org>
• Plots of Je
  • From: "robert Macy" <macy@california.com>
• Re: [femm] Plots of Je
  • From: "Robert Macy" <macy@california.com>
• Brushless DC Motors
  • From: "johnkdehart" <johnkdehart@yahoo.com>
• Re: Plots of Je
  • From: "David Meeker" <dmeeker@ieee.org>
• Re: Brushless DC Motors
  • From: "masteringmatlab" <masteringmatlab@yahoo.com>
• Invar36
  • From: Sarah Powell <sarah.powell@gencoa.com>
• This software able to solve the electrostatic problem?
  • From: "Nicholas Lim" <virusxmenz@yahoo.com>
• Induction Motor Tourqe Calculation
  • From: ihsan canakoglu <acembuselik@yahoo.com>
• Re: [femm] This software able to solve the electrostatic problem?
  • From: David Meeker <dmeeker@ieee.org>
• Re: How calculate distribution and value of EMF?
  • From: "masteringmatlab" <masteringmatlab@yahoo.com>
• Re: [femm] Induction Motor Tourqe Calculation
  • From: riad kechrpud <r_kechroud@yahoo.fr>
• Help
  • From: "Santosh" <vsantosh78@yahoo.co.in>
• Lua questions: scripts and functions
  • From: "masteringmatlab" <masteringmatlab@yahoo.com>
• Re: [femm] Lua questions: scripts and functions
  • From: David Meeker <dmeeker@ieee.org>
• feeping creaturism
  • From: William Brodie-Tyrrell <wfbrodie@smug.adelaide.edu.au>
• Re: [femm] Induction Motor Tourqe Calculation
  • From: ihsan canakoglu <acembuselik@yahoo.com>
• Re: [femm] Help
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Re: How calculate distribution and value of EMF?
  • From: "TMax" <mrtycho@libero.it>
• Re: How calculate distribution and value of EMF?
  • From: "masteringmatlab" <masteringmatlab@yahoo.com>
• Re: [femm] Re: How calculate distribution and value of EMF?
  • From: "TMax" <mrtycho@libero.it>
• Re: [femm] Induction Motor Tourqe Calculation
  • From: David Meeker <dmeeker@ieee.org>
• Material proprietes: magnet
  • From: "TMax" <mrtycho@libero.it>
• Re: [femm] Material proprietes: magnet
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] feeping creaturism
  • From: David Meeker <dmeeker@ieee.org>
• lua script to draw rotor and stator of a PMSM
  • From: "masteringmatlab" <masteringmatlab@yahoo.com>
• Need some help fo my masters
  • From: "ash_atalla79" <ash_atalla79@yahoo.com>
• Re: Need some help fo my masters
  • From: "masteringmatlab" <masteringmatlab@yahoo.com>
• DC vs AC results
  • From: Michael Craft <mjcraft78@yahoo.com>
• Re: [femm] DC vs AC results
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Re: Need some help fo my masters
  • From: Ashraf Atalla <ash_atalla79@yahoo.com>
• flux distribution in an induction motor on full-load
  • From: "Tielman Slabbert" <tielman01@telkomsa.net>
• Re: Need some help fo my masters
  • From: "masteringmatlab" <masteringmatlab@yahoo.com>
• Re: [femm] flux distribution in an induction motor on full-load
  • From: David Meeker <dmeeker@ieee.org>
• linear generator analysis using FEMM
  • From: "poyet16" <poyet16@yahoo.co.uk>
• Re: [femm] flux distribution in an induction motor on full-load
  • From: "Tielman Slabbert" <tielman01@telkomsa.net>
• linear generator
  • From: "poyet16" <poyet16@yahoo.co.uk>
• Linear motor calculation
  • From: "magdymaa" <magdyma@hotmail.com>
• Design calculation of PM linear dc motor
  • From: "magdymaa" <magdyma@hotmail.com>
• Can femm model this?
  • From: "wigstonmagna" <andrew_ppp@hotmail.com>
• Re: [femm] Can femm model this?
  • From: David Meeker <dmeeker@ieee.org>
• Re: Can femm model this?
  • From: "wigstonmagna" <andrew_ppp@hotmail.com>
• Re: [femm] Re: Can femm model this?
  • From: "H.Hasper" <h.Hasper@fwn.rug.nl>
• Problem with the unit of H
  • From: "jflrlk" <jflrlk@yahoo.com>
• Re: Can femm model this?
  • From: "wigstonmagna" <andrew_ppp@hotmail.com>
• Re: [femm] Re: Can femm model this?
  • From: David Meeker <dmeeker@ieee.org>
• Bx,By- distributions
  • From: "vasyl47" <vasyl47@yahoo.com>
• Re: Can femm model this?
  • From: "wigstonmagna" <andrew_ppp@hotmail.com>
• Re: Can femm model this?
  • From: "David Meeker" <dmeeker@ieee.org>
• Re: [femm] Problem with the unit of H
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: Can femm model this?
  • From: "wigstonmagna" <andrew_ppp@hotmail.com>
• How to specify the magnetic material properties of lamination steel?
  • From: "jflrlk" <jflrlk@yahoo.com>
• Re: [femm] How to specify the magnetic material properties of lamination steel?
  • From: Dave Squires <djsquires@plix.com>
• Force calculation
  • From: faridun naim <poyet16@yahoo.co.uk>
• Re: [femm] How to specify the magnetic material properties of lamination steel?
  • From: David Meeker <dmeeker@ieee.org>
• FEMM for linear force motor
  • From: "magdymaa" <magdyma@hotmail.com>
• dxf import
  • From: "Gal Janos" <gal.janos@mailbox.hu>
• Approximation of non-axisymmetric geometry
  • From: "niallcaldwell" <niall.caldwell@ed.ac.uk>
• Re: Force calculation
  • From: "David Meeker" <dmeeker@ieee.org>
• Re: Approximation of non-axisymmetric geometry
  • From: "jflrlk" <jflrlk@yahoo.com>
• Simulink model of SR motor
  • From: "kutayyilmaz" <kutayyilmaz@yahoo.com>
• Re: [femm] Approximation of non-axisymmetric geometry
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Re: Approximation of non-axisymmetric geometry
  • From: David Meeker <dmeeker@ieee.org>
• how to calculate transformer inductance
  • From: "anis20202001" <anis20202001@yahoo.com>
• Re: [femm] Simulink model of SR motor
  • From: Peter Omand Rasmussen <por@iet.auc.dk>
• references
  • From: "Juan Tapia" <jtapia@die.udec.cl>
• Modelling the new discovery of electrostatic rotation
  • From: "wigstonmagna" <andrew_ppp@hotmail.com>
• Re: [femm] Modelling the new discovery of electrostatic rotation
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] Modelling the new discovery of electrostatic rotation
  • From: djsquires@plix.com
• Re: [femm] Modelling the new discovery of electrostatic rotation
  • From: "Ivan Reede" <i_reede@amerisys.com>
• Re: [femm] Modelling the new discovery of electrostatic rotation
  • From: Dave Squires <djsquires@plix.com>
• Transducer design - back emf, faraday ring modeling
  • From: "Vikash_Chauhan" <purekismet@ntlworld.com>
• hist. losses in FEMM
  • From: "jasiu2003" <zimonj@wp.pl>
• Re: [femm] hist. losses in FEMM
  • From: David Meeker <dmeeker@ieee.org>
• BELA and showmesh() command in LUA file
  • From: "James Pawson" <thedatastream@yahoo.com>
• finite element in femm
  • From: "wks8441" <wks8441@yahoo.co.uk>
• Some doubtful in BELA..
  • From: "Nicholas Lim" <virusxmenz@yahoo.com>
• obtaining node co-ordinates
  • From: "James Pawson" <thedatastream@yahoo.com>
• permanent magnets
  • From: "Stan" <sg@ieee.org>
• Re: permanent magnets
  • From: "David Meeker" <dmeeker@ieee.org>
• Re: obtaining node co-ordinates
  • From: "James Pawson" <thedatastream@yahoo.com>
• Re: [femm] Some doubtful in BELA..
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] obtaining node co-ordinates
  • From: David Meeker <dmeeker@ieee.org>
• Re: obtaining node co-ordinates
  • From: "James Pawson" <thedatastream@yahoo.com>
• Postprocessor error
  • From: "Tielman Slabbert" <tielman01@telkomsa.net>
• Re: obtaining node co-ordinates
  • From: "James Pawson" <thedatastream@yahoo.com>
• Re: Some doubtful in BELA..
  • From: "Nicholas Lim" <virusxmenz@yahoo.com>
• Re: [femm] Postprocessor error
  • From: David Meeker <dmeeker@ieee.org>
• how do I model a torroidal transformer ?
  • From: "Dr Mark Snoswell" <mark@cgCharacter.com>
• Re: [femm] how do I model a torroidal transformer ?
  • From: "Prem Kumar C" <prem@bhelrnd.co.in>
• Re: [femm] how do I model a torroidal transformer ?
  • From: "robert Macy" <macy@california.com>
• Re: [femm] how do I model a torroidal transformer ?
  • From: Dave Squires <djsquires@plix.com>
• B-H curve of neodymium magnet
  • From: "anilpuppala4in" <anilpuppala4in@yahoo.com>
• Re: B-H curve of neodymium magnet
  • From: "masteringmatlab" <masteringmatlab@yahoo.com>
• Re: [femm] how do I model a torroidal transformer ?
  • From: "robert Macy" <macy@california.com>
• Re: [femm] how do I model a torroidal transformer ?
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• RE: [femm] how do I model a torroidal transformer ?
  • From: "Mark Snoswell" <mark@cgCharacter.com>
• crude 3D modelling in BELA
  • From: "James Pawson" <thedatastream@yahoo.com>
• Re: [femm] how do I model a torroidal transformer ?
  • From: Dave Squires <djsquires@plix.com>
• Re: [femm] how do I model a torroidal transformer ?
  • From: "robert Macy" <macy@california.com>
• Re: [femm] how do I model a torroidal transformer ?
  • From: "robert Macy" <macy@california.com>
• Re: [femm] how do I model a torroidal transformer ?
  • From: Dave Squires <djsquires@plix.com>
• Re: [femm] how do I model a torroidal transformer ?
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: how do I model a torroidal transformer ?
  • From: David Meeker <dmeeker@ieee.org>
• Lua language
  • From: "ahmad_m_eid" <ahmad_m_eid@yahoo.com>
• force evaluation ..
  • From: "l_dennys2000" <l_dennys2000@yahoo.com>
• Re: [femm] Lua language
  • From: David Meeker <dmeeker@ieee.org>
• boundary-conditions
  • From: Edgar Peralta <eperaltas@yahoo.com.mx>
• torque calculation
  • From: "Juan Tapia" <jtapia@die.udec.cl>
• Re: [femm] torque calculation
  • From: dazolee <daizolee@yahoo.com>
• Re: boundary-conditions
  • From: "David Meeker" <dmeeker@ieee.org>
• Re: torque calculation
  • From: "David Meeker" <dmeeker@ieee.org>
• Induction Motor Torque Calculation
  • From: "Juan Tapia" <jtapia@die.udec.cl>
• Transformer Forward curent and magnetizing current
  • From: "jire602000" <jire@club-internet.fr>
• current in slot conductors
  • From: "ahmad_m_eid" <ahmad_m_eid@yahoo.com>
• Re: [femm] current in slot conductors
  • From: "Prem Kumar C" <prem@bhelrnd.co.in>
• Re: [femm] current in slot conductors
  • From: "Ivan Slabbert" <ivan_slabbert@msn.com>
• Re: current in slot conductors
  • From: "David Meeker" <dmeeker@ieee.org>
• A web portal about Finite Elements and Simulation
  • From: "www_6dof_com" <sixdof@tiscali.fr>
• Multiple group membership for nodes
  • From: "niallcaldwell" <niall.caldwell@ed.ac.uk>
• why different force??
  • From: "ahmad_m_eid" <ahmad_m_eid@yahoo.com>
• Re: [femm] Transformer Forward curent and magnetizing current
  • From: David Meeker <dmeeker@ieee.org>
• Re: why different force??
  • From: "David Meeker" <dmeeker@ieee.org>
• Re: Multiple group membership for nodes
  • From: "David Meeker" <dmeeker@ieee.org>
• mesh density
  • From: "ahmad_m_eid" <ahmad_m_eid@yahoo.com>
• how i can design toroidal inductors?
  • From: "tofighi2" <tofighi2@yahoo.com>
• How do I apply slip coeficient?
  • From: "huntcity" <huntcity@yahoo.co.kr>
• discharging capacitor
  • From: "av_ronen" <av_ronen@yahoo.com>
• outside area?
  • From: "ahmad_m_eid" <ahmad_m_eid@yahoo.com>
• DC motors model
  • From: "Juan Tapia" <jtapia@die.udec.cl>
• Re: [femm] discharging capacitor
  • From: "Jim in_Dallas" <jim271@hotmail.com>
• Re: mesh density / outside area?
  • From: David Meeker <dmeeker@ieee.org>
• IEE ring problem
  • From: "ahmad_m_eid" <ahmad_m_eid@yahoo.com>
• IEE ring problem(attached file)
  • From: Ahmad Eid <ahmad_m_eid@yahoo.com>
• Re: [femm] IEE ring problem
  • From: David Meeker <dmeeker@ieee.org>
• LUA command
  • From: rizal man <wks8441@yahoo.co.uk>
• FEMM & C++
  • From: "ahmad_m_eid" <ahmad_m_eid@yahoo.com>
• Re: [femm] FEMM & C++
  • From: "Eric Vogels" <eric.vogels@telia.com>
• Re: [femm] FEMM & C++
  • From: "Fabio" <fmilanesi@tin.it>
• Multiple Document Interface version
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] FEMM & C++
  • From: "Eric Vogels" <eric.vogels@telia.com>
• Rif: [femm] Multiple Document Interface version
  • From: giovanni.bortolan@sogagroup.com
• Re: Rif: [femm] Multiple Document Interface version
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: Rif: [femm] Multiple Document Interface version
  • From: David Meeker <dmeeker@ieee.org>
• "pause" and "continue" capability
  • From: "robert Macy" <macy@california.com>
• RE: [femm] Multiple Document Interface version
  • From: "Robin Cornelius" <robin.cornelius@hirst-magnetics.com>
• How to define the current in a circuit
  • From: Lefu Zhang <lefu_zhang@yahoo.com>
• RES: [femm] How to define the current in a circuit
  • From: "Francisco de Assis Ferreira Tejo" <tejo@dee.ufcg.edu.br>
• Re: [femm] How to define the current in a circuit
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Analysis and design of electromagnetic actuator
  • From: abdul qadir <aqbhatti_2000@yahoo.com>
• [no subject]
  • From: Ramdane LATEB <ramdane.lateb@ensem.inpl-nancy.fr>
• Re: Analysis and design of electromagnetic actuator
  • From: "Ralph Lortie" <rlortie@uci.net>
• Re: Analysis and design of electromagnetic actuator
  • From: "David Meeker" <dmeeker@ieee.org>
• some proposals for future developments
  • From: giovanni.bortolan@sogagroup.com
• comparison of ANSYS solenoid actuator with FEMM
  • From: "bhatti" <bhatti@enveng.titech.ac.jp>
• Re: [femm] some proposals for future developments
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] about magnetization of magnets
  • From: Dave Squires <djsquires@plix.com>
• Solenoid fields -3D
  • From: "kt4ye" <BillMillerKT4YE@worldnet.att.net>
• Re: some proposals for future developments
  • From: "atreding" <atreding@gwlisk.com>
• four values for Maxwell force??
  • From: "ahmad_m_eid" <ahmad_m_eid@yahoo.com>
• RE: [femm] Re: some proposals for future developments
  • From: Mark Smith <mark.smith@linx.co.uk>
• Problem with triangle on femm3.3
  • From: Tsarafidy RAMINOSOA <tsarafidy@yahoo.fr>
• Rif: [femm] Problem with triangle on femm3.3
  • From: giovanni.bortolan@sogagroup.com
• Re: some proposals for future developments
  • From: "atreding" <atreding@gwlisk.com>
• Re: Rif: [femm] Problem with triangle on femm3.3
  • From: Tsarafidy RAMINOSOA <tsarafidy@yahoo.fr>
• Two phase induction motor
  • From: "jire602000" <jire@club-internet.fr>
• Re: [femm] Re: some proposals for future developments
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: [femm] Re: some proposals for future developments
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• problems with FEMM-4
  • From: "ahmad_m_eid" <ahmad_m_eid@yahoo.com>
• Re: some proposals for future developments
  • From: "David Meeker" <dmeeker@ieee.org>
• Re: problems with FEMM-4
  • From: "David Meeker" <dmeeker@ieee.org>
• Re: four values for Maxwell force??
  • From: "David Meeker" <dmeeker@ieee.org>
• Re: [femm] about magnetization of magnets
  • From: prem swaroop <swaroopk4u@yahoo.co.in>
• Re: some proposals for future developments
  • From: "atreding" <atreding@gwlisk.com>
• Re: [femm] Re: some proposals for future developments
  • From: Keith Gregory <k.gregory@lboro.ac.uk>
• Re: some proposals for future developments
  • From: "atreding" <atreding@gwlisk.com>
• Re: Transducer design - back emf, faraday ring modeling
  • From: "Vikash_Chauhan" <vikash_chauhan@yahoo.com>
• J-Square integral
  • From: "geezer_gatech" <gte584m@prism.gatech.edu>
• External Load in FEMM
  • From: "ahmad_m_eid" <ahmad_m_eid@yahoo.com>
• ac current
  • From: "ahmad_m_eid" <ahmad_m_eid@yahoo.com>
• Re: J-Square integral
  • From: "David Meeker" <dmeeker@ieee.org>
• New FEMM-related consultancy services available
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: ac current
  • From: "David Meeker" <dmeeker@ieee.org>
• Re: External Load in FEMM
  • From: "David Meeker" <dmeeker@ieee.org>
• Calculation of screen current
  • From: "Winfried Graupner" <winfried.graupner@gmx.de>
• Re: [femm] Calculation of screen current
  • From: David Meeker <dmeeker@foster-miller.com>
• Info from 6dof
  • From: "Victor (6dof.com admin)" <sixdof@tiscali.fr>
• Block of Iron
  • From: Dilney <dilneyfej@yahoo.com.br>
• Rif: [femm] Block of Iron
  • From: giovanni.bortolan@sogagroup.com
• Intrinsic and Normal Hc??
  • From: "ahmad_m_eid" <ahmad_m_eid@yahoo.com>
• Re: [femm] Intrinsic and Normal Hc??
  • From: David Meeker <dmeeker@foster-miller.com>
• Change of address for FEMM website
  • From: David Meeker <dmeeker@foster-miller.com>
• Problems with simple LUA script
  • From: "tdaniyar" <tdaniyar@yahoo.com>
• Re: [femm] Problems with simple LUA script
  • From: "Prem Kumar C" <prem@bhelrnd.co.in>
• [FEMM] Mailing list moved
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [FEMM] Mailing list moved
  • From: "Prem Kumar C" <prem@bhelrnd.co.in>
• [FEMM] Compatibilty problem ?
  • From: "Fabio" <fmilanesi@tin.it>
• Re: [FEMM] Compatibilty problem ?
  • From: David Meeker <dmeeker@ieee.org>
• [FEMM] BH curve EN24T
  • From: "D Ishak" <usm_ishak@hotmail.com>
• [FEMM] How to get computation time with lua script
  • From: Tsarafidy RAMINOSOA <tsarafidy@yahoo.fr>
• Re: [FEMM] How to get computation time with lua script
  • From: David Meeker <dmeeker@ieee.org>
• Re: [FEMM] How to get computation time with lua script
  • From: Keith Gregory <K.Gregory@lboro.ac.uk>
• [FEMM] Re: How to get computation time with lua script
  • From: Barry Hansen <coilgun@oz.net>
• Re: Thanks [FEMM] Re: How to get computation time with lua script
  • From: Tsarafidy RAMINOSOA <tsarafidy@yahoo.fr>
• Thanks --- Re: [FEMM] How to get computation time with lua script
  • From: Tsarafidy RAMINOSOA <tsarafidy@yahoo.fr>
• [FEMM] velocity calculation
  • From: Ahmad Eid <ahmad_m_eid@yahoo.com>
• Re: [FEMM] velocity calculation
  • From: David Meeker <dmeeker@foster-miller.com>
• [FEMM] velocity & energy for LG!
  • From: Ahmad Eid <ahmad_m_eid@yahoo.com>
• [FEMM] Thank you David Meeker and of course a question :-)
  • From: Alex Thaler <alex.thaler@aon.at>
• [FEMM] A little paradox with anti-periodic boundary condition and torque computation
  • From: Tsarafidy RAMINOSOA <tsarafidy@yahoo.fr>
• [FEMM] femm 4.0 download link no longer available
  • From: Tsarafidy RAMINOSOA <tsarafidy@yahoo.fr>
• [FEMM] How do I model a multiple turn copper wire coil?
  • From: Mike Middleton <mike@wirebenders.com>
• Re: [FEMM] Thank you David Meeker and of course a question :-)
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [FEMM] A little paradox with anti-periodic boundary condition and torque computation
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [FEMM] femm 4.0 download link no longer available
  • From: Keith Gregory <K.Gregory@lboro.ac.uk>
• Thanks -- Re: [FEMM] femm 4.0 download link no longer available
  • From: Tsarafidy RAMINOSOA <tsarafidy@yahoo.fr>
• Re: [FEMM] A little paradox with anti-periodic boundary condition and torque computation
  • From: Tsarafidy RAMINOSOA <tsarafidy@yahoo.fr>
• [FEMM] A DOT J Integral over laminated region
  • From: Thomas Wilson <gte584m@mail.gatech.edu>
• Re: [FEMM] How do I model a multiple turn copper wire coil?
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [FEMM] A DOT J Integral over laminated region
  • From: David Meeker <dmeeker@foster-miller.com>
• [FEMM] Modeling multiple turn coils
  • From: Scott <shanteserve@yahoo.com>
• Re: [FEMM] Modeling multiple turn coils
  • From: David Meeker <dmeeker@foster-miller.com>
• [FEMM] Force Vs displacement of Magnet2.fem example
  • From: Bhatti <bhatti@enveng.titech.ac.jp>
• [FEMM] Magnetizing Inductance and Iron Resistance in Induction Machine
  • From: ihsan canakoglu <acembuselik@yahoo.com>
• [FEMM] Tape wound core modeling
  • From: Dave Squires <djsquires@plix.com>
• RE: [FEMM] Magnetizing Inductance and Iron Resistance in InductionMachine
  • From: "osman bilgin" <obilgin@selcuk.edu.tr>
• Re: [FEMM] Tape wound core modeling
  • From: David Meeker <dmeeker@foster-miller.com>
• [FEMM] Files area online
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [FEMM] Tape wound core modeling
  • From: Dave Squires <djsquires@plix.com>
• [FEMM] Need BH curves for deposited Permalloy
  • From: "robert Macy" <macy@california.com>
• [FEMM] BH curves for 52100 hardened bearing steel
  • From: jimmy mcguire <jxmcguire1@ualr.edu>
• [FEMM] Another suggestion for the next version?
  • From: Alex Thaler <alex.thaler@aon.at>
• [FEMM] 3-D interface
  • From: giovanni.bortolan@sogagroup.com
• Re: [FEMM] Another suggestion for the next version?
  • From: David Meeker <dmeeker@ieee.org>
• Re: [FEMM] Another suggestion for the next version?
  • From: Alex Thaler <alex.thaler@aon.at>
• [FEMM] problem with vector plot
  • From: smaïl mezani <s_mezani@yahoo.fr>
• Re: [FEMM] problem with vector plot
  • From: David Meeker <dmeeker@ieee.org>
• [FEMM] About the modelization of small coils
  • From: Patrick Rosa <patrick.rosa@unifi.it>
• [FEMM] about jiles atherton model
  • From: Sri Lakshmi Nalla <nall8792@uidaho.edu>
• Re: [FEMM] about jiles atherton model
  • From: Willem-Jan Ouborg <wouborg@yahoo.com>
• [FEMM] Development Release
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [FEMM] About the modelization of small coils
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [FEMM] Development Release
  • From: David Meeker <dmeeker@foster-miller.com>
• [FEMM] How does femm handle coercivity and core losses?
  • From: "robert Macy" <macy@california.com>
• Re: [FEMM] How does femm handle coercivity and core losses?
  • From: David Meeker <dmeeker@foster-miller.com>
• [FEMM] How do you interpret inductance values? And predict inductor Q?
  • From: "robert Macy" <macy@california.com>
• Re: [FEMM] How do you interpret inductance values? And predict inductor Q?
  • From: David Meeker <dmeeker@foster-miller.com>
• [FEMM] Capacitance benchmarks
  • From: Mark Smith <mark.smith@linx.co.uk>
• [FEMM] Solid block vs laminations - does not compare
  • From: "robert Macy" <macy@california.com>
• Re: [FEMM] Solid block vs laminations - does not compare
  • From: David Meeker <dmeeker@ieee.org>
• Re: [FEMM] Solid block vs laminations - does not compare
  • From: "robert Macy" <macy@california.com>
• Re: [FEMM] Capacitance benchmarks
  • From: David Meeker <dmeeker@foster-miller.com>
• [FEMM] Time stepping method and FEMM
  • From: <PikoH@centrum.sk>
• Re: [FEMM] Need BH curves for deposited Permalloy
  • From: ATFSI@aol.com
• Re: [FEMM] Need BH curves for deposited Permalloy
  • From: "robert Macy" <macy@california.com>
• [FEMM] Two phase induction motor
  • From: "Francois Disch" <disch@robotic.dlr.de>
• [FEMM] [Fwd: Book on Variable Reluctance Machines]
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [FEMM] Two phase induction motor
  • From: "Prof. Jose Roberto Camacho" <jrcamacho@ufu.br>
• [FEMM] Two phase induction motor
  • From: René Cornec <jire@club-internet.fr>
• [FEMM] How to freeze the reluctivities in each element?
  • From: Ramdane LATEB <ramdane.lateb@ensem.inpl-nancy.fr>
• Re: [FEMM] How to freeze the reluctivities in each element?
  • From: David Meeker <dmeeker@foster-miller.com>
• [FEMM] FEA engineer need
  • From: "Theeraphan Polrob" <polrob@ksc.th.com>
• Re: [FEMM] FEA engineer need
  • From: Paul Victor Birke <nonlinear@rogers.com>
• [FEMM] Origins of the superposition theory.
  • From: "Thwala Hanana" <thwala@inkundla.net>
• Re: [FEMM] Origins of the superposition theory.
  • From: David Meeker <dmeeker@foster-miller.com>
• [FEMM] Help again
  • From: "Bruce G. Kang" <xiandaiwuxue@yahoo.com>
• Re: [FEMM] Help again
  • From: David Meeker <dmeeker@foster-miller.com>
• [FEMM] Merry Christmas to David !!!
  • From: "Bruce G. Kang" <xiandaiwuxue@yahoo.com>
• [femm] Comparing inductance predictions: femm vs standard formula
  • From: Dan Haronian <Dan.Haronian@siband.com>
• Re: [femm] Comparing inductance predictions: femm vs standard formula
  • From: David Meeker <dmeeker@ieee.org>
• [FEMM] Examples and the new lua magnetics
  • From: Tom Hansen <tom@rdproducts.com>
• Re: [FEMM] Examples and the new lua magnetics
  • From: David Meeker <dmeeker@ieee.org>
• [FEMM] bc mistake??
  • From: "Polychronis Vallianatos" <rotechen@otenet.gr>
• [FEMM] bc mistake??
  • From: "Polychronis Vallianatos" <rotechen@otenet.gr>
• Re: [FEMM] bc mistake??
  • From: "robert Macy" <macy@california.com>
• Re: [FEMM] bc mistake??
  • From: "robert Macy" <macy@california.com>
• [femm] Motion induced eddy currents
  • From: "C F Cheuk" <cfcheuk@blueyonder.co.uk>
• Re: [femm] Motion induced eddy currents
  • From: David Meeker <dmeeker@ieee.org>
• Re: [femm] uneven B value on the circumference
  • From: Senthil Ram <ndsr_99@yahoo.com>
• [femm] Electro-magnetic bearing
  • From: Rahul Kallurwar <r.kallurwar@csuohio.edu>
• Re: [femm] Electro-magnetic bearing
  • From: David Meeker <dmeeker@foster-miller.com>
• [FEMM] axisymmetric femm problem with ringmagnet and steel plate
  • From: "Walter,Reinhard" <Reinhard.Walter@ottobock.at>
• Re: [FEMM] axisymmetric femm problem with ringmagnet and steel plate
  • From: Keith Gregory <K.Gregory@lboro.ac.uk>
• Re: [FEMM] axisymmetric femm problem with ringmagnet and steel plate
  • From: Santiago Salamanca <santiago@salamanca.de>
• [FEMM] IMPORTANT
  • From: "Dilip Desai" <indu_srt@hotmail.com>
• [FEMM] Condolences
  • From: "Jeremy Moore" <ecotec@tpg.com.au>
• [FEMM] Re: all my condelences
  • From: Ramdane LATEB <rlateb@yahoo.fr>
• [FEMM] alnico5 versus ceramic5 ?
  • From: "Bengt Dahlberg" <d.bengt@bredband.net>
• Re: [FEMM] alnico5 versus ceramic5 ?
  • From: Keith Gregory <K.Gregory@lboro.ac.uk>
• Re: [FEMM] alnico5 versus ceramic5 ?
  • From: "Antonio F.R. Carabio" <ingacarabio@fibertel.com.ar>
• Re: [FEMM] alnico5 versus ceramic5 ?
  • From: "Bengt Dahlberg" <d.bengt@bredband.net>
• Re: [FEMM] alnico5 versus ceramic5 ?
  • From: "Bengt Dahlberg" <d.bengt@bredband.net>
• Re: [FEMM] alnico5 versus ceramic5 ?
  • From: David Meeker <dmeeker@ieee.org>
• [FEMM] radial magnetization of permanent magnet on rotor
  • From: aaron cheng <acytmnt@yahoo.co.uk>
• [FEMM] Offer for Magnetic Material Manufacturers
  • From: David Meeker <dmeeker@foster-miller.com>
• [FEMM] Thrust Bearing AC analysis
  • From: "Nathan Brown" <nathanbrown@snet.net>
• [FEMM] Circuit Prop not showing voltage/impedance?
  • From: Scott Diehl <Scott.Diehl@eminence.com>
• Re: [FEMM] Thrust Bearing AC analysis
  • From: David Meeker <dmeeker@ieee.org>
• Re: [FEMM] Circuit Prop not showing voltage/impedance?
  • From: David Meeker <dmeeker@ieee.org>
• [FEMM] Impedance of Voicecoil
  • From: Scott Diehl <Scott.Diehl@eminence.com>
• Re: [FEMM] Impedance of Voicecoil
  • From: David Meeker <dmeeker@foster-miller.com>
• [FEMM] LIM modeling
  • From: Nick Voronov <xbio247@yahoo.com>
• [FEMM] Can't Spawn Triangle
  • From: Rick Page <rick-page@shaw.ca>
• Re: [FEMM] Can't Spawn Triangle
  • From: David Meeker <dmeeker@ieee.org>
• Re: [FEMM] LIM modeling
  • From: David Meeker <dmeeker@ieee.org>
• [FEMM] [Founded some different value of Back EMF]
  • From: 강경호 <khmr1118@evplaza.com>
• RE: [FEMM] Can't Spawn Triangle
  • From: "Jiri Vecerka" <vecerkajiri@seznam.cz>
• [FEMM] FILL FACTOR
  • From: Santiago Salamanca <santiago@salamanca.de>
• [FEMM] RE: Can't Spawn Triangle
  • From: Rick Page <rick-page@shaw.ca>
• [FEMM] RE: Can't Spawn Triangle
  • From: Rick Page <rick-page@shaw.ca>
• Re: [FEMM] RE: Can't Spawn Triangle
  • From: "Eric Vogels" <eric.vogels@telia.com>
• [FEMM] RE: Can't Spawn Triangle -- Success
  • From: Rick Page <rick-page@shaw.ca>
• Re: [FEMM] [Founded some different value of Back EMF]
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [FEMM] FILL FACTOR
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [FEMM] FILL FACTOR
  • From: "KASTURY_HOTMAIL" <rkastury@hotmail.com>
• [FEMM] FILL FACTORY
  • From: Santiago Salamanca <santiago@salamanca.de>
• [FEMM] internal fault for a sychronous generator
  • From: Mohamed Karakache <mkarakdz@yahoo.fr>
• [FEMM] Doubt in BELA
  • From: nicholas lim <virusxmenz@yahoo.com>
• Re: [FEMM] FILL FACTOR
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [FEMM] Doubt in BELA
  • From: David Meeker <dmeeker@ieee.org>
• [FEMM] RE: Use Lua program for data extraction
  • From: Patrick[吳煥文高專] <patrick@more.com.tw>
• [FEMM] Distribution of magnetic field of coil ???
  • From: "mmisiak" <mmosiadz@o2.pl>
• [FEMM] (no subject)
  • From: Santiago Salamanca <santiago@salamanca.de>
• [FEMM] coil
  • From: Andrei Popa <tudodei@yahoo.com>
• [FEMM] New Version
  • From: "Julio Walter" <jwalter@telcel.net.ve>
• Re: [FEMM] New Version
  • From: David Meeker <dmeeker@foster-miller.com>
• Re: [FEMM] coil
  • From: David Meeker <dmeeker@ieee.org>
• [FEMM] Radial force in axymmetric problem
  • From: "Fabio" <fmilanesi@tin.it>
• [FEMM] Problems with math functions
  • From: Daniyarov Talgat <tdaniyar@yahoo.com>
• Re: [FEMM] Problems with math functions
  • From: "robert Macy" <macy@california.com>
• Re: [FEMM] Problems with math functions
  • From: "(EUETIT) JORNET" <jornet@ee.upc.es>
• Re: [FEMM] Problems with math functions
  • From: David Meeker <dmeeker@ieee.org>
• [FEMM] problem on plotting flux densityalong a curvature in the middle of airgap
  • From: "Cheng, Y." <yc6@leicester.ac.uk>
• Re: [FEMM] problem on plotting flux densityalong a curvature in the middle of airgap
  • From: David Meeker <dmeeker@foster-miller.com>
• [FEMM] writing user-defined data into filename
  • From: "Cheng, Y." <yc6@leicester.ac.uk>
• Re: [FEMM] writing user-defined data into filename
  • From: "robert Macy" <macy@california.com>
• [FEMM] Approximate Solution of Transient and periodic analysis with FEMM
  • From: ac <ac090960@yahoo.it>
• Re: [FEMM] Approximate Solution of Transient and periodic analysis withFEMM
  • From: "Fabio" <fmilanesi@tin.it>
• [FEMM] warning messages
  • From: aaron cheng <acytmnt@yahoo.co.uk>
• Re: [FEMM] warning messages
  • From: David Meeker <dmeeker@ieee.org>
• [FEMM] femm matrix solving time: 3.2 GHz Pentium IV vs AMD Athlon 3200+
  • From: "bhtongue" <bhtongue@superlink.net>
• [FEMM] FEMM features request
  • From: Tom Hansen <tom@rdproducts.com>
• Re: [FEMM] femm matrix solving time: 3.2 GHz Pentium IV vs AMD Athlon 3200+
  • From: "robert Macy" <macy@california.com>
• [FEMM] Coil Turns in serie/2conductors parallel
  • From: Santiago Salamanca <santiago@salamanca.de>
• Re: [FEMM] femm matrix solving time: 3.2 GHz Pentium IV vs AMD Athlon3200+
  • From: "wouter termote" <wouter.termote@pandora.be>
• [FEMM] Mathematica Scripting for FEMM
  • From: David Meeker <dmeeker@ieee.org>
• Re: [FEMM] FEMM features request
  • From: David Meeker <dmeeker@ieee.org>
• [FEMM] Reg : Coil Turns in serie/2conductors parallel
  • From: "C.Prem Kumar" <prem@bhelrnd.co.in>
• Re: [FEMM] Reg : Coil Turns in serie/2conductors parallel
  • From: Santiago Salamanca <santiago@salamanca.de>
• Re: [FEMM] Reg : Coil Turns in serie/2conductors parallel
  • From: "Fabio" <fmilanesi@tin.it>
• [FEMM] Solenoid charge
  • From: "yanze wuan" <yanzewuan@hotmail.com>
• Re: [FEMM] Solenoid charge
  • From: David Meeker <dmeeker@ieee.org>
• [FEMM] BH curves, intrinsic?
  • From: "Jean-Michel Le Cléac'h" <jean-michel.le_cleach@ensmp.fr>
• Re: [FEMM] BH curves, intrinsic?
  • From: David Meeker <dmeeker@ieee.org>
• [FEMM] BH curves, intrinsic?
  • From: "Jean-Michel Le Cléac'h" <lecleach@ensmp.fr>
• [FEMM] Three-phase-current
  • From: Santiago Salamanca <santiago@salamanca.de>
• Re: [FEMM] Solenoid charge
  • From: "yanze wuan" <yanzewuan@hotmail.com>
• [FEMM] Lua script to output B field and other info
  • From: Steven Adeff <adeffs@rpi.edu>
• Re: [FEMM] Lua script to output B field and other info
  • From: "robert Macy" <macy@california.com>
• [FEMM] Ferrofluid BH curve?
  • From: "Jean-Michel Le Cléac'h" <lecleach@ensmp.fr>
• Re: [FEMM] Ferrofluid BH curve?
  • From: "Antonio F.R. Carabio" <ingacarabio@fibertel.com.ar>
• Re: [FEMM] Solenoid charge
  • From: David Meeker <dmeeker@ieee.org>
• [FEMM] Serious doubt about FEMM3.3 XY graphics
  • From: agnaldo@if.ufrj.br
• [FEMM] modeling coils???
  • From: Jeff Peery <jeffpeery@yahoo.com>
• Re: [FEMM] Serious doubt about FEMM3.3 XY graphics
  • From: David Meeker <dmeeker@ieee.org>
• RE: [FEMM] modeling coils???
  • From: "Alexandru ANDREI" <andreial@home.ro>
• [FEMM] modeling coils???
  • From: Dobler Daniel <dobler.daniel@rw.hirschmann.at>
• RE: [FEMM] modeling coils???
  • From: "Dr. Lee Marriott" <Marriott@tpresearch.com>
• Re: [FEMM] modeling coils???
  • From: David Meeker <dmeeker@ieee.org>
• [FEMM] Inductance of lap wnding
  • From: Senthil Ram <ndsr_99@yahoo.com>
• [FEMM] Regd:Edge and nodal elements.
  • From: rathna.chitroju@se.abb.com
• [FEMM] spiky flux plot
  • From: aaron cheng <acytmnt@yahoo.co.uk>
• [FEMM] Magnetization curves
  • From: agnaldo@if.ufrj.br
• RE: [FEMM] Magnetization curves
  • From: "Jiri Vecerka" <vecerkajiri@seznam.cz>
• RE: [FEMM] Magnetization curves
  • From: "Robin Cornelius" <robin.cornelius@hirst-magnetics.com>
• Re: [FEMM] Magnetization curves
  • From: "Jeremy Moore" <ecotec@tpg.com.au>
• Re: [FEMM] Regd:Edge and nodal elements.
  • From: David Meeker <dmeeker@ieee.org>
• [FEMM] Updated development version
  • From: David Meeker <dmeeker@ieee.org>
• [FEMM] Humblest appologies!!
  • From: "Jeremy Moore" <ecotec@tpg.com.au>
• Re: [FEMM] Updated development version
  • From: Santiago Salamanca <santiago@salamanca.de>
• Re: [FEMM] Updated development version
  • From: David Meeker <dmeeker@ieee.org>
• RE: [FEMM] Updated development version
  • From: "Israel Kehaty" <tsiporak@hotmail.com>
• Re: [FEMM] Updated development version
  • From: "robert Macy" <macy@california.com>
• [FEMM] Force vs. Position for a Loudspeaker Motor
  • From: Bhatti <bhatti@enveng.titech.ac.jp>
• Re: [FEMM] Updated development version
  • From: David Meeker <dmeeker@ieee.org>
• [FEMM] matlab toolbox
  • From: David Meeker <dmeeker@ieee.org>
• [FEMM] ML3212.dll
  • From: "WW Koepsel" <wwkoepsel@mutronicsystems.com>
• Re: [FEMM] ML3212.dll
  • From: David Meeker <dmeeker@ieee.org>
• [FEMM] enquiry about linear motor!
  • From: Ahmad Eid <ahmad_m_eid@yahoo.com>
• [FEMM] some help regarding Lua script
  • From: Sarat Kumar Dash <rs_sarat@yahoo.com>
• [FEMM] need clarification
  • From: "ramadurai devi narayanan" <karuvelinarayanan@rediffmail.com>
• RE: [FEMM] enquiry about linear motor!
  • From: "Dr. Lee Marriott" <Marriott@tpresearch.com>
• [FEMM] complex permeability
  • From: Gilberto Fraga <fraga@if.ufrgs.br>
• Re: [FEMM] complex permeability
  • From: David Meeker <dmeeker@ieee.org>
• [FEMM] spiky flux plot 2
  • From: aaron cheng <acytmnt@yahoo.co.uk>
• [FEMM] Electromagnetic properties of steel
  • From: Wijono <wijono@yahoo.com>
• Re: [FEMM] spiky flux plot 2
  • From: Keith Gregory <K.Gregory@lboro.ac.uk>
• Re: [FEMM] Electromagnetic properties of steel
  • From: "Antonio F.R. Carabio" <ingacarabio@fibertel.com.ar>
• RE: [FEMM] enquiry about linear motor!
  • From: Ahmad Eid <ahmad_m_eid@yahoo.com>
• Re: [FEMM] Electromagnetic properties of steel
  • From: Wijono <wijono@yahoo.com>
• [FEMM] ActiveFEMM
  • From: Andhi Mardjono <andhez@yahoo.com>
• Re: [FEMM] ActiveFEMM
  • From: David Meeker <dmeeker@ieee.org>
• RE: [FEMM] enquiry about linear motor!
  • From: "Dr. Lee Marriott" <Marriott@tpresearch.com>
• [FEMM] some lua questions
  • From: RONALD.SALESKY@checkpt.com
• Re: [FEMM] Updated development version
  • From: Dave Squires <djsquires@plix.com>
• [FEMM] Bug report
  • From: Dave Squires <djsquires@plix.com>
• Re: [FEMM] Updated development version
  • From: Wijono <wijono@yahoo.com>
• Re: [FEMM] some lua questions
  • From: David Meeker <dmeeker@ieee.org>
• Re: [FEMM] Updated development version
  • From: David Meeker <dmeeker@ieee.org>
• [FEMM] Another lua question
  • From: "Fabio" <fmilanesi@tin.it>
• [FEMM] Simple solenoid help
  • From: Kalpit V Desai <kvdesai@email.unc.edu>
• Re: [FEMM] Another lua question
  • From: David Meeker <dmeeker@ieee.org>
• Re: [FEMM] Simple solenoid help
  • From: David Meeker <dmeeker@ieee.org>
• Re: [FEMM] Simple solenoid help
  • From: Wijono <wijono@yahoo.com>
• [FEMM] problems with losses and inductance values
  • From: <gkoerich@brturbo.com>
• [FEMM] What's the problem for my analysis about cogging?
  • From: "강경호" <khmr@hanmail.net>
• [FEMM] Need help in analytical fitting of steel B-H curve
  • From: Tsarafidy RAMINOSOA <tsarafidy@yahoo.fr>
• Re: [FEMM] Need help in analytical fitting of steel B-H curve
  • From: "Chris Holt" <chris.c.holt@aeat.co.uk>
• RE: [FEMM] Need help in analytical fitting of steel B-H curve
  • From: "Dr. Lee Marriott" <Marriott@tpresearch.com>
• Re: [FEMM] Need help in analytical fitting of steel B-H curve
  • From: Keith Gregory <K.Gregory@lboro.ac.uk>
• Re: [FEMM] Need help in analytical fitting of steel B-H curve
  • From: Tsarafidy RAMINOSOA <tsarafidy@yahoo.fr>
• [FEMM] problem with LUA script
  • From: aaron cheng <acytmnt@yahoo.co.uk>
• Re: [FEMM] problem with LUA script
  • From: "Fabio" <fmilanesi@tin.it>
• Re: [FEMM] problems with losses and inductance values
  • From: David Meeker <dmeeker@ieee.org>
• Re: [FEMM] Need help in analytical fitting of steel B-H curve
  • From: "Antonio F.R. Carabio" <ingacarabio@fibertel.com.ar>
• [FEMM] help regarding solenoid design
  • From: "Raman Bedi" <bedir@nitj.ac.in>
• Re: [FEMM] Need help in analytical fitting of steel B-H curve
  • From: "Chris Holt" <chris.c.holt@aeat.co.uk>
• [FEMM] message vanished
  • From: "Cheng, Y." <yc6@leicester.ac.uk>
• [FEMM] Temperature effect study with femm?
  • From: Senthil Ram <ndsr_99@yahoo.com>
• [FEMM] lua to output B field
  • From: Steven Adeff <adeffs@rpi.edu>
• Re: [FEMM] help regarding solenoid design
  • From: everest <evelect@vsnl.com>
• Re: [FEMM] lua to output B field
  • From: Steven Adeff <adeffs@rpi.edu>
• [FEMM] force output format?
  • From: Steven Adeff <adeffs@rpi.edu>
• Rif: Re: [FEMM] lua to output B field
  • From: giovanni.bortolan@sogagroup.com
• [FEMM] Accuracy error
  • From: Dewald Pieterse <s99224055@tuks.co.za>
• [FEMM] [cogging torque problem???]
  • From: "강경호" <khmr@hanmail.net>
• Re: [FEMM] [cogging torque problem???]
  • From: David Meeker <dmeeker@ieee.org>
• [FEMM] Femm 4.0 Post Processor scripting
  • From: "Andy Reding" <ATReding@GWLISK.com>
• Re: [FEMM] Accuracy error
  • From: David Meeker <dmeeker@ieee.org>
• [FEMM] lua addmaterial() parameters
  • From: RONALD.SALESKY@checkpt.com
• Re: [FEMM] lua addmaterial() parameters
  • From: David Meeker <dmeeker@ieee.org>
• Re: [FEMM] Femm 4.0 Post Processor scripting
  • From: David Meeker <dmeeker@ieee.org>
• [FEMM] getpointvalues use
  • From: RONALD.SALESKY@checkpt.com
• Re: [FEMM] getpointvalues use
  • From: Steven Adeff <adeffs@rpi.edu>
• Re: [FEMM] getpointvalues use
  • From: David Meeker <dmeeker@ieee.org>
• [FEMM] Modeling a LVDT
  • From: aneshan@netzero.com
• [FEMM] error in fkern-FEMM 4
  • From: Ahmad Eid <ahmad_m_eid@yahoo.com>
• Re: [FEMM] error in fkern-FEMM 4
  • From: David Meeker <dmeeker@ieee.org>
• [FEMM] Unexpected inductances values!
  • From: Ahmad Eid <ahmad_m_eid@yahoo.com>
• RE: [FEMM] Unexpected inductances values!
  • From: "Jiri Vecerka" <vecerkajiri@seznam.cz>
• [FEMM] Loading external data + Discrete magnets
  • From: Steffen Jankuhn/IOM <jankuhn@uni-leipzig.de>
• [FEMM] Max. Flux density in Silicon Steel
  • From: Wijono <wijono@yahoo.com>
• Re: [FEMM] Loading external data + Discrete magnets
  • From: David Meeker <dmeeker@ieee.org>
• [FEMM] Documentation on .ans file format
  • From: "Andy Reding" <ATReding@GWLISK.com>
• [FEMM] List shutting down
  • From: David Meeker <dmeeker@foster-miller.com>