[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [femm] How to define the current in a circuit

It's the total current in the circuit. The same value of current on each side defined as positive on one side of the coil and negative on the other.

Keith.

At 23:52 17/09/2003 -0700, you wrote:
Dear friends,

I am a new comer in using FEMM3.3. When I was learning
the example of DCMagnet, I was a little confused about
the definition of current in the circuit. Due to the
2-D effect, we have to draw two parts for one
excitation coil, and we have to define same current
value "plus" and "minus" circuit for them. What I want
to know is that the value of the current should be the
total current or half of the total current in the
practical coil. Any help will be appreciated.

Thanks

Lefu Zhang

__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/