[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [femm] GO Material
In a message dated 5/22/00 10:18:26 AM Eastern Daylight Time, fnent@xxxxxxx
writes:
> Can structures using Grain Oriented electrical steel be evaluated in
> Femm? I would like to observe the difference in flux patterns with GO and
> non-GO materials.
Well, you can assign different permeabilites in different directions in femm.
This might get you part of the way there. However, the model of saturation
currently used in femm isn't elaborate enough to correctly model the
difference between model grain-oriented and non-oriented materials in
saturation.
Dave.
--
http://members.aol.com/dcm3c