[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [femm] Force calculation on an axisymmetric model
The greater forces arised from femm calculations, with
a greater number of nodes.
> Again, I'd guess that the difference arises solely
from coarser the mesh
> density in the quickfield solution.
>
> At any rate a good way to get an idea of how many
digits you can believe in
> either a femm or quickfield force computation is to
integrate the stress on
> different contours around the part that you are
interested in. In an exact
> solution, the results should be identical. However,
the results from a
> finite element solution, which is only approximate,
will be slightly
> different. The differences between contours give you
an idea of the order
> of the error in the calculations.
>
> Dave.
>
>
> -------------------------- eGroups Sponsor
>
>
>