[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [femm] Fe2O3
I have a MH loop taken on a 5mm Sphere of iron oxide, but there is a problem
with the J(M) calibration of our loop. If you know the saturation, which I
believe is well defined for a particular temperature you could correct it.
Any use ?
The data is measured on a pulsed field magnetometer which we are developing
so if you had a sample of iron oxide we could measure it for you.
----- Original Message -----
From: Victor Bellido-Gonzalez <victor@xxxxxxxxxxxxxxxxxx>
To: <femm@xxxxxxxxxxx>
Sent: Wednesday, December 13, 2000 8:07 AM
Subject: [femm] Fe2O3
> Hi everyone,...
> I'll try again,... if no answers I'll assume that no one has the data I
> am looking for.
>
> Does anyone have the magnetic data B vs H for Iron (III) oxide,... any
> phase, e.g. gamma, etc.
>
> Regards,
> --
> ____________________________________________________
> Victor Bellido-Gonzalez
> GENCOA LTD
> 4-d Wavertree Boulevard South
> Wavertree Technology Park
> Liverpool L7 9PF
> U.K.
>
> Tel.: + 44 151 2522200 (International)
> 0151 2522200 (U.K.)
>
> Fax: + 44 151 2522233 (International)
> 0151 2522233 (U.K.)
>
> e-mail: victor@xxxxxxxxxxxxxxxxxx
> http://www.gencoa.com
> ____________________________________________________
>
>
>
>
- References:
- Fe2O3
- From: Victor Bellido-Gonzalez