Re: [femm] Re: FAQ - FEMM under GNU/Linux using Wine

[Keith Gregory <k.gregory@xxxxxxxxxxx>]

Just tried it on my office machine (a 300MHz Pentium II with 64MB) and it 
took just over two minutes (about 2:03) but this machine is running on a 
local network and could have lots of overheads. I'll try it on some others 
as I get the chance.

Keith.

At 04:17 28/06/01 +0000, you wrote:
> > The simple little test model I ran on my 500 MHz
> > PIII took 37 seconds to complete. I'd be interested
> > in hearing how that stacks up to a native windows
> > implementation. I posted the .fem definition in
> > the 'Files' area of this discussion group:
> > look for hollow-20.fem.
>
> I ran this problem on my old at-home machine with a screaming 200 MHz
> Pentium and 96MB of memory. It took 1:55 to complete from the time I
> pressed the "turn the crank" button until the solver was completely
> done writing the results to disk. If I assume that the solution time
> would scale linearly to a 500 MHz machine, 2/5 of the 200 MHz solution
> time is 46 seconds.
>
> Dave.
>
>
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Keith Gregory
Department of Electronic & Electrical Engineering
Loughborough University
Phone: 01509 227025 Fax: 01509 227014
Department web: http://www.lboro.ac.uk/departments/el/