[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [femm] Bug in move function
--- In femm@xxxxxxxxxxxxxxx, giovanni.bortolan@xxxx wrote:
>
> Thank you David,
> it was exactly as you supposed. That is a possible problem
> working with snap to grid
>
> Another small thing:
> When I mirror a geometry the magnetization direction of
> magnets is not mirrored, It seems to be not consistent with
> rotate operation.
Ok, I can readily duplicate this. Like you say, the magnet direction
should be changed so that it is mirrored as well. Thanks a lot for
pointing it out--I'll fix this in the next program update.
Dave.