Noe it works!!...gracias!
Juan A. Tapia
-----Mensaje
original-----
De: Dave Squires
[mailto:djsquires@xxxxxxxx]
Enviado el: Miércoles, 19 de Marzo
de 2003 16:35
Para: femm@xxxxxxxxxxxxxxx
Asunto: Re: [femm] torque calculation
example
You must select the red line contour button on the
left top
first then left click on each point definingthe
contour
clockwise starting on any point.
You must have just clicked on the contour line.
DRS
Juan Tapia wrote:
> I?m sorry?but It didn?t work. I solved the
problem, got the flux lines,
> but when I try to click on
> the center contour line. It is not selected?
What I did wrong?
>
>
>
> Juan
>
>
>
>
>
>
>
> -----Mensaje original-----
> De: Dave Squires [mailto:djsquires@xxxxxxxx]
> Enviado el: Miércoles, 19 de Marzo de2003
14:28
> Para: femm@xxxxxxxxxxxxxxx
> Asunto: Re: [femm] torque calculation example
>
>
>
> Here is a simple 2-pole motor example.
> Juan,
> Here is a very simple example.
> There are other ways, of course, but maybe
> this is good enough?
>
> No special boundary conditions are used.
> The mesh is 0.02" between the rotor and
stator
> magnets. Units are inches.
>
> Once simulated use FEMMVIEW then left click
on
> the center contour line between the rotor and
> stator magnets going clockwise.
> Then click on the integrate->torque
> from stress tensor selection.
>
> The gap is large to make it simple and so it
> runs fast. I used version 3.2.
>
> I hope this helps.
>
> DRS
>
> penquista66 wrote:
>> Hi Femm people
>>
>> I'm wondering if anyone can send a
simple torque example calculation.
>> I'm teaching an electromechanical
energy conversion class and I'll be
>> very interested to show to my
students the procedure to calculate
>> torque using FEMM with a simple
example.
>>
>> Thanks
>>
>> Juan A.
>>
>>
>>
>>
>>
>>
>> Your use of Yahoo! Groups is
subject to http://docs.yahoo.com/info/terms/
>>
>>
>>
>
>
>
> Your use of Yahoo! Groups is subject tothe
Yahoo! Terms of Service
> <http://docs.yahoo.com/info/terms/>.
>
>
>
> Yahoo! Groups Sponsor
> <http://rd.yahoo.com/M=245314.3072841.4397732.2848452/D=egroupweb/S=1705083663:HM/A=1495890/R=0/*http://www.netbizideas.com/yheb42
> >
>
>
> Your use of Yahoo! Groups is subject tothe
Yahoo! Terms of Service
> <http://docs.yahoo.com/info/terms/>.
Your use of Yahoo! Groups is
subject to the Yahoo! Terms of
Service.