Re: [femm] Vector plots + "zoomier"

[David Meeker <dmeeker@xxxxxxxx>]

Eric Vogels wrote:

> Hi David.
> Will it be possible to switch the new functions on and off with the 
> LUA script as well? 
> Thanks,
> Eric.

Yes, it's already in there. In both the belaview version and the 
femmview version, the lua command is:

showvectorplot(type,scalefactor)

In belaview, the parameters taken are the type of plot, which should be 
set to 0 for no vector plot, 1 for flux density /D/, and 2 for field 
intensity /E/. The scalefactor determines the relative length of the 
vectors. If the scale is set to 1, the length of the vectors are chosen 
so that the highest flux density corresponds to a vector that is the 
same length as the current grid size setting.

For the femmview version the type should be set to 0 for no vector plot, 
1 for a plot of Re[B], 2 for a plot of Re[H], 3 for a plot of Im[B], 4 
for a plot of Im[h], 5 for a plot of both Re[B] and Im[B], and 6 for a 
plot of both Re[H] and Im[H].

Dave.
--
David Meeker
email: dmeeker@xxxxxxxx
www: http://femm.berlios.de/dmeeker