jens2504@xxxxxx wrote:
hej everybody,I'm not quite sure what you're trying to do, but it sounds like you might have a problem that is really 3D. FEMM can presently address only problems that can be idealized as 2D planar or axisymmetric geometries.I just joined the group in hope you could help me. I want to
calculate and plot the magnetic flux density in a copper solenoid,
which curved of 90°. The diameter of the 20 copper turns is 6.5cm.
I thought it might work to use a one symmetry axis for one turn, so
that I would have 20 axis' and then my hope was to group them, but
unfortunately it didnt work out. Either I use the group function
wrong or the way I thought is just impossible.
anyway, if somebody could give me an advise or some help I would be
really glad.
Thank you very much.
Dave.
begin:vcard n:Meeker;David tel;fax:781-890-3489 tel;work:781-684-4070 x-mozilla-html:TRUE url:http://members.aol.com/_ht_a/dcm3c org:Foster-Miller, Inc.;Electrical and Electronic Systems Group version:2.1 email;internet:dmeeker@xxxxxxxxxxxxxxxxx title:Senior Engineer adr;quoted-printable:;;350 Second Avenue=0D=0A;Waltham;MA;02451-1196;USA fn:David Meeker, Ph.D. end:vcard