RE: [femm] Default view settings

["Carl Kopin" <ckopin@xxxxxxxxxxxxxxxxxxx>]

Dear C.Prem Kumar,

Thanks, I did all that before, This is true for new blank window ONLY! And it is OK. But the newly created drawing should keep the grid size that it was created with, not the new window default.

The problem is that the preferred grid size does not stay with new created and saved drawing. For example, I created new drawing with 0.1 mm grid size(set in preferences) and as soon I saved it, closed it and opened it againthe default grid size has changed to 1 mm (WHY?) regardless of preference setting. What the drawing should default to upon opening it is not the gridsize setting in the preferences but drawing setting upon saving. That is the problem that I have described originally. The similar problem is with the post-processor that should open the answer window with the settings that were set while solving the problem.

There is even worse case where the default grid size was 10 and I have created drawings with grid manually set to 0.1 mm; now when I open them they always default to grid size 10! And I am not able to change them to default to size 0.1 on open.

I think it would be good idea to have grid control through the Lua script too for both, pre- and post-processor. When I need to make changes I have tochange manually the grid size every time after reloading the drawing either manually or through the Lua script.

Thanks, but the problem still remains unchanged.
Carl

-----Original Message-----
From: Prem Kumar C [mailto:prem@xxxxxxxxxxxxx] 
Sent:	Friday, 08 February 2002 20:09
To:	femm@xxxxxxxxxxxxxxx
Subject:	Re: [femm] Default view settings

<< File: Card for C.Prem Kumar >> Carl :
It's very simple.
In the Pre-processor(Editor) window select Edit/Preferences. You can set them all as per your choice. The THREE Check Boxes can be set to ON. Just Click OK thereon. Exit Editor. Once again open the Editor - you'll find
the settings present.
Likewise in the Post-processor(femm- viewer) in the Edit/ Preferences menu you'll find a similar table of Options. You can set them all to your liking. Click on OK. Close the window. The settings actuate on re-opening
femm-view.
Go on Carl .... Experiment with it ... !!
Remember .... F in FEMM stands for fabulous ...!!

C.Prem Kumar


Carl Kopin wrote:

> Dear Group
>
> does anyone know how to set grid size on an existing femm file that wouldstay permanently and not default to 10 or any other number every time I open this file? Similar problem with the result files (post-processor).
>
> Thanks,
> Carl
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/


 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/