Re: [femm] Re: Axi-symmetric arcs for FEMMVIEW

[Dave Squires <djsquires@xxxxxxxx>]

Jiri,
Hey thanks. I guess I did miss something.
That works very nicely. It is one of those
neat tricks I did not see in the manual.
I noticed that you have to be careful of the
starting point to get a clockwise directed contour
or you can get a reversed sign for the torque.

Thank you sir,
Dave Squires

vecerkaj wrote:

>
> Hi
> If you want to make arc contour in Femmview, the simplest way is to
> make that contour as an arc in FEMM (before solving the problem).
> After that, if you try to make contour in FEMMVIEW (as a straight
> line) i.e. you choose the endpoints of arc (by left button of
> mouse), FEMMVIEW recognises the arc and highlight the arc.
>
> In LUA scripting, if you want use that funcionality, you have to make
> contour by "selectpoint(x,y)" instead of "addcontour(x,y)", which
> makes all the time just straight contour.
>
> Jiri Vecerka
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/