[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [femm] Re: Voice Coil Motor with Aluminum bobbin

To: femm@xxxxxxxxxxxxxxx
Subject: Re: [femm] Re: Voice Coil Motor with Aluminum bobbin
From: David Meeker <dmeeker@xxxxxxxx>
Date: Tue, 27 May 2003 10:52:07 -0400
In-reply-to: <bavs0n+ftcc@eGroups.com>
References: <bavs0n+ftcc@eGroups.com>
User-agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.3.1; MultiZilla v1.4.0.3J) Gecko/20030425

tano1938 wrote:

Would it be OK to model the Alnico magnet with a linear material like
you suggest, and use the published "recoil permeability" of Alnico 5,
which is about 5.0?

Ron

Yes, this is a reasonable way to proceed. Also, this previous post might be relevant to you: http://groups.yahoo.com/group/femm/message/1678 -- David Meeker email: dmeeker@xxxxxxxx www: http://femm.berlios.de/dmeeker

References:
- Re: Voice Coil Motor with Aluminum bobbin
  - From: tano1938

Prev by Date: Re: Voice Coil Motor with Aluminum bobbin
Next by Date: Speed Sensor
Previous by thread: Re: Voice Coil Motor with Aluminum bobbin
Next by thread: Minor updates
Index(es):
- Date
- Thread